Kumar, Surendra; Jahan, Kousar; Verma, Abhishek; Agarwal, Manan; and Chandraprakash, Chindam, “Agar-based composite films as effective biodegradable sound absorbers,” ACS SUSTAINABLE CHEMISTRY & ENGINEERING, vol. 10, no. 26, 8242--9253, 2022.

Sharma, Vyom; Chandraprakash, Chindam, “Quasi-superhydrophobic microscale two-dimensional phononic crystals of stainless steel 304,” JOURNAL OF APPLIED PHYSICS, vol. 131, no. 18, 184901, 2022.

Kumar, Santosh; Edachery, Vimal; Velpula, Swamybabu; Govindaraju, Avinash; Choudhury, Sounak K.; Kailas, Satish V., Influence of surface roughness, friction coefficient, and wrap angle on clinching joint strength and its correlation with belt friction phenomenon, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol.236, 2022.

Singh, Manmeet; Bhattacharya, Jishnu; Sharma, Manoj Kumar, Computational prediction of significant efficiency gain through multi-tank modular heat storage for solar thermal systems with variable-temperature input profile (vol 18, 100551, 2020), THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.29, 2022.

Sharma, Manoj Kumar; Bhattacharya, Jishnu, Finding optimal operating point for advection-cooled concentrated photovoltaic system, SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, Vol.49, 2022.

Kumar, Jitendra; Dutta, Ashish, Energy optimal motion planning of a 14-DOF biped robot on 3D terrain using a new speed function incorporating biped dynamics and terrain geometry, ROBOTICA, Vol.40, 2022.

Thekkepat, Ananthakrishna Ayankalath; Devadula, Sivasrinivasu; Law, Mohit, Identifying Joint Dynamics in Bolted Cantilevered Systems Under Varying Tightening Torques and Torsional Excitations, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol.10, 2022.

Mishra, Bal Krishan; Gupta, Archana; Panigrahi, P. K., Near-wall characteristics of wall-normal jets generated by an annular dielectric-barrier-discharge plasma actuator, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.

Jindal, Puneet; Katiyar, Raunak; Bhattacharya, Jishnu, Evaluation of accuracy for Bernardi equation in estimating heat generation rate for continuous and pulse-discharge protocols in LFP and NMC based Li-ion batteries, APPLIED THERMAL ENGINEERING, Vol.201, 2022.

Shah, Ram Krishna; Khandekar, Sameer, On-demand augmentation in heat transfer of Taylor bubble flows using ferrofluids, APPLIED THERMAL ENGINEERING, Vol.205, 2022.

Prasad, Niraj Kr; Shome, Rajib; Biswas, Gautam; Ghosh, Siddhartha Sankar; Dalal, Amaresh, Transport Behavior of Commercial Anticancer Drug Protein-Bound Paclitaxel (Paclicad) in a Micron-Sized Channel, LANGMUIR, Vol.38, 2022.

Khan, Basheer A.; Saha, Arun K., Turbulent flow and heat transfer characteristics of an impinging jet over a heated wall-mounted cube placed in a cross-flow, PHYSICS OF FLUIDS, Vol.34, 2022.

Patel, Arjun; Talaviya, Devang Kumar; Law, Mohit; Wahi, Pankaj, Optimally tuning an absorber for a chatter-resistant rotating slender milling tool holder, JOURNAL OF SOUND AND VIBRATION, Vol.520, 2022.

Singh, Atinder Pal; Ghoshdastidar, P. S., Computer Simulation of Heat Transfer in Alumina and Cement Rotary Kilns, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.14, 2022.

Sekar, Dhileepan; Venkadesan, Gnanamoorthi; Panithasan, Mebin Samuel, Optimisation of dry cell electrolyser and hydroxy gas production to utilise in a diesel engine operated with blends of orange peel oil in dual-fuel mode, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.47, 2022.

Srinivasan, V; Madanan, U.; Goldstein, R. J., Turbulent Rayleigh-Benard convection of compressed gas: effect of sidewall thermal conductance, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.182, 2022.

Das, Santanu Kumar; Dalal, Amaresh; Breuer, Michael; Biswas, Gautam, Evolution of jets during drop impact on a deep liquid pool, PHYSICS OF FLUIDS, Vol.34, 2022.

Agarwal, Avinash Kumar; Jiotode, Yeshudas; Sharma, Nikhil, Time-Resolved Endoscopic Evaluation of Spatial Temperature and Soot Distribution in a Butanol-Diesel Blend Fueled Direct Injection Compression Ignition Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.

Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Kumar, Vikram, Reactivity Controlled Compression Ignition Engine Fueled With Mineral Diesel and Butanol at Varying Premixed Ratios and Loads, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.

Agarwal, Avinash Kumar; Prashumn; Chandra, Krishn, Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-I: Technical feasibility, FUEL, Vol.308, 2022.

Agarwal, Avinash Kumar; Prashumn; Valera, Hardikk; Mustafi, Nirendra Nath, Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-II: Unregulated and particulate emission characteristics, FUEL, Vol.308, 2022.

Gupta, Saurabh; De, Santanu; Loha, Chanchal; Karmakar, Malay, Effects of drag and subgrid-scale turbulence modeling on gas-solid hydrodynamics of a pilot-scale circulating fluidized bed, CHEMICAL ENGINEERING SCIENCE, Vol.248, 2022.

Chauhan, Pankaj Singh; Kumar, Kuldeep; Singh, Kirtiman; Bhattacharya, Shantanu, Fast decolorization of rhodamine-B dye using novel V2O5-rGO photocatalyst under solar irradiation, SYNTHETIC METALS, Vol.283, 2022.

Bangari, Raghubeer S.; Yadav, Anshul; Awasthi, Prachi; Sinha, Niraj, Experimental and theoretical analysis of simultaneous removal of methylene blue and tetracycline using boron nitride nanosheets as adsorbent, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.634, 2022.

Bangari, Raghubeer S.; Yadav, Anshul; Bharadwaj, Jayam; Sinha, Niraj, Boron nitride nanosheets incorporated polyvinylidene fluoride mixed matrix membranes for removal of methylene blue from aqueous stream, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.10, 2022.

Gupta, Shreshtha K.; Palulli, Rahul; Talei, Mohsen; Gordon, Robert L.; Arghode, Vaibhav K., CO modelling of premixed head-on quenching flame in the context of Large-Eddy Simulation, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.93, 2022.

Mahata, Avik; Mukhopadhyay, Tanmoy; Zaeem, Mohsen Asle, Modified embedded-atom method interatomic potentials for Al-Cu, Al-Fe and Al-Ni binary alloys: From room temperature to melting point, COMPUTATIONAL MATERIALS SCIENCE, Vol.201, 2022.

Zafar, M. Rashid; Basu, Sumit, Stiffness and toughness of soft, liquid reinforced composites, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.159, 2022.

Kumar, Prem; Gachake, Mayur; Khandekar, Sameer, Effect of wick oxidation on the thermal performance of a copper-acetone loop heat pipe, APPLIED THERMAL ENGINEERING, Vol.200, 2022.

Chatterjee, Shilpi; Kumar, Indradev; Ghanta, Kartik Chandra; Hens, Abhiram; Biswas, Gautam, Insight into molecular rearrangement of a sessile ionic nanodroplet with applied electric field, CHEMICAL ENGINEERING SCIENCE, Vol.247, 2022.

Singh, Manish; Pandey, Animesh; Gupta, Anurag, Interaction of a defect with the reference curvature of an elastic surface, SOFT MATTER, Vol.18, 2022.

de Moura, Braion B.; Machado, Marcela R.; Mukhopadhyay, Tanmoy; Dey, Sudip, Dynamic and wave propagation analysis of periodic smart beams coupled with resonant shunt circuits: passive property modulation, EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, Vol.231, 2022.

Dwivedi, Raghvendra Kumar; Jain, Vandana; Muralidhar, K., Dynamic contact angle model for resolving low-viscosity droplet oscillations during spreading over a surface with varying wettability, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.

Singh, Raghvendra Pratap; Yadav, Rahul; Muralidhar, Krishnamurthy; Das, Malay K., Effect of confined boundary and mud-layers on depressurization-based gas recovery and land subsidence in hydrate reservoirs, MARINE GEORESOURCES & GEOTECHNOLOGY, Vol.40, 2022.

Sharma, Deepak Kumar; Sikarwar, Basant Singh; Upadhyay, Sumant; Kumar, Ranjit; Avasthi, D. K.; Ranjan, Mukesh; Srivastava, Sanjeev Kumar; Muralidhar, K., Super-Hydrophobic Nanostructured Silica Coating on Aluminum Substrate for Moist Air Condensation, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.

Sharma, Vyom; Gyanprakash, Maurya D.; Gupta, Prateek; Ramkumar, Janakarajan, Analysis of circuit current in electrochemical micromachining process under the application of different waveforms of pulsed voltage, JOURNAL OF MANUFACTURING PROCESSES, Vol.75, 2022.

Singh, A.; Mukhopadhyay, T.; Adhikari, S.; Bhattacharya, B., Active multi-physical modulation of Poisson's ratios in composite piezoelectric lattices: On-demand sign reversal, COMPOSITE STRUCTURES, Vol.280, 2022.

Sharma, Nikhil; Agarwal, Avinash Kumar, Microscopic spray characteristics of ethanol and methanol blended gasoline in a direct injection spark ignition engine, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.23, 2022.

Yadav, Anshul; Sinha, Niraj, Nanomaterial-based gas sensors: A review on experimental and theoretical studies, MATERIALS EXPRESS, Vol.12, 2022.

Sreejiti, Vattaparambil Sreedharan; Tiwari, Nachiketa, Design Sensitivity Studies on a Hydroacoustic Projector Using an Experimentally Validated Easy-to-Build Model, ARCHIVES OF ACOUSTICS, Vol.47, 2022.

Rajput, Arun; Ramkumar, J.; Mondal, K., Effect of Vibratory Tip Amplitude on the Erosion Rate of Various Microstructures of High Carbon Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.

Chattaraj, Sandipan; Basu, Sumit, Coarse-graining strategies for predicting properties of closely related polymer architectures: A case study of PEEK and PEKK, JOURNAL OF MATERIALS RESEARCH, Vol.37, 2022.

Somwanshi, Praveen M.; Cheverda, V. V.; Muralidhar, K.; Khandekar, S.; Kabov, O. A., Understanding vertical coalescence dynamics of liquid drops over a superhydrophobic surface using high-speed orthographic visualization, EXPERIMENTS IN FLUIDS, Vol.63, 2022.

Singh, Gaganpreet; Mishra, Deepak; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha, Large area fabrication of single micron features using two-photon polymerization with sub-nanosecond laser, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.236, 2022.

Sarkar, Shubhabrata; Wahi, Pankaj; Munshi, Prabhat, Super Resolution CT Imaging Using Higher Order Total Variation (HOTV) Technique, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, Vol.71, 2022.

Rout, Anil Kumar; Nanda, Soumya Ranjan; Sahoo, Niranjan; Kalita, Pankaj; Kulkarni, Vinayak, Soft Computing-A Way Ahead to Recover Heat Flux for Short Duration Experiments, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.14, 2022.

Sharma, Manoj Kumar; Bhattacharya, Jishnu, Dependence of spectral factor on angle of incidence for monocrystalline silicon based photovoltaic solar panel, RENEWABLE ENERGY, Vol.184, 2022.

Gowthaman, S.; Tripathi, Pragya; Ariharan, S.; Ramkumar, Janakarajan; Balani, Kantesh, Water attenuation enhances tribological damage resistance in laser peened steel, MATERIALS LETTERS, Vol.308, 2022.

Gupta, Akash K.; Yadav, Rahul; Das, Malay K.; Panigrahi, Pradipta K., Implementation of a multi-layer radiation propagation model for simulation of microwave heating in hydrate reservoirs, INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, Vol.32, 2022.

Katiyar, Shubhi; Dutta, Ashish, Dynamic path planning over CG-Space of 10DOF Rover with static and randomly moving obstacles using RRT* rewiring, ROBOTICA, Vol.40, 2022.

Ojha, Abhilash; Anas, Mohammad; Ranjan, Avishek; Joshi, Pranav; Verma, Mahendra K., Helicity segregation by Ekman pumping in laminar rotating flows with gravity orthogonal to rotation, PHYSICAL REVIEW FLUIDS, Vol.7, 2022.

Bhardwaj, Abhinav; Singh, Gaganpreet; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Polarization-Insensitive Optically Transparent Microwave Metamaterial Absorber Using a Complementary Layer, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol.21, 2022.

