Prof. Shikhar Jha
Email: skjha@iitk.ac.in
Department of Material Science and Engineering, IITK
webpage: https://home.iitk.ac.in/~skjha/
Prof. Tanmoy Maiti
Email: tmaiti@iitk.ac.in
Department of Material Science and Engineering, IITK
webpage: https://home.iitk.ac.in/~tmaiti/
Prof. Shobit Omar
Email: somar@iitk.ac.in
Department of Material Science and Engineering, IITK
webpage: https://home.iitk.ac.in/~somar/
The objective of this course is to provide an advanced understanding of ceramics and composites for various functional applications in the field of electronics, space, defense, energy and biology. The course intends to render a detailed understanding of physics and chemistry behind the designing of novel functional ceramic materials and their composites with metals or polymers. The emphasis will be given on the importance of ceramic processing with respect to defect chemistry in order to improve functional properties of ceramics. The advanced ceramic processing such as Flash Sintering, Spark-plasma sintering, additive manufacturing and ceramic coating will be discussed. Furthermore, non-linear properties of ceramic materials will be discussed using matrix and Tensor method in correlation with crystal symmetry. State-of-the-art problems and challenges will be explained to provide a better appreciation of ceramic materials and devices.
Date Time |
1 March 2021 | 2 March 2021 | 3 March 2021 | 4 March 2021 | 5 March 2021 | 6 March 2021 |
---|---|---|---|---|---|---|
9:00 AM - 10:15 AM |
Introduction to Ceramics and Composites (Prof. Shikhar Krishna Jha) |
Ceramic Powder Processing (Prof. Shikhar Krishna Jha) |
X-ray Diffraction (Prof. Anandh Subramaniam) |
Tensors and Physical Properties: Higher rank tensor (Prof. Tanmoy Maiti) |
Additive Manufacturing of Ceramics (Prof. Shikhar Krishna Jha) |
Molecular Dynamic Simulations in Ceramics (Prof. Rakesh Behera) |
10:30 AM - 11:45 AM |
Crystal Structure & Symmetry: Symmetry Operators, Introduction to Point group and Space group (Prof. Tanmoy Maiti) |
Ceramic Sintering (Prof. Shikhar Krishna Jha) |
Electrical Characterization of Ceramics (Prof. Shobit Omar) |
Tensors and Physical Properties: Introduction to point group, Neumann’s law, 1st rank tensor (Pyroelectric Coefficient) (Prof. Tanmoy Maiti) |
Bio ceramics (Prof. Kantesh Balani) |
Density Functional Theory Calculations in Ceramics (Prof. Rakesh Behera) |
12:00 PM - 1:15 PM |
Point Defects in Ceramics (Prof. Shobit Omar) |
Advanced Sintering Techniques (Flash sintering, Spark Plasma Sintering, etc.) (Prof. Shikhar Krishna Jha) |
Electrochemical Impedance Spectroscopy (Prof. Shobit Omar) |
Diffusion and Electrical Conductivity (Prof. Shobit Omar) |
Case Study: Thermoelectric Materials (Prof. Tanmoy Maiti) |
Case Study: Li-ion Batteries (Prof. Shobit Omar) |
2:00 - 3:15 PM |
Defect Chemistry of Metal Oxides (Prof. Shobit Omar) |
Ceramic Coating & Composites (Prof. Tanmoy Maiti/Prof. Shikhar Krishna Jha/SO) |
Electron Microscopy (Prof. Anandh Subramaniam) |
Ferroelectrics, Antiferroelectrics and Multiferroics (Prof. Tanmoy Maiti) |
Case Study: Solid Oxide Fuel Cells (Prof. Shobit Omar) |
Case Study: Capacitors, Piezoelectric Sensors & Actuators (Prof. Tanmoy Maiti) |
3:20 - 4:10 PM |
Demonstration & Interactive Session: Pyro/Piezo/Ferro-electric measurement (Prof. Tanmoy Maiti) |
Demonstration & Interactive Session: Ceramic Processing (Tape Casting, Spin Coating) (Prof. Shikhar Krishna Jha/ Prof. Shobit Omar) |
Demonstration & Interactive Session: (a) XRD (GB) (b) SEM (SS) |
Demonstration & Interactive Session: Fabrication of SOFCs (Prof. Shobit Omar) |
Demonstration & Interactive Session: Rietveld Analysis of XRD Data (Prof. Shobit Omar) |
Interactive Session, Valedictory Session & Certificate Distribution |
4:10 PM - 5:00 PM |
Demonstration & Interactive Session: Grain Size Estimation Analysis (Prof. Shikhar Krishna Jha) |
Demonstration & Interactive Session: Ceramic Processing (Flash Sintering, Spark Plasma) (Prof. Shikhar Krishna Jha) |
Demonstration & Interactive Session: Thermoelectric Measurements (Prof. Tanmoy Maiti) |
Demonstration & Interactive Session: Fabrication of Batteries (Prof. Shobit Omar) |
Demonstration & Interactive Session: Electrochemical Impedance Spectroscopy (Prof. Shobit Omar) |
Prof. Shobit Omar
Department of Material Science and Engineering,
IIT Kanpur
Email: somar@iitk.ac.in
Prof. Tanmoy Maiti
Department of Material Science and Engineering,
IIT Kanpur
Email: tmaiti@iitk.ac.in
Prof. Anandh Subramaniam
Department of Material Science and Engineering,
IIT Kanpur
Email: anandh@iitk.ac.in
Prof. Kantesh Balani
Department of Material Science and Engineering,
IIT Kanpur
Email: kbalani@iitk.ac.in
Prof. Shikhar Krishna Jha
Department of Material Science and Engineering, IITK
Email: skjha@iitk.ac.in
Prof. Rakesh Behera
Mechanical & Aerospace Engineering
Tandon School of Engineering, New York University
Email: rakesh.behera@nyu.edu
1. Faculty from AICTE Institutes coming under QIP program (maximum 30) |
No Registration fees |
2. Faculty from private/autonomous Institutions: Non IITK Faculty |
Rs. 5,900/- (Including GST) |
3. Students of IITK IITK Student |
Rs. 3,000/- (No. GST Required) |
4. Students from other Educational Institutions: Non IITK Students |
Rs. 3,540/- (Including GST) |
5. Participant from Industry and R&D labs: Industrial Participant |
Rs. 11,800/- (Including GST) |
Step 1: Make Payment according to your category
Instructions, How to Pay? Click Here
Online Payment Link: Click Here
Note down Transaction Number, this will required while registration.
Course Code | 2020/026 |
Course Title | Advanced Ceramics and Composites |
Course Duration | 01/03/2021 to 06/03/3021 |
Participants Category Course Fees + 18% GST IITK Students needs to pay only course FEE |
IITK Student (Rs. 3000/-) Non IITK Student (Rs. 3,540/-) Non IITK Faculty (Rs. 5,900/-) Industrial Participants (Rs. 11,800/-) |
Vinay Kumar
QIP IIT Kanpur
Email: qip@iitk.ac.in
Phone: 0512-259-7795
Yogendra Singh
QIP IIT Kanpur
Email: cdte@iitk.ac.in
Phone: 0512-259-7795
Webpage: www.iitk.ac.in/cce/Yogi/