Enable JavaScript in your browser for better experience.

All Archives

Magnet Ki Pol Khol (Mar 13, 2021)

Material Advantage IIT Kanpur student's chapters organized a lecture named "Magnet Ki Pol Khol" by Padma Shri Professor H. C. Verma on March 13, 2021 (Saturday). The lecture started at 3:00 PM by welcoming words of Prof. Kantesh Balani in honor of prof. H. C. Verma. In this lecture, Prof. Verma covered the basic principle of magnet to advance research on the magnet. He also clarified the myths and facts about magnet and magnetic properties. The lecture ran for 2 hours in which students also clarified their doubts in the end.


Sponge Ironmaking (Jan 31, 2021)

Material Advantage, IIT Kanpur Chapter organized an interactive session on "Sponge Ironmaking" : "An Alternate Ironmaking Technology" on 31st January 2021 at 10 AM via ZOOM.Speaker for the session was Dr B.B. Agrawal, who briefly discussed about sponge ironmaking technology and explained how sponge iron has established itself as an excellent metallic substitute to steel scrap for electric steelmaking and basic oxygen steelmaking in the converter.The session lasted for an hour in which Dr. Agrawal briefly discussed various technologies of sponge ironmaking keeping various entrance examinations including GATE in mind. Apart from this, he also spent a bit of time on numerical problems related to sponge ironmaking in which students were discussed the techniques to deal with those problems.


XRD Workshop(Jan 27, 2021)

MA@IITK in association with department of Material Science & Engineering, IIT Kanpur organized a lecture on X-Ray Diffraction for MA members. This lecture was a part of XRD workshop which was conducted in two parts: 1 - Theory & principles (Speaker: Dr. Nilesh Gurao) 2 - Analysis via XPERT HIGHSCORE. The first part of the workshop was conducted in ollaboration with the TEQIP workshop. The workshop started with welcome words by Dr. Kantesh Balani and over 40 members attended it in which the students learnt the basics of XRD and cleared their queries towards end the workshop.


Annual Christmas cum New Year Celebration(Dec 31, 2020)

Annual Christmas cum New Year Celebration: The Annual Christmas cum New Year Celebration was organized by Material Advantage IITK on December 31, 2020 virtually to bid goodbye to the year 2020 together with gaiety and joy with the members. The team organised many virtual games while the members socialised to know each other better.


One on one Mock Interview(Nov 29, 2020)

Material Advantage student's chapter organized "One on one Mock Interview " series for the students who are sitting for placement session of 2020-21. Interviews were taken from 25th-29th November 2020 for various core companies like TATA STEEL, JP Mittal etc. Several students were interviewed by our alumni, who are already placed. HR as well as technical mock interviews were conducted.


Questionnaire Session(Nov 10, 2020)

On Nov 10, 2020, a session was conducted on possible questionnaire from Steel Companies by Dr. B.B. Agrawal, Visiting Professor IIT Kanpur who also has 35 years of experience in steel plant. It was an initiative to augment the success rate for our students in Placement Process.


Lucky Draw (Oct 14, 2020)

Lucky draw was conducted among the most active participants to waive of partial and complete membership fees. The lucky draw was done live on October 14, 2020 by spinning a wheel using an online application. Winners: Kaushal (100% Discount) Jatin Jain (50% Discount).


Workshop on LaTeX software (Oct 12, 2020)

Material Advantage @ IIT Kanpur initiated a workshop on LaTeX document writing on Oct. 12,2019 (Afternoon Session) by Dr. Somnath Bhowmik (Assistant Professor, Material Science and Engineering Department, IIT Kanpur) and Mr. Pawan Tripathi (PhD student, MSE Department, IIT Kanpur).


Panel Discussion on Career opportunities after CoVID (Oct 10, 2020)

MA@IITK conducted an interactive panel discussion session on career opportunities on October 10, 2020. MA@IITK brought professionals from different sectors. Dr. Kantesh Balani, Chapter Advisor, himself, was the moderator for this event. The panelists were Dr. J. Ramkumar, Dr.B.B. Agarwal, Dr. S.S. Singh and Mohd. Shafiq.


E- demonstration on Tribological Analysis & Instruments (Oct 05, 2020)

The Session of E- demonstration on Tribological Analysis & Instruments taken on October 05, 2020. This demonstration was conducted in association with DUCOM instruments. Dr.Debdutt Patro (Product Specialist, Marketing & Application, DUCOM) led this demonstration and exhibited various facilities to the students attending this event. This also included introduction to DUCOM's digital platform to learning- MOOHA.