Rajput, Arun; Ramkumar, J.; Mondal, K., Cavitation Resistance of a Cr-Mn Stainless Steel, A Mild Steel, and A High-Carbon Steel Based on Rust Protectivity and Corrosion Behavior, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.31, 2022.

Sharma, Nikhil; Agarwal, Avinash Kumar, Particulate Emission Reduction by Fuel Injection Timing Optimization in a Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.144, 2022.

Inturi, Dakshina Murthy; Lovaraju, P.; Tanneeru, Srinivasa Rao; Rathakrishnan, E., Effect of Eccentricity on Co-flow Jet Characteristics, IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, Vol.46, 2022.

Sharma, Rohit; Gupta, Prateek; Singh, Raghuraj, Hypergeometrically Represented Responsive and Reliable Cloud Service Model for Personal and Private Clouds, WIRELESS PERSONAL COMMUNICATIONS, Vol. 125, 2022.

Singh, Raghuraj; Sharma, Rohit; Gupta, Prateek, Resource provisioning optimisation for cloud computing systems serving multi-class requests, INTERNATIONAL JOURNAL OF AD HOC AND UBIQUITOUS COMPUTING, Vol. 40, 2022.

Thangadurai, Murugan; Kundu, Abhishek; Biswas, Gautam, Analysis of shock wave-boundary layer interaction in a shock tube using higher order scheme, COMPUTERS & FLUIDS, Vol. 236, 2022.

Mandal, Vijay; Sharma, Shashank; Singh, Sudhanshu S.; Ramkumar, J., Laser Surface Texturing in Powder Bed Fusion: Numerical Simulation and Experimental Characterization, METALS AND MATERIALS INTERNATIONAL, Vol. 28, 2022.

Varshney, A.; Mondal, K.; Sangal, S., Cold work induced stability of retained austenite at elevated temperature in a medium carbon high silicon steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 832, 2022.

Passarella, Linsey S.; Mahajan, Salil; Pal, Anikesh; Norman, Matthew R., Reconstructing High Resolution ESM Data Through a Novel Fast super Resolution convolutional Neural Network (FSRCNN), GEOPHYSICAL RESEARCH LETTERS, Vol. 49, 2022.

Rahaman, A.; Kar, Kamal K., Hierarchical epoxy based composites prepared by chemical vapor deposition of carbon nanocoils on glass fibers, COMPOSITE INTERFACES, Vol. 29, 2022.

Katiyar, Shubhi; Dutta, Ashish, Comparative analysis on path planning of ATR using RRT*, PSO, and modified APF in CG-Space, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, 2022.

Katiyar, Shubhi; Dixit, Prakash Mahadeo, Simulation of softening in high pressure torsion process using continuum damage mechanics model, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 236, 2022.

Pratap, Dheeraj; Shah, Ram Krishna; Khandekar, Sameer; Soni, Sanjeev, Photothermal effects in small gold nanorod aggregates for therapeutic applications, APPLIED NANOSCIENCE, Vol. 12, 2022.

Rout, Anil Kumar; Nanda, Soumya Ranjan; Sahoo, Niranjan; Kalita, Pankaj; Kulkarni, Vinayak, Implementation of Soft Computing Technique for Recovery of Impulsive Heat Loads, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 36, 2022.

Gupta, Nitish Kumar; Singh, Gaganpreet; Wanare, Harshawardhan; Ramakrishna, S. Anantha; Srivastava, Kumar Vaibhav; Ramkumar, J., A low-profile consolidated metastructure for multispectral signature management, JOURNAL OF OPTICS, Vol. 24, 2022.

Yadav, Anshul; Patel, Raj Vardhan; Singh, Chandra Prakash; Labhasetwar, Pawan Kumar; Shahi, Vinod Kumar, Experimental study and numerical optimization for removal of methyl orange using polytetrafluoroethylene membranes in vacuum membrane distillation process, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol. 635, 2022.

Tyagi, A.; Kar, K. K., Proliferation of pH-universal oxygen reduction performance by morphology modulation in NiS-N,S doped carbon microflowers, MATERIALS TODAY SUSTAINABILITY, Vol. 17, 2022.

Verma, Kapil Dev; Sinha, Prerna; Ghorai, Manas K.; Kar, Kamal K., Mesoporous electrode from human hair and bio-based gel polymer electrolyte for high-performance supercapacitor, DIAMOND AND RELATED MATERIALS, Vol. 123, 2022.

Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Tan, Wai Kian; Moshkalev, Stanislav A.; Matsuda, Atsunori; Kar, Kamal K., Heteroatom doping of 2D graphene materials for electromagnetic interference shielding: a review of recent progress, CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, Vol. 47, 2022.

Sauer, Roger A.; Duong, Thang X.; Mandadapu, Kranthi K., A chemo-mechano-thermodynamical contact theory for adhesion, friction, and (de)bonding reactions, MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 27, 2022.

Khanna, Sourav; Singh, Preeti; Mudgal, Vijay; Newar, Sanjeev; Sharma, Vashi; Becerra, Victor; Reddy, K. S.; Mallick, Tapas K., Novel thermal conductivity enhancing containers for performance enhancement of solar photovoltaics system integrated with phase change material, ENERGY, Vol. 243, 2022.

Fan, Yaohui; Wu, Yifan; Dale, Travis F.; Lakshminarayana, Sukshitha Achar Puttur; Greene, Colin, V; Badwe, Nilesh U.; Aspandiar, Raiyo F.; Blendell, John E.; Subbarayan, Ganesh; Handwerker, Carol A., Influence of Pad Surface Finish on the Microstructure Evolution and Intermetallic Compound Growth in Homogeneous Sn-Bi and Sn-Bi-Ag Solder Interconnects, JOURNAL OF ELECTRONIC MATERIALS, Vol. 50, 2022.

Raina, Deepak; Gora, Sunil; Maheshwari, Dheeraj; Shah, Suril, V, Impact modeling and reactionless control for post-capturing and maneuvering of orbiting objects using a multi-arm space robot, ACTA ASTRONAUTICA, Vol.182, 2021.

Zafar, M. Rashid; Basu, Sumit, Axisymmetric capillary bridges of soft solids with surface elasticity, MECHANICS OF MATERIALS, Vol.155, 2021.

Zafar, M. Rashid; Basu, Sumit, Calibrating surface hyperelastic constitutive models in soft solids, PHYSICAL REVIEW E, Vol.103, 2021.

Kumar, Santosh; Singh, K. K.; Ramkumar, J., The effects of graphene nanoplatelets on the tribological performance of glass fiber-reinforced epoxy composites, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol.235, 2021.

Mariappan, Murugan; Panithasan, Mebin Samuel; Venkadesan, Gnanamoorthi, Pyrolysis plastic oil production and optimisation followed by maximum possible replacement of diesel with bio-oil/methanol blends in a CRDI engine, JOURNAL OF CLEANER PRODUCTION, Vol.312, 2021.

Kumar, Jitendra; Dutta, Ashish, Learning-Based Motion Planning of a 14-DOF Biped Robot on 3D Uneven Terrain Containing a Ditch, INTERNATIONAL JOURNAL OF HUMANOID ROBOTICS, Vol.18, 2021.

Nagendra Reddy, B. V. S.; Saxena, Anupam, Topology Synthesis of a Three-Kink Contact-Aided Compliant Switch, JOURNAL OF MECHANICAL DESIGN, Vol.143, 2021.

Gupta, Archana; Mishra, Bal Krishan; Panigrahi, P. K., Internal and external hydrodynamics of Taylor cone under constant and alternating voltage actuation, PHYSICS OF FLUIDS, Vol.33, 2021.

Mathur, Girijesh; Tiwari, Nachiketa; Chaturvedi, Neha, Numerical and Experimental Studies of Ballistic Compression Process in a Soft Recovery System, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Tripathi, Aditya; Bej, Nilotpala; Das, Satyabati, Membranes for Carbon Dioxide Separation on a Small Scale: State of Art, Challenges and Applications, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.9, 2021.

Rai, Amit K.; Gupta, Shakti S., Nonlinear vibrations of a thin isotropic circular plate subjected to moving point loads, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol.235, 2021.

Khatik, Vitthal; Nishad, Shyam Sunder; Saxena, Anupam, Comprehending Optimality of Finger Flexor Tendon Pulley System Using Computational Analysis, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Kumar, Adarsh; Ray, Bahni; Biswas, Gautam, Dynamics of two coaxially rising gas bubbles, PHYSICS OF FLUIDS, Vol.33, 2021.

Deep, Charan; Pratihar, A. K.; Sharma, M. K., Freezing time-temperature behavior and parametric study of cylindrical shaped tylose gel samples: A numerical and experimental study, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.24, 2021.

Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Vapor mediated interaction of two condensing droplets, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.608, 2021.

Erelli, Ramesh; Saha, Arun K., Experimental and Numerical Investigation of Flow and Heat Transfer in Stationary Two-Pass Rectangular Duct (AR=1:2) With Continuous and Broken V-Shaped Ribs, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.

Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Role of melt flow dynamics on track surface morphology in the L -PBF additive manufacturing process, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.178, 2021.

Sonker, Rohit; Dutta, Ashish, Adding Terrain Height to Improve Model Learning for Path Tracking on Uneven Terrain by a Four Wheel Robot, IEEE ROBOTICS AND AUTOMATION LETTERS, Vol.6, 2021.

Behera, Sachidananda; Saha, Arun K., Effect of inlet shear on turbulent flow past a wall-mounted finite-size square cylinder, OCEAN ENGINEERING, Vol.234, 2021.

Yadav, Om Prakash; Vyas, Nalinaksh S., Stick-slips and jerks in an SDOF system with dry friction and clearance, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.137, 2021.

Narne, Vijaya Kumar; Sreejith, V. S.; Tiwari, Nachiketa, Long-Term Average Speech Spectra and Dynamic Ranges of 17 Indian Languages, AMERICAN JOURNAL OF AUDIOLOGY, Vol.30, 2021.

Sharma, Basant Lal, A dislocation-dipole in one-dimensional lattice model, PHILOSOPHICAL MAGAZINE, Vol.101, 2021.

Singh, Pradeep; Sarkar, S., Excitation of Shear Layer Due to Surface Roughness Near the Leading Edge: An Experiment, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Singh, Swati; Saha, Arun K., Numerical study of flow and heat transfer during a high-speed micro-drop impact on thin liquid films, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.89, 2021.

Sreejith, V. S.; Tiwari, Nachiketa, Influence of compliance, and effective orifice discharge coefficient on performance of a hydroacoustic projector, APPLIED ACOUSTICS, Vol.177, 2021.

Chouksey, Mayank; Basu, Sumit, Exploration of subsequent yield surfaces through unit cell simulations, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.219, 2021.

Haider, Nirmal; Saha, Arun K.; Panigrahi, P. K., Enhancement in Film Cooling Effectiveness Using Delta Winglet Pair, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.

Sharma, Manoj Kumar; Pratihar, Anil Kumar, Study of Heat Transfer and Freezing Time-Temperature Behavior of Individual Pea Grains by Numerical and Experimental Methods, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.

Mimani, A., A point-like enhanced resolution of experimental Aeolian tone using an iterative point-time-reversal-sponge-layer damping technique, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, Vol.151, 2021.

Mishra, Ashish Kumar; Upadhyay, Ram Krishna; Kumar, Arvind, Surface Wear Anisotropy in AlSi10Mg Alloy Sample Fabricated by Selective Laser Melting: Effect of Hatch Style, Scan Rotation and Use of Fresh and Recycled Powder, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Srivastava, Arpit Kumar; Basu, Sumit, Exploring the performance of a dielectric elastomer generator through numerical simulations, SENSORS AND ACTUATORS A-PHYSICAL, Vol.319, 2021.

Shukla, Digvijay; Panigrahi, Pradipta K., Interaction of vapor cloud and its effect on evaporation from microliter coaxial well, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.629, 2021.

Patel, Divyansh Singh; Sharma, Vyom; Jain, V. K.; Ramkumar, J., Sustainable Electrochemical Micromachining Using Atomized Electrolyte Flushing, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.168, 2021.

Das, Debayan; Panigrahi, P. K., Thermal analysis of loop mediated isothermal DNA amplification (LAMP) based point-of-care diagnostic device, APPLIED THERMAL ENGINEERING, Vol.183, 2021.

Kumar, Abhay; Saha, Arun K.; Panigrahi, Pradipta K.; Karn, Ashish, The mechanism of vortex bifurcation vis-a-vis axial switching in rectangular synthetic jets, EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, Vol.86, 2021.

