Past Members

Dr. Biswarupa Samantaray

PhD (2024)

Thesis Title: Interdiffusion in Bond Coat Systems of Pt Based Ni-aluminides
Current Position: fare fellow iit kanpur

Dr. Susanta Nayak

PhD (2024)

Thesis Title: Investigations of Vacancy Kinetics, Interdiffusion and Thermodynamic Activities in Multicomponent Alloys
Current Position: fare fellow iit kanpur

Dr. Gyanendra Pratap Singh Chauhan

PhD (2022)

Thesis Title: Interdiffusion in BCC Ti- Al-Mo Alloys at 1100 ºC
Current Position: deputy manager sunflag iron and steel

Dr. Vivek Verma

PhD (2022)

Thesis Title: Investigations into Interdiffusion in Quinary Fe-Ni-Co-Cr-Mn and Quaternary Fe-Ni-Co-Cr High Entropy Alloys
Current Position: Assistant Professor IIT Indore

Dr. G. Mohan Muralikrishna

PhD (2020) & Co-PI: Dr. B.S.Murty

Thesis Title: Synthesis and Atomic Transport Properties Multicomponent B2 Aluminides
Current Position: Assistant Professor IIT Patna

Dr. Aparna Tripathi

PhD (2020)

Thesis Title: Study of interdiffusion in BCC Ti-Al-Nb and Ti-Al-Mn alloys, and the effect of varying molar volume on interdiffusion analysis
Current Position: Assistant Professor IIT Roorkee

Dr. Sumeet Mishra

PhD (2017) & Co-PI: N. P. Gurao

Thesis Title: Experimental and Theoretical Investigations of the Effect of Precipitates on Mechanical Behavior and Deformation Texture of an Aluminum -Magnesium-Silicon Alloy
Current Position: Assistant Professor IIT Roorkee

Mr. Manoj Kumar

M.Tech. (2023) & Co-PI: Dr. Vaibhav Arghode

Thesis Title: Behaviour of Various Alloys in High Temperature Solar Thermal Device
Current Position: N.A

Ms. Srivalli

M.Tech.(2022)

Thesis Title: Interdiffusion studies in ALNICO magnetic alloy system
Current Position: Product Development Engineer at Micron Technology

Mr. Kunwar Shivam Pratap

M.Tech. (2022) & Co-PI: Dr. Sandip Patil , Director, eSpin Nanotech

Thesis Title: Development of Low-Cost β-Titanium Alloy for Bio-implant Applications
Current Position: Doctoral Scholar at Montanuniversität Leoben

Mr. Darla Vinay Kumar

M.Tech. (2021)

Thesis Title: Effect of Varying Molar Volume on Experimental Determination of Binary Interdiffusion Coefficients
Current Position: N.A

Mr. Abhishek Kumar

M.Tech. (2021)

Thesis Title: Effect of Varying Molar Volume on Experimental Determination of Binary Interdiffusion Coefficients in Cu-Ni, Fe-Ni and Ti-Mo Binary Alloy
Current Position: Officer IOCL

Mr. Mohd. Riyaz

M.Tech. (2020)

Thesis Title: Investigations into the Effect of Interdiffusivity Matrix on the Diffusion Profiles of Ternary Diffusion Couples
Current Position: N.A

Mr. Krishna Teja

M.Tech. (2020)

Thesis Title: Effect of Angle Between Composition Vectors on Determination of Ternary Interdiffusion Coefficients
Current Position: Deputy manager at JSW Steel

Mr. Ankit Kumar

M.Tech. (2019) & Co-PI: Kallol Mondal

Thesis Title: Enhanced Gold-Enrichment on the Surface of Ag-20 wt% Au and Cu-20wt% Au Alloys by De-alloying in a Novel Electrolyte
Current Position: N.A

Ms. Nidhi Sharma

M.Tech. (2019)

Thesis Title: Diffusion Bonding and Brazing of Similar and Dissimilar Materials using Ni-Mn Based Multicomponent Filler Alloy
Current Position: N.A

Mr. Dinesh Kumar

M.Tech. (2018)

Thesis Title: Effect of Cryo-Forging and other Heat Treatment parameters on the Grain Boundary Morphology of AA 7075 Alloy
Current Position: N.A

Mr. Bhargav Krishna

M.Tech. (2018)

Thesis Title: Experimental Evaluation of Quaternary Isotherm of Fe-Ni-Co-Cu System from Multiphase Diffusion Experiments
Current Position: Materials Scientist/Researcher at Research, Technology and Innovation Center

Mr. Vikrant Kumar Beura

M.Tech. (2016)

Thesis Title: Investigations into Microstructure Evolution in Brazed Joints of Silver Copper Alloy and Aluminum Bronze with Austenitic-Martensitic Stainless Steel Prepared with Ag-Cu-based Brazing Filler Alloys
Current Position: Packaging R&D Engineer, Intel

Mr. Bhupinder Kumar Dangi

M.Tech. (2016)

Thesis Title: Effect of Alloying Elements on Growth Kinetics of Intermetallic Layer Formed at Interface between Fe and Al6061 Aluminum Alloy
Current Position: N.A

Ms. Sayli Jambhulkar

M.Tech. (2016)

Thesis Title: Investigation of Interdiffusion and Diffusional Interactions in Ternary Ti-Al-Mo Alloys
Current Position: Pathfinding Packaging R&D Engineer

Mr. Amit Das

M.Tech. (2015) & Co-PI: Dr.Shobit Omar

Thesis Title: Hot Corrosion of Stabilized Zirconia Thermal Barrier Coatings and the Role of Magnesium Inhibitor
Current Position: Scientist-C, ARCI Hyderabad

Mr. Gangadharan

M.Tech. (2015)

Thesis Title: Microstructure Evolution in Brazing Joints of 0.07C-16Cr-6Ni Steel and Silver Obtained with a Ag-Cu-Sn Filler Metal
Current Position: Doctoral scholar at lulea university of technology sweden

Mr. Ashish Kasar

M.Tech. (2015)

Thesis Title: Effect of Copper on Properties of Aged A-354 based Cast Aluminum Alloys
Current Position: Material Engineer at Tesla

Mr. Biswanath Paira

M.Tech. (2014) & Co-PI: Dr.Krishanu Biswas

Thesis Title: Microstructural Development of Nb-Based Multicomponent Alloys for Atomic Energy Applications
Current Position: Battery Manufacturing Engineer at Ford Motors

Mr. Vivek Verma

M.Tech. (2014)

Thesis Title: Interdiffusion in Ti-Nb and Ti-Al Systems
Current Position: Assistant Professor IIT Indore