Case Study on Rail Degradation and Failure (Oct 03, 2020)

Material Advantage IIT Kanpur chapter organized a case study on Rail degradation and failure on Saturday, 3rd October 2020. The session was conducted by Prof. Gouthama, Department ofMaterial science and engineering, IIT Kanpur. Through this session Prof. Gouthama explained each and every aspect of rail degradation in detailed manner.


Talk on "How to write a Research Article" (Oct 02, 2020)

Material Advantage @ IIT Kanpur organized an e-session on research paper writing on October 2, 2020. The session was conducted by Prof. Balani, Chapter Advisor, MA @ IIT Kanpur.


Micrography Contest (28 September - 04 October 2020)

Micrography contest was organized from September 28 to October 4, 2020, in which students participated enthusiastically from various departments like MSE, MSP, Chemical, Chemistry and Physics. Winner:Category A (SEM): Bidisha Bhatt (Winner), Ekta Shrivastava (Runner up), Gaurav Kumar (Runner up). Category B (OM):Sarvesh Swamy (Winner), Ubaid Bhatt (Runner up)


Meme Competition (26 September - 03 October 2020)

Meme Competition was organized as a fun activity for IITK students. The event was conducted through Facebook at "Material Advantage IIT Kanpur Chapter" page from September 26 to October 03. Winner: Souvik Dinda


Workshop On ANSYS Fluent By Mr. Zeeshan Alam (26-27 September 2020)

As a part of Material Advantage @IITK, membership drive, two-day e-workshop on Ansys fluent has been organized on 26-27 September 2020. This workshop was conducted by Mr. Zeeshan Alam (Senior Engineer, Reliance Industries Pvt. Ltd.). Speaker started with the basic introduction about the Ansys and CFD followed by hands on training.


Talk On Research Paper Along With A Patent (24 September 2020)

MA@IITK organized a session on writing a research article along with a patent. This e-session was conducted by Mr. Ravi Pandey, REO, IP & Tech Transfer, SIIC, IITK on September 24, 2020 (afternoon Session). In this talk the speaker disseminated the nuances of filing of a Patent application by students at IIT Kanpur.


Locked Up With Hobby (20 - 26 September 2020)

MA@IITK organized another fun event named "Locked up with hobbies" from September 20 to September 26, 2020, to provide an opportunity to the students to share their lockdown hobby stories. The event was conducted online. Winners: Digital Winner: Shipra Bajpai, PhD MSE department Runner Up: Anupam Halder, M.Tech MSE department & Sejal Malu, M.Tech, AE department Vocal- Winner- Swapnil Sawalkar, M.Tech, MSE department Motion- Winner- Pranjal Rudrakshi, BS, Physics Department Other- Winner- Zainul Abedin, PhD, MSE Department


Faculty Development Program On Novel Materials With REC Banda (18 - 22 September 2020)

MA@IITK associated with Rajkiya Engineering College, Banda for conduction of Faculty Development Program on NOVEL MATERIALS with speakers from various prestigious institute such as IIT Kanpur, IIT Bombay, IIT Roorkee, etc. It was a five day program from September 18 - September 22, 2020.


COVID: CALAMITY & Inventions (16 September 2020)

The session was conducted over ZOOM on September 16, 2020 (evening session). The inventions discussed were Oxygen Concentrator by Dr. S.K. Jha, Swasa N95 Face mask by Dr. Sandip Patil and Mobile masterJee by Dr. J.Ramkumar. MA@IITK brought such innovators under one umbrella during this event, where these people talked about the story of their invention even when there was a limited availability of resources and manpower. These inventions are highly appreciated by the honorable Prime Minister.


Introduction To MA@IITK & Unveiling Membership Drive (14 September 2020)

Introduction to MA@IITK & Unveiling Membership Drive Date: September 14, 2020 Time: 03:00 PM


Frontier Lectures Series 2020-21 (28th August 2020)

MA@IITK organises Frontier Lectures series every year. The very first talk of Frontier lecture series of the academic year 2020-2021 is scheduled on August 28, 2020, at 4 pm. Speaker: Prof. Raj Pala, Dept. of Chemical Engineering Title: "Goodenough" Quantum Mechanics and a first-principle approach towards designing cathodes for Lithium-ion-batteries Date: August 28, 2020 Time: 04:00 PM Venue: Online


Thoughts In Motion An Online Presentation Contest (15th August 2020)

Thoughts In Motion, an Online presentation contest on 15th August, 2020. There are four Catergories of submission Materials Processing Characterization Perfomance or properties know more...