Ghosh, Abhishek; Basu, Sumit, Soft dielectric elastomer tubes in an electric field, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.150, 2021.

Vallabh, Ajay; Ghoshdastidar, P. S., Numerical Simulation of Heat Transfer in Laminar Natural Convection of Mixed Newtonian-Non-Newtonian and Pure Non-Newtonian Nanofluids in a Square Enclosure, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.

Mimani, A.; Singh, R., Anthropogenic noise variation in Indian cities due to the COVID-19 lockdown during March-to-May 2020(a)), JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.150, 2021.

Orra, Kashfull; Choudhury, Sounak K., Experimental investigation of machining process by micro-textured cutting insert together with magneto-rheological damper, WEAR, Vol.476, 2021.

Jaiswal, Ankush Kumar; Khandekar, Sameer, Drop-on-Drop Impact Dynamics on a Superhydrophobic Surface, LANGMUIR, Vol.37, 2021.

Sharma, Vyom; Patel, Divyansh Singh; Agrawal, Vishal; Jain, V. K.; Ramkumar, J., Investigations into machining accuracy and quality in wire electrochemical micromachining under sinusoidal and triangular voltage pulse condition, JOURNAL OF MANUFACTURING PROCESSES, Vol.62, 2021.

Pandey, Shashank; Pradyumna, S.; Gupta, Shakti Singh, Static and dynamic analyses of functionally graded sandwich skew shell panels, JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol.23, 2021.

Gorthi, Srinivas R.; Mondal, Pranab K.; Biswas, Gautam; Sahu, Kirti C., Electro-capillary filling in a microchannel under the influence of magnetic and electric fields, CANADIAN JOURNAL OF CHEMICAL ENGINEERING, Vol.99, 2021.

Mathur, Girijesh; Tiwari, Nachiketa, Simulation and experimental investigation of a ballistic compression soft recovery system, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol.35, 2021.

Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 1-No Load and Highway Driving Emissions, and Acceleration Characteristics, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Paneerselvam, Purushothaman; Venkadesan, Gnanamoorthi; Panithasan, Mebin Samuel; Alaganathan, Gurusamy; Wierzbicki, Slawomir; Mikulski, Maciej, Evaluating the Influence of Cetane Improver Additives on the Outcomes of a Diesel Engine Characteristics Fueled with Peppermint Oil Diesel Blend, ENERGIES, Vol.14, 2021.

Singh, Akhilendra Pratap; Sharma, Nikhil; Kumar, Vikram; Agarwal, Avinash Kumar, Experimental investigations of mineral diesel/methanol-fueled reactivity controlled compression ignition engine operated at variable engine loads and premixed ratios, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.22, 2021.

Pandey, Pawan Kumar; Paul, Chandan; Das, Malay K.; Muralidhar, Krishnamurthy, Assessment and visualization of hemodynamic loading in aneurysm sac and neck: Effect of foam insertion, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol.235, 2021.

Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 4-Piston Rating, and Fuel Injection Equipment Issues, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3-Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Sharma, Basant Lal; Basak, Nirupam, Null Lagrangians in Cosserat Elasticity, JOURNAL OF ELASTICITY, Vol.143, 2021.

Jena, Ashutosh; Singh, Harsimran; Agarwal, Avinash Kumar, Effect of swirl ratio on charge convection, temperature stratification, and combustion in gasoline compression ignition engine, PHYSICS OF FLUIDS, Vol.33, 2021.

Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Effect of hydrogen enrichment of compressed natural gas on combustible limit and flame kernel evolution in a constant volume combustion chamber using laser ignition, FUEL, Vol.302, 2021.

Bhattacharya, Shashwat; Verma, Mahendra K.; Samtaney, Ravi, Prandtl number dependence of the small-scale properties in turbulent Rayleigh-Benard convection, PHYSICAL REVIEW FLUIDS, Vol.6, 2021.

Bhattacharya, Shashwat; Verma, Mahendra K.; Samtaney, Ravi, Revisiting Reynolds and Nusselt numbers in turbulent thermal convection, PHYSICS OF FLUIDS, Vol.33, 2021.

Sengupta, Tapan K.; Roy, Arkadyuti Ghosh; Chakraborty, Ardhendu; Sengupta, Aditi; Sundaram, Prasannabalaji, Thermal control of transonic shock-boundary layer interaction over a natural laminar flow airfoil, PHYSICS OF FLUIDS, Vol.33, 2021.

Tripathi, Varun; Chattopadhyaya, Somnath; Bhadauria, Alok; Sharma, Shubham; Li, Changhe; Pimenov, Danil Yurievich; Giasin, Khaled; Singh, Sunpreet; Gautam, Girish Dutt, An Agile System to Enhance Productivity through a Modified Value Stream Mapping Approach in Industry 4.0: A Novel Approach, SUSTAINABILITY, Vol.13, 2021.

Gupta, Jai Gopal; Agarwal, Avinash Kumar, Engine durability and lubricating oil tribology study of a biodiesel fuelled common rail direct injection medium-duty transportation diesel engine, WEAR, Vol.486, 2021.

Agarwal, Avinash Kumar; Agarwal, Deepak, Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 2-Lubricating Oil Condition Monitoring, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Sharma, Vyom; Patel, Divyansh Singh; Gyanprakash, Maurya; Ramkumar, J., On altering the wetting behaviour and corrosion resistance of a large metallic surface area by wire electrochemical texturing, SURFACE & COATINGS TECHNOLOGY, Vol.422, 2021.

Gupta, Saurabh; De, Santanu, Investigation of hydrodynamics and segregation characteristics in a dual fluidized bed using the binary mixture of sand and high-ash coal, ADVANCED POWDER TECHNOLOGY, Vol.32, 2021.

Kundu, Abhishek; Thangadurai, Murugan; Biswas, Gautam, Investigation on shear layer instabilities and generation of vortices during shock wave and boundary layer interaction, COMPUTERS & FLUIDS, Vol.224, 2021.

Gupta, Pulkit; Rajput, Harsh Singh; Law, Mohit, Vision-based modal analysis of cutting tools, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.32, 2021.

Gupta, Saurabh; Choudhary, Shikhar; Kumar, Suraj; De, Santanu, Large eddy simulation of biomass gasification in a bubbling fluidized bed based on the multiphase particle-in-cell method, RENEWABLE ENERGY, Vol.163, 2021.

Manoharan, Kapil; Anwar, Mohd Tahir; Bhattacharya, Shantanu, Development of hydrophobic paper substrates using silane and sol-gel based processes and deriving the best coating technique using machine learning strategies, SCIENTIFIC REPORTS, Vol.11, 2021.

Sundriyal, Poonam; Sahu, Megha; Prakash, Om; Bhattacharya, Shantanu, Long-term surface modification of PEEK polymer using plasma and PEG silane treatment, SURFACES AND INTERFACES, Vol.25, 2021.

Ghai, Viney; Chatterjee, Kingshuk; Agnihotri, Prabhat K., Vertically aligned carbon nanotubes-coated aluminium foil as flexible supercapacitor electrode for high power applications, CARBON LETTERS, Vol.31, 2021.

Kole, Madhusree; Khandekar, Sameer, Engineering applications of ferrofluids: A review, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.537, 2021.

Aggarwal, Akash; Patel, Sushil; Vinod, A. R.; Kumar, Arvind, An integrated Eulerian-Lagrangian-Eulerian investigation of coaxial gas-powder flow and intensified particle-melt interaction in directed energy deposition process, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.166, 2021.

Chaitanya, Gembali Sai; Sahu, Kirti Chandra; Biswas, Gautam, A study of two unequal-sized droplets undergoing oblique collision, PHYSICS OF FLUIDS, Vol.33, 2021.

Sampath, Santhakumar; Chaurasiya, Kanhaiya Lal; Aryan, Pouria; Bhattacharya, Bishakh, An innovative approach towards defect detection and localization in gas pipelines using integrated in-line inspection methods, JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, Vol.90, 2021.

Bhola, Akshay; Sharma, Teena; Verma, Nishchal K., DCNet: Dark Channel Network for single-image dehazing, MACHINE VISION AND APPLICATIONS, Vol.32, 2021.

Faheem, Mohammed; Khan, Aqib; Kumar, Rakesh; Khan, Sher Afghan; Asrar, Waqar; Sapardi, Mohd Azan Mohammed, Experimental investigation of the effect of cross wire on the flow field of elliptic jet, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol.90, 2021.

Khan, Sanan H.; Khan, Ateeb Ahmad; Husain, Afsar, Effect of fibre orientation on damage resistance of composite laminates, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, Vol.26, 2021.

Roy, A.; Gupta, K. K.; Naskar, S.; Mukhopadhyay, T.; Dey, S., Compound influence of topological defects and heteroatomic inclusions on the mechanical properties of SWCNTs, MATERIALS TODAY COMMUNICATIONS, Vol.26, 2021.

Usmani, Abdullah Y.; Muralidhar, K., Unsteady Hemodynamics in Intracranial Aneurysms With Varying Dome Orientations, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Mali, Rahul A.; Gupta, T. V. K.; Ramkumar, J., A comprehensive review of free-form surface milling- Advances over a decade, JOURNAL OF MANUFACTURING PROCESSES, Vol.62, 2021.

Sharma, Manoj Kumar; Bhattacharya, Jishnu, Deciding between concentrated and non-concentrated photovoltaic systems via direct comparison of experiment with opto-thermal computation, RENEWABLE ENERGY, Vol.178, 2021.

Singh, Manmeet; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Design methodology of a parabolic trough collector field for maximum annual energy yield, RENEWABLE ENERGY, Vol.177, 2021.

Chatterjee, Shilpi; Hens, Abhiram; Ghanta, Kartik Chandra; Biswas, Gautam, Molecular dynamics study of sessile ionic nanodroplet under external electric field, CHEMICAL ENGINEERING SCIENCE, Vol.229, 2021.

Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Magnetophoretic Control of Diamagnetic Particles Inside an Evaporating Droplet, LANGMUIR, Vol.37, 2021.

Roychowdhury, Ayan; Gupta, Anurag, On Structured Surfaces with Defects: Geometry, Strain Incompatibility, Stress Field, and Natural Shapes (vol 131, pg 239, 2018), JOURNAL OF ELASTICITY, Vol.147, 2021.

Pandey, Animesh; Singh, Manish; Gupta, Anurag, Positive disclination in a thin elastic sheet with boundary, PHYSICAL REVIEW E, Vol.104, 2021.

Khan, Basheer A.; Saha, Arun K., Direct numerical simulation of turbulent flow and heat transfer over a heated cube placed in a matrix of unheated cubes, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.171, 2021.

Borthakur, Manash Pratim; Nath, Binita; Biswas, Gautam, Dynamics of a compound droplet under the combined influence of electric field and shear flow, PHYSICAL REVIEW FLUIDS, Vol.6, 2021.

Jindal, Puneet; Kumar, Banoth Sravan; Bhattacharya, Jishnu, Coupled electrochemical-abuse-heat-transfer model to predict thermal runaway propagation and mitigation strategy for an EV battery module, JOURNAL OF ENERGY STORAGE, Vol.39, 2021.

Kumar, Alok; Zaloznik, Miha; Combeau, Herve; Lesoult, Gerard; Kumar, Arvind, Channel segregation during columnar solidification: Relation between mushy zone instability and mush permeability, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.164, 2021.

Pandey, Animesh; Gupta, Anurag, Conservation laws for defect fields in non-contractible domains, MECHANICS RESEARCH COMMUNICATIONS, Vol.118, 2021.

Pandey, Pawan Kumar; Das, Malay Kumar, Effect of foam insertion in aneurysm sac on flow structures in parent lumen: relating vortex structures with disturbed shear, PHYSICAL AND ENGINEERING SCIENCES IN MEDICINE, Vol.44, 2021.

Ghosh, Abhishek; Basu, Sumit, Soft dielectric elastomer tubes in an electric field, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.150, 2021.

Agarwal, Avinash Kumar; Mustafi, Nirendra Nath, Real-world automotive emissions: Monitoring methodologies, and control measures, RENEWABLE & SUSTAINABLE ENERGY REVIEWS, Vol.137, 2021.

Halder, Nirmal; Panigrahi, P. K., Cooling performance of vortex generator, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.235, 2021.

Pandey, Animesh; Gupta, Anurag, Point Singularities in Incompatible Elasticity, JOURNAL OF ELASTICITY, Vol.147, 2021.

Singh, Gaganpreet; Bhardwaj, Abhinav; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Perforated lightweight microwave metamaterial broadband absorber with discontinuous ground plane, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.127, 2021.

