ME741A
|
INTERNAL COMBUSTION ENGINES, POLLUTION AND CONTROL
|
|
|
Summary:
Fundamental Principles of Engine Design: Stages of Combustion, Combustion Equations, Heat of Combustion, Thermodynamic analysis of SI Engine combustion process: Thermo-Chemistry; Chemical Equilibrium, Equilibrium Combustion Products, Flame Propagation in Engines, Unburned and Burned Mixture States, In-cylinder Flow-Field Measurement: Fuel Injection, Measurement of In-cylinder Mixture Distribution, Fuel-Air-Mixing and Burning Rates in CI Engines, Engine Combustion and Flame Visualization. Data Acquisition System: Combustion and Heat Release Analysis in Engines. Major Pollutants & Formation Mechanisms, Measurement and Test Procedures. Control of Emissions from SI and CI Engines: Thermal Reactors, Catalytic Converters and Catalysts, Fuel Modifications, Engine Noise.
Lecture Wise Breakup
S. No.
|
Topic
|
1.
|
Fundamental Principles of Engine Design-1
|
2.
|
Fundamental Principles of Engine Design-2
|
3.
|
Air-fuel Ratio, Flammability Limits
|
4.
|
Stages of Combustion
|
5.
|
Heat of Combustion, Adiabatic Flame Temperature, Reaction Rates-1
|
6.
|
Heat of Combustion, Adiabatic Flame Temperature, Reaction Rates-2
|
7.
|
Thermodynamic analysis of SI Engine combustion process; Thermo-Chemistry-1
|
8.
|
Thermodynamic analysis of SI Engine combustion process; Thermo-Chemistry-2
|
9.
|
Thermodynamic analysis of SI Engine combustion process; Thermo-Chemistry-3
|
10.
|
Chemical Equilibrium: Equilibrium Combustion Products, Low Temperature Combustion Products, High Temperature Combustion Products
|
11.
|
Flame Propagation in Engines; Unburned and Burned Mixture States; Flame Quenching
|
12.
|
In-cylinder Flow-Field Measurement-1
|
13.
|
In-cylinder Flow-Field Measurement-2
|
14.
|
In-cylinder Flow-Field Measurement-3
|
15.
|
Fuel Injection, Spray Atomization, Penetration and Evaporation
|
16.
|
Measurement of In-cylinder Mixture Distribution-1
|
17.
|
Measurement of In-cylinder Mixture Distribution-2
|
18.
|
Fuel-Air-Mixing and Burning Rates in CI Engines; Engine Combustion and Flame Visualization-1
|
19.
|
Fuel-Air-Mixing and Burning Rates in CI Engines; Engine Combustion and Flame Visualization-2
|
20.
|
Data Acquisition System-1
|
21.
|
Data Acquisition System-2
|
22.
|
Pollutants from Engines
|
23.
|
Formation of NOx, HC, CO Mechanism-1
|
24.
|
Formation of Soot
|
25.
|
Measurement Techniques and Test Procedure
|
26.
|
NDIR
|
27.
|
FID, Chemiluminescent Analyzers
|
28.
|
Smoke Meters
|
29.
|
Design of Engines for Controlling Emissions from SI and CI Engines-1
|
30.
|
Design of Engines for Controlling Emissions from SI and CI Engines-2
|
31.
|
Optimum Selection of Operating Variables for Control of Emissions-1
|
32.
|
Optimum Selection of Operating Variables for Control of Emissions-2
|
33.
|
EGR, Thermal Reactors, Secondary Air Injection-1
|
34.
|
EGR, Thermal Reactors, Secondary Air Injection-1
|
35.
|
Catalytic Converters and Catalysts-1
|
36.
|
Catalytic Converters and Catalysts-2
|
37.
|
Catalytic Converters and Catalysts-3
|
38.
|
Fuel Modifications and Additives-1
|
39.
|
Fuel Modifications and Additives-2
|
40.
|
Introduction of Noise Norms and Measurement Procedures
|
Recommended Text Books:
-
Internal Combustion engine fundamentals: J B Heywood, Mc-Graw Hill Publications, 1989.
-
Gasoline Engine Management: Robert Bosch GMBH, 2005.
-
Diesel Engine Management: Robert Bosch GMBH, 2005.
-
Advanced Engine Technology: Heinz Heisler ISBN 0340568224, SAE Publications, 2004.
-
Engine Combustion Instrumentation and Diagnostics: Hua Zhao, Nicolas Ladammatos, SAE International 2001
-
Internal Combustion Engine Handbook (Basics, Components, Systems, and Perspectives), Richard Van Basshuysen and Fred Schafer, SAE International, 2004.
-
Automotive Mechanics, William H Crousem Donald L Anglin, Tata McGraw Hill, 2007
|