Online Training Program For Scanning Electron Microscopy (27-29 July 2020)

Material Advantage, IITK chapter is organizing a 3 days online training program for Scanning Electron Microscopy from a practical point of view. SEM is a powerful investigation tool. In addition to topographical, morphological and compositional information, SEM can detect and analyze surface fracture, provide information in microstructure, and examine surface contamination. It can also reveal spatial variations in chemical composition, provide qualitative chemical analysis and identify the crystalline structure. Keeping in mind the current situation, as most of the students are detached from their experimental work, we will face an urgent rush to complete our thesis on returning back to campus. Characterization and analysis will play an important role for most of us. A better understanding of SEM will make us well equipped with this characterisation technique. This workshop will help in building basic knowledge about SEM and the analysis of images using ImageJ software. All enthusiastic people are cordially welcome. Hoping for participation in large numbers for our benefit. Kindly register yourself for this using the link provided below. The mode of conduction of this training will be online (preferably ZOOM) and the event will tentatively occur during 27-29 July 2020. The last date for registration is 19 July 2020 (23:59 hrs). click here for registration


Thoughts In Motion An Online Presentation Contest (16th July 2020)

Thoughts In Motion, an Online presentation contest on 16th July, 2020. There are four Catergories of submission Materials for energy Biomaterials Smart Materials Advanced Ceramics


Script It, An Online Article Contest (08th July, 2020)

Script It, an Online article contest on 08th July, 2020. There are two Catergories of submission Technical: Scalability from Materials Science point of View Non-Technical: Is Online Education and work from home to stay safe after corona.


Look Around Event (06th July, 2020)

Look Around an Online event was organized 06 June 2020. Name of winners: UG category: 1st: Pradeep Gupta, UIET CSJMU PG category: 1st: Zuveria Firdouz, 2nd: Shipra Bajpai, 2nd: Shashikant Gupta


Talk by Prof. Dasari L. V. K. Prasad on study of Super conductivity

After membership drive was over one more talk was organized by Material Advantage as a part of “Frontier Lecture Series” by Dr D.L.V.K.Prasad, Dept. of Chemistry, IIT Kanpur, on 5 Nov. 2019 (Afternoon session) in IIT Kanpur. A recent report from India on the possibility of near ambient conditions superconductivity has stirred up lot of excitement. This lecturehas taken us deep into this new realm.


Membership Help Desk

To assist the students in the registration process, a help desk was set up on Oct. 14, 2019 (Afternoon and Evening Sessions). Those who had won membership discounts as awards in various competitions held during the membership drive period came along with their coupons and existing MA members assisted them in getting their forms processed smoothly. Many students did not have credit cards to make the payment. In such cases, the existing members volunteered to make the payment using their own cards. We made a note of the membership ID for each newly recruited member. Since it was the last day of the membership drive, we motivated everyone passing by to join our drive. More than 30 students became MA members for the first time and 5 existing members renewed their memberships. Apart from this, 5 existing members are from the graduating batch and so, they aren't required to renew their membership. This year's membership drive was a great success at Material Advantage @ IIT Kanpur.


LaTeX workshop

LaTeX has a prominent role in the preparation and publication of books and articles that contain complex multilingual materials. To accommodate students with the structure and to break the phobia of writing in latex, Material Advantage @ IIT Kanpur initiated a workshop on LaTeX document writing on Oct. 12, 2019 (Afternoon Session). Both undergraduate as well as postgraduate students attended this workshop. The workshop was conducted in two sessions of two hours each. Two sessions were organized in the workshop. Session 1 included writing of basic structure, special characters and symbols, equations and formulae, including figure and table and some common errors whereas session 2 included indexing, bibliography, formatting options, documentation (thesis, research paper, thesis etc). Best performing students were awarded discounted memberships so as to catalyze them towards becoming a material advantage member during our recruitment drive.


Material Advantage Fun morning

A fun morning was organised on Oct. 12, 2019 (Forenoon Session) to relieve all the academic stress and to promote the importance of healthy lifestyle among the students. The participants were divided into teams of two and a dodge-the-ball match marked the onset of the fun event. This was followed by many interesting cup and balloon games such as the little hearts, one-minute games such as hit the-cup, blow-and-throw. After this the students had juice and snacks, post which they played dumb charades in teams. It was a much-needed fun event and everyone suggested that we make this a weekly affair.