Orra, Kashfull; Choudhury, Sounak K., Stability analysis in machining process by using adaptive closed-loop feedback control system in turning process, JOURNAL OF VIBRATION AND CONTROL, Vol.27, 2021.

Sahu, G. N.; Jain, P.; Wahi, P.; Law, M., Emulating bistabilities in turning to devise gain tuning strategies to actively damp them using a hardware-in-the-loop simulator, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.32, 2021.

Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Kumar, Vikram, Particulate characteristics of low-temperature combustion (PCCI and RCCI) strategies in single cylinder research engine for developing sustainable and cleaner transportation solution, ENVIRONMENTAL POLLUTION, Vol.284, 2021.

Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Development and comparative experimental investigations of laser plasma and spark plasma ignited hydrogen enriched compressed natural gas fueled engine, ENERGY, Vol.216, 2021.

Singh, Akhilendra Pratap; Kumar, Vikram; Agarwal, Avinash Kumar, Evaluation of reactivity controlled compression ignition mode combustion engine using mineral diesel/gasoline fuel pair, FUEL, Vol.301, 2021.

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Performance and emission characteristics of conventional diesel combustion/partially premixed charge compression ignition combustion mode switching of biodiesel-fueled engine, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.22, 2021.

Chauhan, Pankaj Singh; Mishra, Aniket; Bhatt, Geeta; Bhattacharya, Shantanu, Enhanced He gas detection by V2O5-noble metal (Au, Ag, and Pd) nanocomposite with temperature dependent n- to p-type transition, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, Vol.123, 2021.

Punetha, Maneesh; Yadav, Mahesh Kumar; Jain, Samyak; Khandekar, Sameer; Sharma, Pavan K., Thermal-hydraulic test facility for nuclear reactor containment: Engineering design methodology and benchmarking, PROGRESS IN NUCLEAR ENERGY, Vol.138, 2021.

Singh, Gurveer; Kumar, Vishwa Deepak; Chandra, Laltu; Shekhar, R.; Ghoshdastidar, P. S., One-Dimensional Zonal Model for the Unsteady Heat Transfer Analysis in an Open Volumetric Air Receiver, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.13, 2021.

Bajpai, Shipra; Nisar, Ambreen; Sharma, Rupesh Kumar; Schwarz, Udo D.; Balani, Kantesh; Datye, Amit, Effect of fictive temperature on tribological properties of Zr44Ti11Cu10Ni10Be25 bulk metallic glasses, WEAR, Vol.486, 2021.

Fentahun, Daniel A.; Tyagi, Alekha; Singh, Sugandha; Sinha, Prerna; Mishra, Amodini; Danayak, Somnath; Kumar, Rajesh; Kar, Kamal K., Tunable optical and electrical properties of p-type Cu2O thin films, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, Vol.32, 2021.

Gupta, Saurabh; De, Santanu, Numerical investigation of cold flow hydrodynamics in an internally circulating dual fluidized bed for coal gasification, PARTICULATE SCIENCE AND TECHNOLOGY, Vol.39, 2021.

Singh, Surya Pratap; Aggarwal, Akash; Upadhyay, Ram Krishna; Kumar, Arvind, Processing of IN718-SS316L bimetallic-structure using laser powder bed fusion technique, MATERIALS AND MANUFACTURING PROCESSES, Vol.36, 2021.

Tahalyani, Jitendra; Akhtar, M. Jaleel; Kar, Kamal K., Heterolayered Composite of Carbon Nanofibers Sandwiched between Poly(ethylene terephthalate) and Polyurethane for Flexible Electromagnetic Shielding Application, ACS APPLIED NANO MATERIALS, Vol.4, 2021.

Ganvir, Ashish; Markocsan, Nicolaie; Balani, Kantesh; Nagar, Sainyam, Deposition of hydroxyapatite coatings by axial plasma spraying: Influence of feedstock characteristics on coating microstructure, phase content and mechanical properties, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, Vol.41, 2021.

Mukhopadhyay, T.; Naskar, S.; Chakraborty, S.; Karsh, P. K.; Choudhury, R.; Dey, S., Stochastic Oblique Impact on Composite Laminates: A Concise Review and Characterization of the Essence of Hybrid Machine Learning Algorithms, ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, Vol.28, 2021.

Kumar, Dhananjay; Valera, Hardikk; Gautam, Anirudh; Agarwal, Avinash Kumar, Simulations of methanol fueled locomotive engine using high pressure co-axial direct injection system, FUEL, Vol.295, 2021.

Basak, Nirupam; Sharma, Basant Lal, Null Lagrangians in linear theories of micropolar type and few other generalizations of elasticity, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.72, 2021.

Shirude, Ashutosh; Vyasarayani, C. P.; Chatterjee, Anindya, Towards design of a nonlinear vibration stabilizer for suppressing single-mode instability, NONLINEAR DYNAMICS, Vol.103, 2021.

Tyagi, Alekha; Penke, Yaswanth K.; Sinha, Prerna; Malik, Iram; Kar, Kamal K.; Ramkumar, Janakarajan; Yokoi, Hiroyuki, ORR performance evaluation of Al-substituted MnFe2O4/reduced graphene oxide nanocomposite, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.46, 2021.

Maurya, Anamika; Mishra, Lubhani; Chhabra, R. P., Forced convection from a sphere to power-law fluids in a tapered tube, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol.126, 2021.

Sharma, Meenaxi; Gupta, Shivam; Bhatt, Bidisha; Bhatt, Geeta; Bhattacharya, Shantanu; Khare, Krishnacharya, Anisotropic Motion of Aqueous Drops on Lubricated Chemically Heterogenous Slippery Surfaces, ADVANCED MATERIALS INTERFACES, Vol.8, 2021.

Tyagi, Alekha; Sinha, Prerna; Kar, Kamal K.; Yokoi, Hiroyuki, Acid-directed preparation of micro/mesoporous heteroatom doped defective graphitic carbon as bifunctional electroactive material: Evaluation of trace metal impurity, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol.604, 2021.

Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Enhanced electrical, mechanical, and viscoelastic properties of carbon-carbon composites using carbon nanotubes coated carbon textile as reinforcement, JOURNAL OF COMPOSITE MATERIALS, Vol.55, 2021.

Goel, Vikas; Hazarika, Naba; Kumar, Mayank; Singh, Vikram; Thamban, Navaneeth M.; Tripathi, Sachchida Nand, Variations in Black Carbon concentration and sources during COVID-19 lockdown in Delhi, CHEMOSPHERE, Vol.270, 2021.

Thakur, R. K.; Singh, K. K.; Ramkumar, Janakarajan, Impact of nanoclay filler reinforcement on CFRP composite performance during abrasive water jet machining, MATERIALS AND MANUFACTURING PROCESSES, Vol.36, 2021.

Gupta, K. K.; Mukhopadhyay, T.; Roy, A.; Roy, L.; Dey, S., Sparse machine learning assisted deep computational insights on the mechanical properties of graphene with intrinsic defects and doping, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.155, 2021.

Sundaram, Prasannabalaji; Sengupta, Tapan K.; Sengupta, Aditi; Suman, Vajjala K., Multiscale instabilities of Magnus-Robins effect for compressible flow past rotating cylinder, PHYSICS OF FLUIDS, Vol.33, 2021.

Rajput, Arun; Ramkumar, J.; Mondal, K., Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel, ULTRASONICS SONOCHEMISTRY, Vol.71, 2021.

Mukherji, Debashish; Singh, Manjesh Kumar, Tuning thermal transport in highly cross-linked polymers by bond-induced void engineering, PHYSICAL REVIEW MATERIALS, Vol.5, 2021.

Singh, Lavish K.; Bhadauria, Alok; Laha, Tapas, Understanding the effect of bimodal microstructure on the strength-ductility synergy of Al-CNT nanocomposites, JOURNAL OF MATERIALS SCIENCE, Vol.56, 2021.

Roy, Tania; Agarwal, Avinash Kumar; Sharma, Yogesh Chandra, A cleaner route of biodiesel production from waste frying oil using novel potassium tin oxide catalyst: A smart liquid-waste management, WASTE MANAGEMENT, Vol.135, 2021.

Kumar, Prabhat; Sauer, Roger A.; Saxena, Anupam, On topology optimization of large deformation contact-aided shape morphing compliant mechanisms, MECHANISM AND MACHINE THEORY, Vol.156, 2021.

Selvaraj, Jagan; Mukhopadhyay, Supratik; Kawashita, Luiz F.; Hallett, Stephen R., Modelling delaminations using adaptive cohesive segments with rotations in dynamic explicit analysis, ENGINEERING FRACTURE MECHANICS, Vol.245, 2021.

Rai, Amit K.; Gupta, Shakti S., Nonlinear vibrations of a polar-orthotropic thin circular plate subjected to circularly moving point load, COMPOSITE STRUCTURES, Vol.256, 2021.

Ghosh, Avik; Bhattacharya, Jishnu, A solar regenerated liquid desiccant evaporative cooling system for office building application in hot and humid climate, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.22, 2021.

Sonkul, Nikhil A.; Dhage, Gaurav S.; Vyas, Nalinaksh S., Single and Multi-label Fault Classification in rotors from unprocessed multi-sensor data through deep and parallel CNN architectures, EXPERT SYSTEMS WITH APPLICATIONS, Vol.185, 2021.

Srivastava, Rupal; Bhattacharya, Bishakh, Thermoelastic and vibration response analysis of shape memory alloy reinforced active bimorph composites, SMART MATERIALS AND STRUCTURES, Vol.30, 2021.

Bari, Pritam; Kilic, Zekai Murat; Law, Mohit; Wahi, Pankaj, Rapid stability analysis of serrated end mills using graphical-frequency domain methods, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.171, 2021.

Penke, Yaswanth K.; Yadav, Amit K.; Malik, Iram; Tyagi, Alekha; Ramkumar, Janakarajan; Kar, Kamal K., Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO, CHEMOSPHERE, Vol.267, 2021.

Muhammad; Lim, C. W.; Vyas, N. S., A Novel Application of Multi-Resonant Dissipative Elastic Metahousing for Bearings, ACTA MECHANICA SOLIDA SINICA, Vol.34, 2021.

Patel, Sushil; Reddy, Pradeep; Kumar, Arvind, A methodology to integrate melt pool convection with rapid solidification and undercooling kinetics in laser spot welding, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.164, 2021.

Srinivasan, Vyas; Rahatgonakar, Asmita M.; Khandekar, Sameer, Hydrodynamics of a completely wetting isolated liquid plug oscillating inside a square capillary tube, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, Vol.135, 2021.

Surthi, Kiran Kumar; Tyagi, Alekha; Kar, Kamal K.; Janakarajan, Ramkumar, First principle study on lithium-ion diffusion, electronic and electrochemical properties of cobalt doped lithium metal borates, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.148, 2021.

Sharma, Basant Lal; Saxena, Prashant, Variational principles of nonlinear magnetoelastostatics and their correspondences, MATHEMATICS AND MECHANICS OF SOLIDS, Vol.26, 2021.

Baishya, Nayan Jyoti; Bhattacharya, Bishakh; Ogai, Harutoshi; Tatsumi, Kohei, Design of an Anti-Slip Mechanism for Wheels of Step Climbing Robots, ACTUATORS, Vol.10, 2021.

Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Avinash Kumar, Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.143, 2021.

Singh, Preeti; Khanna, Sourav; Mudgal, Vijay; Newar, Sanjeev; Sharma, Vashi; Sundaram, Senthilarasu; Reddy, K. S.; Mallick, Tapas K.; Becerra, Victor; Hutchinson, David; Radulovic, Jovana; Khusainov, Rinat, Three dimensional analysis of dye-sensitized, perovskite and monocrystalline silicon solar photovoltaic cells under non uniform solar flux, APPLIED THERMAL ENGINEERING, Vol.182, 2021.

Sengupta, Aditi; Samuel, Roshan J.; Sundaram, Prasannabalaji; Sengupta, Tapan K., Role of non-zero bulk viscosity in three-dimensional Rayleigh-Taylor instability: Beyond Stokes' hypothesis, COMPUTERS & FLUIDS, Vol.225, 2021.

Bhat, Mohd Nadeem; Mushtaq, Shuhaib; Mohbe, Manoj, Impact of section thickness on cooling curve morphology, structure and properties of spheroidal graphite cast iron, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.46, 2021.

Vaishali; Mukhopadhyay, T.; Kumar, R. R.; Dey, S., Probing the multi-physical probabilistic dynamics of a novel functional class of hybrid composite shells, COMPOSITE STRUCTURES, Vol.262, 2021.

Das, Debayan; Namboodiri, S., Selection of a suitable paper membrane for Loop Mediated Isothermal DNA amplification reaction (LAMP) in a point-of-care diagnostic kit-Experimental and CFD analysis, CHEMICAL ENGINEERING SCIENCE, Vol.229, 2021.

Prasad, Niraj Kr; Shome, Rajib; Biswas, Gautam; Ghosh, Siddhartha Sankar; Dalal, Amaresh, Discerning the self-healing, shear-thinning characteristics and therapeutic efficacy of hydrogel drug carriers migrating through constricted microchannel resembling blood microcapillary, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.626, 2021.

Jain, Saransh; Cherian, Riya; Nataraja, Nuggehalli P.; Narne, Vijaya Kumar, The Relationship Between Tinnitus Pitch, Audiogram Edge Frequency, and Auditory Stream Segregation Abilities in Individuals With Tinnitus, AMERICAN JOURNAL OF AUDIOLOGY, Vol.30, 2021.

Rajput, Arun; Ramkumar, J.; Mondal, K., Cavitation behavior of various microstructures made from a C-Mn eutectoid steel, WEAR, Vol.486, 2021.

Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Buoyancy effects in vertical 2-D and 3-D T-channels on the onset of flow reversal of power-law fluids in the side branch, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.174, 2021.

Prasad, Rajesh Kumar; Agarwal, Avinash Kumar, Experimental evaluation of laser ignited hydrogen enriched compressed natural gas fueled supercharged engine, FUEL, Vol.289, 2021.

Sharma, Nikhil; Agarwal, Avinash Kumar, Macroscopic spray characteristics of a gasohol fueled GDI injector and impact on engine combustion and particulate morphology, FUEL, Vol.295, 2021.

Sharma, Eshan; De, Santanu; Cleary, Matthew J., LES of a lifted methanol spray flame series using the sparse Lagrangian MMC approach *, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.38, 2021.

Pazhayapisharath, Indira Chenthamara; Sathyanarayana, Sanjana Singh; Narne, Vijaya Kumar, Influence of Alignment Strategies and Consonant Acoustic Features on Laterality Index in Dichotic Testing in Indian Languages, JOURNAL OF THE AMERICAN ACADEMY OF AUDIOLOGY, Vol.32, 2021.

Sharma, Naresh; Kumar, Govind; Garg, Vivek; Mote, Rakesh G.; Gupta, Shilpi, Reconstructive spectrometer using a photonic crystal cavity, OPTICS EXPRESS, Vol.29, 2021.

Dehadrai, Abhinav Ravindra; Sharma, Ishan; Gupta, Shakti S., Three-Dimensional Dynamics of Towed Underslung Systems Using Geometrically Exact Beam Theory, AIAA JOURNAL, Vol.59, 2021.

Tripathi, Pragya; Ramkumar, J.; Balani, K., Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements, JOURNAL OF MATERIALS SCIENCE, Vol.56, 2021.

Patil, Sunil R.; Mohammad, Hashem; Chawda, Vivek; Sinha, Niraj; Singh, Reman Kumar; Qi, Jianqing; Anantram, M. P., Quantum Transport in DNA Heterostructures: Implications for Nanoelectronics, ACS APPLIED NANO MATERIALS, Vol.4, 2021.

Gupta, Saurabh; De, Santanu, Investigation of cold flow hydrodynamics in a dual fluidized bed for gasification of high-ash coal, POWDER TECHNOLOGY, Vol.384, 2021.

Dwivedi, Ankur; Banerjee, Arnab; Adhikari, Sondipon; Bhattacharya, Bishakh, Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials, INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, Vol.17, 2021.

Pandiyan, Arunkumar; Uthayakumar, Aarthi; Lim, Chaesung; Ganesan, Vinothkumar; Yu, Wonjong; Das, Amit; Lee, Sanghoon; Tsampas, Mihalis N.; Omar, Shobit; Han, Jeong Woo; Moorthy, Suresh Babu Krishna; Cha, Suk-Won, Validation of defect association energy on modulating oxygen ionic conductivity in low temperature solid oxide fuel Cell (vol 480, 229106, 2020), JOURNAL OF POWER SOURCES, Vol.484, 2021.

Cedik, Jakub; Pexa, Martin; Holubek, Michal; Mrazek, Jaroslav; Valera, Hardikk; Agarwal, Avinash Kumar, Operational Parameters of a Diesel Engine Running on Diesel-Rapeseed Oil-Methanol-Iso-Butanol Blends, ENERGIES, Vol.14, 2021.

Muaz, Muhammed; Khan, Sanan H., Failure mechanics analysis of AISI 4340 steel using finite element modeling of the milling process, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol., 2021.

Sahu, Govind N.; Law, Mohit; Wahi, Pankaj, Adaptive control to actively damp bistabilities in highly interrupted turning processes using a hardware-in-the-loop simulator, JOURNAL OF VIBRATION AND CONTROL, Vol., 2021.

Panithasan, Mebin Samuel; Venkadesan, Gnanamoorthi, Evaluating the outcomes of a single-cylinder CRDI engine operated by lemon peel oil under the influence of DTBP, rice husk nano additive and water injection, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol., 2021.

Bharti, Omprakash S.; Saha, Arun K.; Das, Malay K., Investigation of the transition of natural convective flow of water in a differentially heated cubic enclosure, EXPERIMENTAL HEAT TRANSFER, Vol., 2021.

Sachan, Deepak; Sharma, Ishan; Muthukumar, T., Indentation of a periodically layered, elastic half-space by a rigid sphere, MATHEMATICS AND MECHANICS OF SOLIDS, Vol., 2021.

Sethi, Durjyodhan; Acharya, Uttam; Kumar, Sanjeev; Shekhar, Shashank; Roy, Barnik Saha, Effect of Reinforcement Particles on Friction Stir Welded Joints with Scarf Configuration: an Approach to Achieve High Strength Joints, SILICON, Vol., 2021.

Gouravaraju, Saipraneeth; Narayan, Jyotindra; Sauer, Roger A.; Gautam, Sachin Singh, A Bayesian regularization-backpropagation neural network model for peeling computations, JOURNAL OF ADHESION, Vol., 2021.

Singh, Akhilendra Pratap; Jena, Ashutosh; Agarwal, Avinash Kumar, Multiple fuel injection strategy for premixed charge compression ignition combustion engine using biodiesel blends, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol., 2021.

Saha, Shalini; Singh, Abhishek Kumar; Chaki, Mriganka Shekhar, Analysis of generated shear wave due to stress discontinuity in a monoclinic layered structure, WAVES IN RANDOM AND COMPLEX MEDIA, Vol., 2021.

Ravesh, Randeep; Ansari, Ayaj A.; Panigrahi, Pradipta K.; Das, Malay K., Effect of surfactant crowding on clathrate hydrate growth, JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, Vol., 2021.

Breda, Paola; Sharma, Eshan; De, Santanu; Cleary, Matthew J.; Pfitzner, Michael, Coupling the Multiple Mapping Conditioning Mixing Model with Reaction-diffusion Databases in LES of Methane/air Flames, COMBUSTION SCIENCE AND TECHNOLOGY, Vol., 2021.

Singh, Amanpreet; Banerjee, Arnab; Bhattacharya, Bishakh, Waves in elastically coupled sandwich beams: An analytical investigation, MECHANICS RESEARCH COMMUNICATIONS, Vol. 115, 2021.

Shah, Ram Krishna; Drave, Jai Kumar; Khandekar, Sameer, Thermal Transport in Laminar Convective Flow of Ferrofluids in the Presence of External Magnetic Field, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 143, 2021.

Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Forced Convective Flow of Bingham Plastic Fluids in a Branching Channel With the Effect of T-Channel Branching Angle, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 143, 2021.

Faheem, Mohammed; Khan, Aqib; Kumar, Rakesh; Khan, Sher Afghan; Asrar, Waqar; Sapardi, Azan M., Experimental study on the mean flow characteristics of a supersonic multiple jet configuration, AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 108, 2021.

Tiwari, Sankalp; Vyasarayani, C. P.; Chatterjee, Anindya, Data suggest COVID-19 affected numbers greatly exceeded detected numbers, in four European countries, as per a delayed SEIQR model, SCIENTIFIC REPORTS, Vol. 11, 2021.

Gatapova, Elizaveta Ya; Sahu, Gopinath; Khandekar, Sameer; Hu, Run, Thermal management of high-power LED module with single-phase liquid jet array, APPLIED THERMAL ENGINEERING, Vol. 184, 2021.

Prakash, K. B. V. Satya; Lovaraju, P.; Rathakrishnan, E., Effect of orifice spacing on twin circular parallel compressible jets, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, Vol.38, 2021.

Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Superior electrical, mechanical and viscoelastic properties of CNTscoated carbon textile reinforced phenolic composite forhigh-performancestructural applications, JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 138, 2021.

De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, A Rendezvous Strategy With R-2 Reachability for Kinematic Agents, IEEE TRANSACTIONS ON AUTOMATIC CONTROL, Vol.66, 2021.

Nandanwar, Anuj; Dhar, Narendra Kumar; Malyshev, Dmitry; Rybak, Larisa; Behera, Laxmidhar, Finite-Time Robust Admissible Consensus Control of Multirobot System Under Dynamic Events, IEEE SYSTEMS JOURNAL, Vol. 15, 2021.

De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Tracking Protocol for Network of Double-Integrator Systems With Heterogeneous Time Delays, IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, Vol. 17, 2021.

Ranjan, Rajesh; Unnikrishnan, S.; Robinet, J. -C.; Gaitonde, Datta, Global transition dynamics of flow in a lid-driven cubical cavity, THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, Vol. 35, 2021.

Tripathi, Pragya; Ramkumar, Janakarajan; Balani, Kantesh, Synergistic addition of yttria-stabilized zirconia and h-BN/graphene/ diamond restricts multi-scale length wear of Cr-based hybrid coatings, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, Vol. 99, 2021.

Bangari, Raghubeer S.; Yadav, Anshul; Sinha, Niraj, Experimental and theoretical investigations of methyl orange adsorption using boron nitride nanosheets, SOFT MATTER, Vol. 17, 2021.

Liu, Zhaowei; McBride, Andrew; Sharma, Basant Lal; Steinmann, Paul; Saxena, Prashant, Coupled electro-elastic deformation and instabilities of a toroidal membrane, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 151, 2021.

Nanda, Soumya Ranjan; Kulkarni, Vinayak; Sahoo, Niranjan; Menezes, Viren, Sensitivity studies of ANFIS based force recovery technique towards prediction of aerodynamic load, FLOW MEASUREMENT AND INSTRUMENTATION, Vol. 80, 2021.

Mukherjee, Mousumi; Gupta, Anurag; Prashant, Amit, A rate-dependent model for sand to predict constitutive response and instability onset, ACTA GEOTECHNICA, Vol. 16, 2021.

Maddipati, Raj; Sengupta, Tapan K.; Sundaram, Prasannabalaji, Relevance of two- and three-dimensional disturbance field explained with linear stability analysis of Orr-Sommerfeld equation by compound matrix method, COMPUTERS & FLUIDS, Vol. 225, 2021.

Fentahun, Daniel A.; Tyagi, Alekha; Kar, Kamal K., Numerically investigating the AZO/Cu2O heterojunction solar cell using ZnO/CdS buffer layer, OPTIK, Vol. 228, 2021.

Nayak, Chinmayee; Ariharan, S.; Kundu, Biswanath; Singh, Sneha; Sivakumar, Sri; Balla, Vamsi Krishna; Balani, Kantesh, Radiation-induced effects on micro-scratch of ultra high molecular weight polyethylene biocomposites, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, Vol. 11, 2021.

Gouravaraju, Saipraneeth; Sauer, Roger A.; Gautam, Sachin Singh, On the presence of a critical detachment angle in gecko spatula peeling-a numerical investigation using an adhesive friction model, JOURNAL OF ADHESION, Vol. 97, 2021.

Tiwari, Sankalp; Vyasarayani, C. P.; Chatterjee, Anindya, Performance limit for base-excited energy harvesting, and comparison with experiments, NONLINEAR DYNAMICS, Vol. 103, 2021.

Sarkar, Shib Sankar; Das, Ankit; Paul, Siddhartha; Mali, Kalyani; Ghosh, Aniruddha; Sarkar, Ram; Kumar, Arvind, Machine learning method to predict and analyse transient temperature in submerged arc welding, MEASUREMENT, Vol. 170, 2021.