SEM facility & Biomaterials lab visit for CSJM university students

Students from UIET, CSJM University Kanpur were invited to visit the IIT Kanpur campus on Oct. 04, 2019 (Forenoon Session), to attend a guided tour of the Laboratory for Biomaterials and the Scanning Electron Microscopy facility on campus. 10 students attended this visit, and got to see various equipments that are used in materials research. A demonstration of each of the instruments was given by trained persons at IIT Kanpur. The students were amazed to see the equipments, especially the SEM facility about which they had just studied in their class few weeks ago. In the Laboratory for Biomaterials, several other facilities were demonstrated to the students. Compression Moulding facility, Fretting Wear Testing facility, contact angle Goniometer, and Cell culture facility are some of them. These demonstrations helped to inculcate a sense of research among the students. Students found it interesting to correlate their theory lessons with what was being demonstrated to them during this visit. Many of them expressed their interest to be an active part of more such lab visits in near future.


Micrography Contest

Micrography contest on was organized Oct. 04, 2019 (Afternoon Session) in which students from seven different departments of the institute including Material Science and Engineering, Material Science Programme, Mechanical Engineering, Chemical Engineering, Biological Sciences and Bio-engineering, Chemistry, and Physics, participated. A total of 69 entries were received. The micrographs were divided into three broad categories viz Optical Microscopy, Scanning Electron Microscopy and Transmission Electron Microscopy. There were three judges, two from Material Science and Engineering Department and one from Biological Sciences and Bioengineering Department. Technical content, aesthetics (visual aspect) and expertise of the techniques were the main criteria for selection of best micrograph. Winners from each category were awarded with Material Advantage membership discount coupons and prizes. The event was sponsored by Lucknow Scientific & Surgicals, and IIT Kanpur Souvenir shop. They had also put up stalls where they displayed various products that they deal with and offered exclusive discounts for IIT Kanpur students.


Talk on Optics by Prof. Harshawardhan Wanare

Material Advantage @ IIT Kanpur conducted its first talk of the “UNDERSTANDING” lecture series on Oct. 03, 2019 (Afternoon Session) in IIT Kanpur. Prof. Harshawardhan Wanare, Department of Physics, IIT Kanpur, presented a lecture on "Understanding Imaging" describing various aspects of the electromagnetic radiation such as its spectrum, polarization, and coherence aspects, developing an understanding of conventional notions of imaging and the accompanying limitations. Some elegant and powerful ideas have addressed many of these limitations. These ideas are simple to understand, and yet their implementation has been a challenge, and overcoming these challenges has historically led to multiple Nobel prizes. The speaker explained each of the selected topics with various examples such as formation of rainbow, color of sky and sea etc. More than 100 people from IITK community (faculty as well as students) joined in on this saga of pursuit `towards perfection’.


Industry visit to Anod Plasma Spray Ltd.

As a part of the Material Advantage membership drive, students from the Department of Materials Science & Engineering, IIT Kanpur visited Anod Plasma Spray Ltd. on Sep. 28, 2019 (Morning Session).They were introduced to practical aspects of metallurgy through various facilities such as, atmospheric plasma spray, vacuum plasma spray, HVOF etc, with emphasis on significance of binder and other subsequent thermal barrier coatings. They also got to witness the process of manufacturing rotogravure printing cylinders which have immense use these days. In a section of the plant, students also saw the making of plastic bottles by stretch blow molding. Various non-destructive techniques of detecting cracks were demonstrated with the help of actual samples from the industry. The most intriguing part of the trip was the realization of the scale at which the work is carried out in an industry as compared to the labs in the institute. The refurbishing work on the parts of turbine engines was a magnum opus in itself. The heat treatment of these huge parts requires furnaces of the same scale and students were flabbergasted to see the gigantic atmospheric and vacuum arc furnaces. The trip was mentored by Prof. Kantesh Balani, faculty advisor of Material Advantage @ IIT Kanpur. The guided tour was hosted by Mr. Ritik Tondon, Managing Director, Anod Plasma Spray Ltd. This tour certainly added a new dimension to the theoretical knowledge which the students gain in classrooms.