Raj, Rishi; Kulkarni, Avinash; Lebrun, Jean-Marie; Jha, Shikhar, Flash sintering: A new frontier in defect physics and materials science, MRS BULLETIN, Vol. 46, 2021.

Kumar, Rajesh; Sahoo, Sumanta; Tan, Wai Kian; Kawamura, Go; Matsuda, Atsunori; Kar, Kamal K., Microwave-assisted thin reduced graphene oxide-cobalt oxide nanoparticles as hybrids for electrode materials in supercapacitor, JOURNAL OF ENERGY STORAGE, Vol. 40, 2021.

Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Shape depended electrochemical properties of LiNi0.5Co0.5PO4/C composites for high voltage secondary, flexible Li-ion batteries, CHEMICAL ENGINEERING JOURNAL, Vol. 418, 2021.

Kumar, V. R. Sanal; Saravanan, Vignesh; Srinivasan, Vivek; Shankar, S. Ganesh; Mani, Sivabalan; Sankar, Vigneshwaran; Krishnamoorthy, Dhanalakshmi; Natarajan, Deepak; Rafic, Sulthan Ariff Rahman Mohamed; Baskaran, Roshan Vignesh; Chandrasekaran, Nichith; Natarajan, Vishnu; Sukumaran, Ajith; Doddi, Hema Sai Nagaraju; Padmanabhan, Sathyan; Balasubramaniam, Gowtham; Saravanan, A.; Kumar, N. Santhosh; Lenin, C.; Khan, A. Mohamed Imran; Saravanan, M.; Balakrishnan, R.; Balachandru, R.; Murugesan, Mohanraj; Venkatesan, Dharni Vasudhevan; Shanjay, K. E.; Kumar, H. Sujith; Abhilash, N. A.; Ram, D. Aswin; Janardhanan, Vignesh; Krishnaraj, K.; Gunasekaran, Sandeep; Karunakaran, Sabarinath; Vineeshwar, S.; Mariappan, Amrith; Kiridharan, R.; Sabarinathan, R.; Kumar, M. Ajith; Pradeep, Rahul; Thianesh, U. K.; Perumal, M. Rajaram; Eswar, K. S. Sumanth; Rajesh, M., The theoretical prediction of the boundary-layer-blockage and external flow choking at moving aircraft in ground effects, PHYSICS OF FLUIDS, Vol. 33, 2021.

Priyadarshini, Sindhuja; Das, Malay K.; De, Ashoke; Sinha, Rupesh, Numerical Investigation of Coaxial GCH(4)/LOx Combustion at Supercritical Pressures, COMBUSTION SCIENCE AND TECHNOLOGY, Vol. 193, 2021.

Sharma, Debojit; Mahapatra, Subhankar; Garnayak, Subrat; Arghode, Vaibhav K.; Bandopadhyay, Aditya; Dash, S. K.; Reddy, V. Mahendra, Development of the Reduced Chemical Kinetic Mechanism for Combustion of H-2/CO/C-1-C-4 Hydrocarbons, ENERGY & FUELS, Vol. 35, 2021.

Pandey, Manish; Regis, Rommel G.; Datta, Rituparna; Bhattacharya, Bishakh, Surrogate-assisted multi-objective optimization of the dynamic response of a freight wagon fitted with three-piece bogies, INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, Vol. 9, 2021.

Mishra, Gaurav; Tripathi, S. N.; Saud, T.; Joshi, Manish; Khan, Arshad; Sapra, B. K., Interaction of cesium bound fission product compounds (CsI and CsOH) with abundant inorganic compounds of atmosphere: Effect on hygroscopic growth properties, JOURNAL OF HAZARDOUS MATERIALS, Vol. 418, 2021.

Singh, Gaganpreet; Sharma, Bhawandeep; Bhardwaj, Abhinav; Srivastava, Kumar Vaibhav; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha, Wrapping of Curved Surfaces With Conformal Broadband Metamaterial Microwave Absorber, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol. 20, 2021.

Mishra, Gaurav; Ghosh, Kunal; Dwivedi, Anubhav Kumar; Kumar, Manish; Kumar, Sidyant; Chintalapati, Sudheer; Tripathi, S. N., An application of probability density function for the analysis of PM2.5 concentration during the COVID-19 lockdown period, SCIENCE OF THE TOTAL ENVIRONMENT, Vol. 782, 2021.

Gautam, Alok Sagar; Tripathi, S. N.; Joshi, Abhishek; Mandariya, Anil Kumar; Singh, Karan; Mishra, Gaurav; Kumar, Sanjeev; Ramola, R. C., First surface measurement of variation of Cloud Condensation Nuclei (CCN) concentration over the Pristine Himalayan region of Garhwal, Uttarakhand, India, ATMOSPHERIC ENVIRONMENT, Vol. 246, 2021.

Singh, Indrajeet; George, Suchi Mercy; Tiwari, Ashutosh; Ramkumar, J.; Balani, Kantesh, Influence of laser surface texturing on the wettability and antibacterial properties of metallic, ceramic, and polymeric surfaces, JOURNAL OF MATERIALS RESEARCH, Vol. 36, 2021.

Acharya, Uttam; Yadava, Manasij Kumar; Banik, Abhijit; Saha, Subhash Chandra; Saha Roy, Barnik, Effect of Heat Input on Microstructure and Mechanical Properties of Friction Stir Welded AA6092/17.5 SiCp-T6, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 30, 2021.

Gaurav, Kumar; Banik, Deepayan; Sharma, Ishan; Dutt, Pravir, Granular flow on a rotating and gravitating elliptical body, JOURNAL OF FLUID MECHANICS, Vol. 916, 2021.

Mudgal, Vijay; Singh, Preeti; Khanna, Sourav; Pandey, Chandan; Becerra, Victor; Mallick, Tapas K.; Reddy, K. S., Optimization of a novel Hybrid Wind Bio Battery Solar Photovoltaic System Integrated with Phase Change Material, ENERGIES, Vol. 14, 2021.

Chen, Chaojian; Singh, Manjesh Kumar; Wunderlich, Katrin; Harvey, Sean; Whitfield, Colette J.; Zhou, Zhixuan; Wagner, Manfred; Landfester, Katharina; Lieberwirth, Ingo; Fytas, George; Kremer, Kurt; Mukherji, Debashish; Ng, David Y. W.; Weil, Tanja, Polymer cyclization for the emergence of hierarchical nanostructures, NATURE COMMUNICATIONS, Vol. 12, 2021.

Zou, Z.; Hughes, T. J. R.; Scott, M. A.; Sauer, R. A.; Savitha, E. J., Galerkin formulations of isogeometric shell analysis: Alleviating locking with Greville quadratures and higher-order elements, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 380, 2021.

Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Tan, Wai Kian; Kar, Kamal K.; Matsuda, Atsunori, Recent progress on carbon-based composite materials for microwave electromagnetic interference shielding, CARBON, Vol. 177, 2021.

Mukhopadhyay, T.; Naskar, S.; Gupta, K. K.; Kumar, R.; Dey, S.; Adhikari, S., Probing the Stochastic Dynamics of Coronaviruses: Machine Learning Assisted Deep Computational Insights with Exploitable Dimensions, ADVANCED THEORY AND SIMULATIONS, Vol. 4, 2021.

Manchanda, Chirag; Kumar, Mayank; Singh, Vikram; Faisal, Mohd; Hazarika, Naba; Shukla, Ashutosh; Lalchandani, Vipul; Goel, Vikas; Thamban, Navaneeth; Ganguly, Dilip; Tripathi, Sachchida Nand, Variation in chemical composition and sources of PM2.5 during the COVID-19 lockdown in Delhi, ENVIRONMENT INTERNATIONAL, Vol. 153, 2021.

Devi, Nitika; Sahoo, Sumanta; Kumar, Rajesh; Singh, Rajesh Kumar, A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications, NANOSCALE, Vol. 13, 2021.

Selvaraj, Jagan; Mukhopadhyay, Supratik; Kawashita, Luiz F.; Hallett, Stephen R., Modelling delaminations using adaptive cohesive segments with rotations in dynamic explicit analysis, ENGINEERING FRACTURE MECHANICS, Vol. 245, 2021.

Singh, A.; Mukhopadhyay, T.; Adhikari, S.; Bhattacharya, B., Voltage-dependent modulation of elastic moduli in lattice metamaterials: Emergence of a programmable state-transition capability, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 208, 2021.

Maurya, Anamika; Tiwari, Naveen; Chhabra, R. P., Controlling the flow and heat transfer characteristics of power-law fluids in T-junctions using a rotating cylinder, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 163, 2021.

Gupta, Akanksha; Guha, Anirban, Modified Stokes drift due to resonant interactions between surface waves and corrugated sea floor with and without a mean current, PHYSICAL REVIEW FLUIDS, Vol. 6, 2021.

Joshi, Brahmesh Vinayak; Vipin, B.; Ramkumar, Janakarajan; Amit, R. K., Impact of policy instruments on lead-acid battery recycling: A system dynamics approach, RESOURCES CONSERVATION AND RECYCLING, Vol. 169, 2021.

Nandal, Vickey; Hariharan, K.; Sarvesha, R.; Singh, Sudhanshu S.; Huang, E-Wen; Chang, Yao-Jen; Yeh, An-Chou; Neelakantan, Suresh; Jain, Jayant, Aging temperature role on precipitation hardening in a non-equiatomic AlCoCrFeNiTi high-entropy alloy, MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, 2021.

Sarvesha, R.; Bhagyaraj, J.; Bhagavath, S.; Karagadde, S.; Jain, J.; Singh, S. S., 2D and 3D characteristics of intermetallic particles and their role in fracture response of AZ91 magnesium alloy, MATERIALS CHARACTERIZATION, Vol. 171, 2021.

Choi, Myung-Jin; Sauer, Roger A.; Klinkel, Sven, An isogeometric finite element formulation for geometrically exact Timoshenko beams with extensible directors, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 385, 2021.

Shukla, Ashutosh K.; Lalchandani, Vipul; Bhattu, Deepika; Dave, Jay S.; Rai, Pragati; Thamban, Navaneeth M.; Mishra, Suneeti; Gaddamidi, Sreenivas; Tripathi, Nidhi; Vats, Pawan; Rastogi, Neeraj; Sahu, Lokesh; Ganguly, Dilip; Kumar, Mayank; Singh, Vikram; Gargava, Prashant; Tripathi, Sachchida N., Real-time quantification and source apportionment of fine particulate matter including organics and elements in Delhi during summertime, ATMOSPHERIC ENVIRONMENT, Vol. 261, 2021.

Mergel, Janine C.; Scheibert, Julien; Sauer, Roger A., Contact with coupled adhesion and friction: Computational framework, applications, and new insights, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 146, 2021.

Sharma, Bhawna; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Gupta, Vijai Kumar; Thakur, Vijay Kumar, Titania modified gum tragacanth based hydrogel nanocomposite for water remediation, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol. 9, 2021.

Chaudhary, Jyoti; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Thakur, Vijay Kumar, Hydrogel of gelatin in the presence of graphite for the adsorption of dye: Towards the concept for water purification, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol. 9, 2021.

Khobragade, Rohini; Saravanan, Govindachetty; Einaga, Hisahiro; Nagashima, Hideo; Shukla, Pravesh; Gupta, Tarun; Agarwal, Avinash Kumar; Labhasetwar, Nitin, Diesel fuel particulate emission control using low-cost catalytic materials, FUEL, Vol. 302, 2021.

Immel, Katharina; Nguyen, Vu-Hieu; Dubory, Arnaud; Flouzat-Lachaniette, Charles-Henri; Sauer, Roger A.; Haiat, Guillaume, Determinants of the primary stability of cementless acetabular cup implants: A 3D finite element study, COMPUTERS IN BIOLOGY AND MEDICINE, Vol. 135, 2021.

De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Bounded Consensus Tracking of Heterogeneous Multiagent Systems Under Digraphs With Diverse Communication and Input Delays, IEEE TRANSACTIONS ON CYBERNETICS, Vol. , 2021.

Chaurasiya, Kanhaiya Lal; Bhattacharya, Bishakh; Varma, A. K.; Rastogi, Sarthak, Dynamic modeling of a cabin pressure control system, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol.234, 2020.

Afzal, Arshad; Chung, Heeyoon; Muralidhar, Krishnamurthy; Cho, Hyung Hee, Neural-Network-Assisted Optimization of Rectangular Channels with Intersecting Ribs for Enhanced Thermal Performance, HEAT TRANSFER ENGINEERING, Vol.41, 2020.

Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Optimization of process parameters in nano-finishing of Co-Cr-Mo alloy knee joint, MATERIALS AND MANUFACTURING PROCESSES, Vol.35, 2020.

Singh, Manmeet; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Computational prediction of significant efficiency gain through multi-tank modular heat storage for solar thermal systems with variable-temperature input profile, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.18, 2020.

Pandey, Vinod; Deka, Hiranya; Biswas, Gautam; Dalal, Amaresh, Dynamics of Growth and Breakup of an Evaporating Pendant Drop, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Jain, Ajay Kumar; Sharma, Arun Kumar; Khandekar, Sameer; Bhattacharya, Bishakh, Shape Memory Alloy-Based Sensor for Two-Phase Flow Detection, IEEE SENSORS JOURNAL, Vol.20, 2020.

Sharma, Manoj Kumar; Bhattacharya, Jishnu, A novel stationary concentrator to enhance solar intensity with absorber-only single axis tracking, RENEWABLE ENERGY, Vol.154, 2020.

Ramu, Nalla; Ghoshdastidar, P. S., Computer Simulation of Mixed Convection of Alumina-Deionized Water Nanofluid Over Four In-Line Electronic Chips Embedded in One Wall of a Vertical Rectangular Channel, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.12, 2020.

Maurya, Gaurav; Sharma, Basant Lal, Wave scattering on lattice structures involving an array of cracks, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.476, 2020.

Kumar, Santosh; Singh, Kalyan K.; Ramkumar, Janakarajan, Comparative study of the influence of graphene nanoplatelets filler on the mechanical and tribological behavior of glass fabric-reinforced epoxy composites, POLYMER COMPOSITES, Vol.41, 2020.

Yadav, Rahul; Tripathi, Swapnil; Asati, Shailendra; Das, Malay K., A combined neural network and simulated annealing based inverse technique to optimize the heat source control parameters in heat treatment furnaces, INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, Vol.28, 2020.

Agarwal, Naman; Raj, Manish; Bhattacharya, Jishnu, Solar tower on an uneven terrain: methodology and case study, RENEWABLE ENERGY, Vol.161, 2020.

Sharma, Basant Lal; Maurya, Gaurav, Discrete scattering by a pair of parallel defects, PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.378, 2020.

Gupta, Archana; Panigrahi, P. K., Alternating current coaxial electrospray for micro-encapsulation, EXPERIMENTS IN FLUIDS, Vol.61, 2020.

Chandran, Krishna; Muralidhar, Krishnamurthy, A switching ILU(0)-SGS preconditioner for matrix systems of incompressible flow and heat transfer using condition number estimates, PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, Vol.20, 2020.

Gorthi, Srinivas R.; Meher, Sanjaya Kumar; Biswas, Gautam; Mondal, Pranab Kumar, Capillary imbibition of non-Newtonian fluids in a microfluidic channel: analysis and experiments, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.476, 2020.

Sharma, Basant Lal, Discrete scattering by two staggered semi-infinite defects: reduction of matrix Wiener-Hopf problem, JOURNAL OF ENGINEERING MATHEMATICS, Vol.123, 2020.

Jindal, Puneet; Bhattacharya, Jishnu, Criticality of incorporating explicit in-situ measurement of temperature-dependent heat generation for accurate design of thermal management system for Li-ion battery pack, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol.44, 2020.

Sarkar, S., Flow structures and thermal field with modulated jet near the semi-circular leading edge, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.234, 2020.

Mandal, Saptarshi; Ghoshdastidar, P. S., Laminar Forced Convection of Nanofluids in a Circular Tube: A New Nonhomogeneous Flow Model, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Roychowdhury, Ayan; Gupta, Anurag, Growth and Non-Metricity in Foppl-von Karman Shells, JOURNAL OF ELASTICITY, Vol.140, 2020.

Srivastava, Arpit Kumar; Basu, Sumit, Mechanics of reversible wrinkling in a soft dielectric elastomer, PHYSICAL REVIEW E, Vol.101, 2020.

Upadhyay, Ram Krishna; Kumar, Arvind, Scratch and wear resistance of additive manufactured 316L stainless steel sample fabricated by laser powder bed fusion technique, WEAR, Vol.458, 2020.

Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Microscale Analysis of Melt Pool Dynamics Due To Particle Impingement and Laser-Matter Interaction in the Spot Laser Metal Deposition Process, JOM, Vol.72, 2020.

Santra, Somnath; Panigrahi, Devi Prasad; Das, Sayan; Chakraborty, Suman, Shape evolution of compound droplet in combined presence of electric field and extensional flow, PHYSICAL REVIEW FLUIDS, Vol.5, 2020.

Joshi, Tushar; Arora, Rajat; Basak, Anup; Gupta, Anurag, Equilibrium shape of misfitting precipitates with anisotropic elasticity and anisotropic interfacial energy, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.28, 2020.

Law, M.; Karthik, R.; Sharma, S.; Ramkumar, J., Finish turning of hardened bearing steel using textured PcBN tools, JOURNAL OF MANUFACTURING PROCESSES, Vol.60, 2020.

Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, A computational study of porosity formation mechanism, flow characteristics and solidification microstructure in the L-DED process, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.126, 2020.

Behera, Sachidananda; Saha, Arun K., Evolution of the flow structures in an elevated jet in crossflow, PHYSICS OF FLUIDS, Vol.32, 2020.

Singh, Digvijay; Kumar, Arvind, Numerical and experimental analysis of rapid solidification considering undercooling effect during water droplet impact on a substrate, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.20, 2020.

Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Coalescence of vertically aligned drops over a superhydrophobic surface, PHYSICS OF FLUIDS, Vol.32, 2020.

Kumar, A.; Saha, A. K.; Panigrahi, P. K.; Karn, A., Implications of Velocity Ratio on the Characteristics of a Circular Synthetic Jet Flush Mounted on a Torpedo Model in Quiescent and Cross-Flow Conditions, JOURNAL OF APPLIED FLUID MECHANICS, Vol.13, 2020.

Bari, Pritam; Law, Mohit; Wahi, Pankaj, Geometric models of non-standard serrated end mills, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.111, 2020.

Bhandari, Ajay; Bansal, Ankit; Sinha, Niraj, Effect of aging on heat transfer, fluid flow and drug transport in anterior human eye: A computational study, JOURNAL OF CONTROLLED RELEASE, Vol.328, 2020.

Singh, Akhilendra Pratap; Sharma, Nikhil; Kumar, Vikram; Satsangi, Dev Prakash; Agarwal, Avinash Kumar, Fuel Injection Strategy for Utilization of Mineral Diesel-Methanol Blend in a Common Rail Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Singh, Akhilendra Pratap; Kumar, Dhananjay; Agarwal, Avinash Kumar, Particulate characteristics of laser ignited hydrogen enriched compressed natural gas engine, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.45, 2020.

Chandran, Krishna; Dalal, Indranil Saha; Tatsumi, Kazuya; Muralidhar, Krishnamurthy, Numerical simulation of blood flow modeled as a fluid- particulate mixture, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, Vol.285, 2020.

Patel, Divyansh Singh; Sharma, Vyom; Jain, Vijay Kumar; Ramkumar, Janakarajan, Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.151, 2020.

Shirsath, Ganesh B.; Muralidhar, K.; Pala, Raj Ganesh S., Variable air gap membrane distillation for hybrid solar desalination, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.8, 2020.

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part I: Combustion, Performance, and Emission Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Kumar, Vikram; Pratap, Akhilendra; Agarwal, Avinash Kumar, Gaseous emissions (regulated and unregulated) and particulate characteristics of a medium-duty CRDI transportation diesel engine fueled with diesel-alcohol blends, FUEL, Vol.278, 2020.

Sharma, Nikhil; Agarwal, Avinash Kumar, Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, and Particulate Investigations of Gasohols Fuelled Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Rashmi A.; Agarwal, Avinash Kumar, Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Sharma, Nikhil; Agarwal, Avinash Kumar, Particulate Morphology Characterization of Butanol-Gasoline Blend Fueled Spark-Ignition Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Sharma, Vyom; Patel, Divyansh Singh; Jain, V. K.; Ramkumar, J., Wire electrochemical micromachining: An overview, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol.155, 2020.

Gowthaman, S.; Jagadeesha, T.; Neetu, Effect of severe plastic deformation through machining on the microstructure and corrosion behavior of end milled nimonic 263 alloy, MATERIALS LETTERS, Vol.275, 2020.

Gupta, Vivek; Adhikari, Sondipon; Bhattacharya, Bishakh, Exploring the dynamics of hourglass shaped lattice metastructures, SCIENTIFIC REPORTS, Vol.10, 2020.

Sharma, Arun Kumar; Datta, Rituparna; Agarwal, Shubham; Bhattacharya, Bishakh, Displacement transmissibility based system identification for polydimethylsiloxane integrating a combination of mechanical modelling with evolutionary multi-objective optimization, ENGINEERING OPTIMIZATION, Vol.52, 2020.

Dwivedi, Ankur; Banerjee, Arnab; Bhattacharya, Bishakh, Simultaneous energy harvesting and vibration attenuation in piezo-embedded negative stiffness metamaterial, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol.31, 2020.

Mukhopadhyay, Supratik; Hallett, Stephen R., An augmented cohesive element for coarse meshes in delamination analysis of composites, COMPOSITE STRUCTURES, Vol.254, 2020.

Aggarwal, Ishu; Paul, Saptarshi; Sinha, Nishant K.; Basu, Sumit, Molecular dynamics studies on the strength and ductility of symmetric thermally welded joints, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.28, 2020.

Bhaskar, Jitendra; Kumar Sharma, Arun; Bhattacharya, Bishakh; Adhikari, Sondipon, A review on shape memory alloy reinforced polymer composite materials and structures, SMART MATERIALS AND STRUCTURES, Vol.29, 2020.

Baghel, Vishakha; Sikarwar, Basant Singh; Muralidhar, K., Dropwise condensation from moist air over a hydrophobic metallic substrate, APPLIED THERMAL ENGINEERING, Vol.181, 2020.

Sundriyal, Poonam; Pandey, Mohit; Bhattacharya, Shantanu, Plasma-assisted surface alteration of industrial polymers for improved adhesive bonding, INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol.101, 2020.

Vardhaman, B. S. Ajay; Amarnath, M.; Ramkumar, J.; Mondal, K., Enhanced tribological performances of zinc oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil, MATERIALS CHEMISTRY AND PHYSICS, Vol.253, 2020.

Bhattacharjee, Arindam; Chatterjee, Anindya, Restitution modeling in vibration-dominated impacts using energy minimization under outward constraints, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.166, 2020.

Gupta, Pulkit; Law, Mohit; Mukhopadhyay, Suparno, Evaluating tool point dynamics using output-only modal analysis with mass-change methods, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.31, 2020.

Sarkar, Shib Sankar; Das, Ankit; Paul, Siddhartha; Ghosh, Aniruddha; Mali, Kalyani; Sarkar, Ram; Kumar, Arvind, Infrared imaging based machine vision system to determine transient shape of isotherms in submerged arc welding, INFRARED PHYSICS & TECHNOLOGY, Vol.109, 2020.

Tiwari, Sankalp; Chatterjee, Anindya, Basis functions for residual stresses, APPLIED MATHEMATICS AND COMPUTATION, Vol.386, 2020.

Bharti, Omprakash S.; Rajan, Devesh; Saha, Arun K.; Das, Malay K., Simultaneous Estimation of Pr and Ra in a Natural Convective Flow Using Inverse Technique, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Lokanathan, Manojkumar; Sharma, Himanshu; Shabaka, Mostafa; Mohanty, Kishore; Bahadur, Vaibhav, Comparing electrowettability and surfactants as tools for wettability enhancement on a hydrophobic surface, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.585, 2020.

Chakraborty, Samarshi; Panigrahi, Pradipta Kumar, Stability of nanofluid: A review, APPLIED THERMAL ENGINEERING, Vol.174, 2020.

Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Magnetic suppression of the coffee ring effect, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.513, 2020.

Sachan, Deepak; Sharma, Ishan; Muthukumar, T., Indentation of a Periodically Layered, Planar, Elastic Half-Space, JOURNAL OF ELASTICITY, Vol.141, 2020.

Das, Debayan; Panigrahi, P. K., CFD simulations for paper-based DNA amplification reaction (LAMP) of Mycobacterium tuberculosis-point-of-care diagnostic perspective, MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, Vol.58, 2020.

Keerthi, M. C.; Kushari, Abhijit, Spanwise Variations in Aerodynamic Damping of an Oscillating Annular Compressor Cascade, JOURNAL OF PROPULSION AND POWER, Vol.36, 2020.