Two-minute Thesis contest

To polish the oratory and convincing skills of our students, Material advantage @ IIT Kanpur organized a “Two-minute thesis contest” for the postgraduate students of Materials science and engineering department on Sep. 27, 2019 (Evening Session) as a part of membership drive. We accommodated 30 participants on first-cum-first basis. The agenda of the contest was to speak for a minute about one’s thesis followed by a minute on an impromptu topic (totally crazy and unrelated to Materials Science). One of the judges was from the Department of Humanities, so the major task was to make him understand one's thesis in a minute. All the participants performed really well. Freshmen were graded separately in the Beginners' category. Top three contestants from both categories received membership discounts of 75%, 50% and 25%, respectively.


Talk on "How to write a paper" by Prof. Kantesh Balani

Material Advantage @ IIT Kanpur, along with the Academics and Career Council of the institute organized a session on research paper writing on Sep. 25, 2019 (Evening Session). The session was conducted by Prof. Balani, Chapter Advisor, MA @ IIT Kanpur. Research paper writing is one thing that all of the Masters and Ph.D. students are involved with at some point of time in their academic career. The session focused on many key factors which most people tend to neglect or are unaware of. Things like preparing abstract, key conclusions, highlights, and figure files were very helpful. All these technical and formatting tips were beautifully weaved along interesting stories and take-home messages which allowed everyone to follow the pace of instruction and remember the details in a proper way. Over 200 students, from across all the departments of the institute attended this session. It was a full-house. The Academics and Career Council plans to conduct more such events every semester.


Lecture on Understanding SEM

As a part of Materials Advantage Membership Drive, Materials Advantage @ IIT Kanpur conducted an outreach programme at MSME Department, UIET, CSJM University Kanpur on Sep. 19, 2019 (Forenoon Session). The event was organised in a way to instill basic understanding lectures for the students of UIET, by the faculty and research scholars of IIT Kanpur. Dr. Kantesh Balani delivered a talk on "Understanding SEM", where he enlightened the crowd with the basics of Scanning Electron Microscopy. He discussed electron beam interaction with sample, significance of depth of field versus depth of focus, aperture size, various imaging modes, etc


Material Advantage quiz for B.Tech. Students

To get the undergraduate students excited for material advantage, MA @ IIT Kanpur conducted a quiz for the students of Chatrapati Sahuji Maharaj University Kanpur on Sep. 19, 2019 (Forenoon Session). The quiz had multiple choice questions from general materials science and basic metallurgy. The event was named after MATerial Advantage. The students were given 30 questions which they had to answer in 15 minutes. Around 75 students participated in the quiz. After the quiz, all the questions were discussed and correct answers were revealed to the students in their classroom. The quiz papers were evaluated by MA volunteers and results were declared on the same day. Top three positions were awarded based on the score in quiz. The winners were provided with discounted memberships for becoming members of the Material Advantage along with certificates of merit and lots of goodies and prizes.


Series of 5 talks in "For your Information" session

To inculcate basic understanding of prime topics in materials science, MA @ IIT Kanpur conducted a series of talks in the session titled “For your Information” on Sep. 19, 2019 (Afternoon Session). This coved a vast spectrum of basic material science through topics such as Dislocation and Plasticity by Mr. Prince Setia, Into the World of Crystals by Mr. Rupesh Chafle, Significance of Fe-C Phase Diagram by Ms. Reshma Sonkusare. Mr. Shashikant Gupta and Mr. Mirtunjay Kumar also provided their valuable insights on Energy Harvesting based on Piezoelectricity & Triboelectricity and Correct and Incorrect Phase Diagram Features respectively. This event enlightened the undergraduate students with information at par along with a curiosity to learn more and be a part of MA@IITK’s extended family at UIET. It was indeed a fun and informative event!


Participation at TMS annual technical meet (11th March, 2019 - 15th March, 2019)

Two students from the Material Advantage @IIT Kanpur chapter attended TMS annual technical meet 2019 conference held in San Antonio, Texas, USA. They presented their area of research through oral as well as poster presentations. Students also monitored for the sessions. Both students received the TMS Travel grant award of ($400) for attending this conference. Students got to interact with a number of patrons in their field of research. This conference gave a profound exposure to the students and motivated them to strive harder and do meaningful research.


Material Advantage Member-get-a-Member drive (February, 2019)

One of our students Mr. Rupesh Chafle participated in the recruitment drive held in February 2019 and won $400; whereas the new member who got recruited (Ms. Reshma Sonkusare) won a prize money of $100. Their names were also featured in the Material Advantage April 2019 newsletter.



List generated in 0.2592649460 sec