Chintapalli, Naveenswamy; Sharma, Manoj Kumar; Bhattacharya, Jishnu, Linking spectral, thermal and weather effects to predict location-specific deviation from the rated power of a PV panel, SOLAR ENERGY, Vol.208, 2020.

Shukla, Digvijay; Panigarhi, Pradipta K., Digital holographic interferometry investigation of liquid hydrocarbon vapor cloud above a circular well, APPLIED OPTICS, Vol.59, 2020.

Sharma, Sumit; Setia, Prince; Chandra, Rakesh; Thakur, Nitin, Experimental and molecular dynamics study of boron nitride nanotube-reinforced polymethyl methacrylate composites, JOURNAL OF COMPOSITE MATERIALS, Vol.54, 2020.

Bangari, Raghubeer S.; Yadav, Vivek K.; Singh, Jayant K.; Sinha, Niraj, Fe3O4-Functionalized Boron Nitride Nanosheets as Novel Adsorbents for Removal of Arsenic(III) from Contaminated Water, ACS OMEGA, Vol.5, 2020.

Gupta, Prashant Kumar; Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Higher voltage, wider voltage plateau, longer cycle life, and faster kinetics via thermally modulated interfaces between Ramsdellite and Pyrolusite MnO2 for lithium-ion battery cathodes, JOURNAL OF POWER SOURCES, Vol.450, 2020.

Yadav, Deepak Kumar; Gupta, Amitava; Munshi, Prabhat, Design of NDI-SMC based robust hybrid nonlinear controller for load following operation in pressurized water reactor, NUCLEAR ENGINEERING AND DESIGN, Vol.363, 2020.

Lasrado, Dylan; Ahankari, Sandeep; Kar, Kamal, Nanocellulose-based polymer composites for energy applications-A review, JOURNAL OF APPLIED POLYMER SCIENCE, Vol.137, 2020.

Mishra, Bal Krishan; Panigrahi, P. K., Flow field induced by a dielectric barrier discharge plasma actuator analyzed with bi-orthogonal decomposition, PHYSICS OF FLUIDS, Vol.32, 2020.

Singh, Mahavir; Saxena, Prakhar; Ramkumar, J.; Rao, R., V, Multi-spark numerical simulation of the micro-EDM process: an extension of a single-spark numerical study, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.108, 2020.

Yadav, Om Prakash; Balaga, Sanjay Raghav; Vyas, Nalinaksh S., Forced vibrations of a spring-dashpot mechanism with dry friction and backlash, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.124, 2020.

Singh, Raghvendra Pratap; Shekhawat, Karanpal Singh; Das, Malay K.; Muralidhar, Krishnamurthy, Geological sequestration of CO2)in a water-bearing reservoir in hydrate-forming conditions, OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES, Vol.75, 2020.

Bangari, Raghubeer S.; Sinha, Niraj, Synthesis of High Surface Area Boron Nitride Nanosheets for the Removal of Methylene Blue and Rhodamine B Dyes from Contaminated Water, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Vol.20, 2020.

Kharbanda, Jagtej Singh; Yadav, Sateesh Kumar; Soni, Vikram; Kumar, Arvind, Modeling of heat transfer and fluid flow in epsom salt (MgSO4 center dot 7H2)O) dissociation for thermochemical energy storage, JOURNAL OF ENERGY STORAGE, Vol.31, 2020.

Vyas, Nalinaksh S., Professor J S Rao 27th Dec. 1939-4th July 2020) Obituary, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol.8, 2020.

Nath, Binita; Borthakur, Manash Pratim; Biswas, Gautam, Electric field induced dynamics of viscoplastic droplets in shear flow, PHYSICS OF FLUIDS, Vol.32, 2020.

Vaishali; Mukhopadhyay, T.; Karsh, P. K.; Basu, B.; Dey, S., Machine learning based stochastic dynamic analysis of functionally graded shells, COMPOSITE STRUCTURES, Vol.237, 2020.

Sreejith, V. S.; Tiwari, Nachiketa, Modelling of a hydroacoustic projector to produce low frequency sound, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.147, 2020.

Kalwar, Ankur; Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Utilization of primary alcohols in dual-fuel injection mode in a gasoline direct injection engine, FUEL, Vol.276, 2020.

Upadhyay, Ram Krishna; Mishra, Ashish Kumar; Kumar, Arvind, Mechanical Degradation of 3D Printed PLA in Simulated Marine Environment, SURFACES AND INTERFACES, Vol.21, 2020.

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part II: Particulate Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Aggarwal, Akash; Chouhan, Arvind; Patel, Sushil; Yadav, D. K.; Kumar, Arvind; Vinod, A. R.; Prashanth, K. G.; Gurao, N. P., Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: A particle-scale DEM - CFD - CA approach, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.158, 2020.

Patel, Divyansh Singh; Agrawal, Vishal; Ramkumar, J.; Jain, V. K.; Singh, Gaganpreet, Micro-texturing on free-form surfaces using flexible-electrode through-mask electrochemical micromachining, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.282, 2020.

Bhanawat, Abhinav; Yadav, Mahesh Kumar; Punetha, Maneesh; Khandekar, Sameer; Sharma, Pavan K., Effect of Surface Inclination on Filmwise Condensation Heat Transfer During Flow of Steam-Air Mixtures, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.12, 2020.

Banerjee, S.; Pattnayek, S.; Kumar, R.; Kar, K. K., Impact of Graphite on Thermomechanical, Mechanical, Thermal, Electrical Properties, and Thermal Conductivity of HDPE/Copper Composites, FUEL CELLS, Vol.20, 2020.

Nirala, Akhileshwar; Upadhyaya, Anish, Experimental Characterization and Sintering Behavior in Mixed Atmosphere (N-2 and H-2) of Fe3P-Added Ferritic Stainless Steel (434L), JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.29, 2020.

Penke, Yaswanth K.; Sinha, Prerna; Yadav, Amit K.; Ramkumar, Janakarajan; Kar, Kamal K., Al3+-doped 3d-transitional metal (Mn/Cu) ferrite impregnated rGO for PEC water-splitting/supercapacitor electrode with oxygen vacancies and surface intercalation aspects, COMPOSITES PART B-ENGINEERING, Vol.202, 2020.

Chouksey, Mayank; Keralavarma, Shyam M.; Basu, Sumit, Exploring subtle features of yield surfaces of porous, ductile solids through unit cell simulations, MECHANICS OF MATERIALS, Vol.151, 2020.

Bhandari, Ajay; Bansal, Ankit; Sinha, Niraj, Numerical modeling of therapeutic lens drug delivery in the anterior human eye for the treatment of primary open-angle glaucoma, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol.234, 2020.

Bhattacharya, Shantanu; Kumar, Sanjay; Singh, Sanjeet Kumar; Bhushan, Pulak; Sahu, Megha; Prakash, Om, Ashok chakra-structured meta-structure as a perfect sound absorber for broadband low-frequency sound, APPLIED PHYSICS LETTERS, Vol.117, 2020.

Pal, Anikesh; Chalamalla, Vamsi K., Evolution of plumes and turbulent dynamics in deep-ocean convection, JOURNAL OF FLUID MECHANICS, Vol.889, 2020.

Karmakar, Avijit; Saha, Arun K., Unsteady flow past a square cylinder placed close to a free surface, PHYSICS OF FLUIDS, Vol.32, 2020.

Law, Mohit; Gupta, Pulkit; Mukhopadhyay, Suparno, Modal analysis of machine tools using visual vibrometry and output-only methods, CIRP ANNALS-MANUFACTURING TECHNOLOGY, Vol.69, 2020.

Sahoo, Saikat; Saboo, Mahesh; Pratihar, Dilip Kumar; Mukhopadhyay, Sudipta, Real-Time Detection of Actual and Early Gait Events During Level-Ground and Ramp Walking, IEEE SENSORS JOURNAL, Vol.20, 2020.

Singh, Sandeep Kumar; Akhtar, Mohammad Jaleel; Kar, Kamal K., Synthesis of a Lightweight Nanocomposite Based on Polyaniline 3D Hollow Spheres Integrated Milled Carbon Fibers for Efficient X-Band Microwave Absorption, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, Vol.59, 2020.

Vyasarayani, C. P.; Chatterjee, Anindya, New approximations, and policy implications, from a delayed dynamic model of a fast pandemic, PHYSICA D-NONLINEAR PHENOMENA, Vol.414, 2020.

Joshi, Apurv; Sharma, Ishan; Krishnamurthy, Pradeep Kumar, Semi-analytical approach for calculation of intercore crosstalk in multicore fibers, OPTICAL FIBER TECHNOLOGY, Vol.60, 2020.

Pandey, Alok K.; Pal, Tanvi; Sharma, Raghunandan; Kar, Kamal K., Study of matrix-filler interaction through correlations between structural and viscoelastic properties of carbonous-filler/polymer-matrix composites, JOURNAL OF APPLIED POLYMER SCIENCE, Vol.137, 2020.

Verma, Mahendra K.; Alam, Shadab; Chatterjee, Soumyadeep, Turbulent drag reduction in magnetohydrodynamic and quasi-static magnetohydrodynamic turbulence, PHYSICS OF PLASMAS, Vol.27, 2020.

Bansal, Abhishek; Bhandari, Arihant; Chakraborty, Pritam; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Alloying with Ge and Hollowing Reduces Lithiation-Induced Stresses in Si Nanopillar Anodes, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.167, 2020.

Penke, Yaswanth K.; Yadav, Amit K.; Sinha, Prerna; Malik, Iram; Ramkumar, Janakarajan; Kar, Kamal K., Arsenic remediation onto redox and photo-catalytic/electrocatalytic Mn-Al-Fe impregnated rGO: Sustainable aspects of sludge as supercapacitor, CHEMICAL ENGINEERING JOURNAL, Vol.390, 2020.

Kumar, Pawan; Yadav, Anshul; Kumar, Arvind, ELECTRON BEAM PROCESSING OF SENSORS RELEVANT VACOFLUX-49 ALLOY: EXPERIMENTAL STUDIES OF THERMAL ZONES AND MICROSTRUCTURE, ARCHIVES OF METALLURGY AND MATERIALS, Vol.65, 2020.

Alam, Fahad; Shukla, Vishnu Raj; Varadarajan, K. M.; Kumar, S., Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, Vol.103, 2020.

Sharma, Asha; Basu, Sumit; Gupta, Nandini, Detection of charge around a nanoparticle in a nanocomposite using electrostatic force microscopy, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, Vol.27, 2020.

Sahu, G. N.; Vashisht, S.; Wahi, P.; Law, M., Validation of a hardware-in-the-loop simulator for investigating and actively damping regenerative chatter in orthogonal cutting, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.29, 2020.

Pal, Anikesh, Deep Learning Emulation of Subgrid-Scale Processes in Turbulent Shear Flows, GEOPHYSICAL RESEARCH LETTERS, Vol.47, 2020.

Singla, Shivam; Chatterjee, Anindya, Nonlinear responses of an SDOF structure with a light, whirling, driven, untuned pendulum, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.168, 2020.

Pandey, M.; Bhattacharya, B., Effect of bolster suspension parameters of three-piece freight bogie on the lateral frame force, INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, Vol.8, 2020.

Jacob, Beno J.; Misra, Santanu; Parameswaran, Venkitanarayanan; Mandal, Nibir, Control of planar fabrics on the development of tensile damage zones under high-speed deformation: An experimental study with granite and gneiss, JOURNAL OF STRUCTURAL GEOLOGY, Vol.140, 2020.

Saxena, Rajat; Agarwal, Naman; Rakshit, Dibakar; Kaushik, S. C., Suitability Assessment and Experimental Characterization of Phase Change Materials for Energy Conservation in Indian Buildings, JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Varshney, A.; Sangal, S.; Pramanick, A. K.; Mondal, K., On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol.793, 2020.

Chamoli, Pankaj; Srivastava, Tulika; Tyagi, Alekha; Raina, K. K.; Kar, Kamal K., Urea and cow urine-based green approach to fabricate graphene-based transparent conductive films with high conductivity and transparency, MATERIALS CHEMISTRY AND PHYSICS, Vol.242, 2020.

Shah, Ram Krishna; Khandekar, Sameer, Manipulation of Taylor bubble flow in a magneto-fluidic system, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.593, 2020.

Kumar, Rajesh; Shukla, Rajesh Kumar; Kumar, Alok; Kumar, Arvind, A computational study on air entrapment and its effect on convective heat transfer during droplet impact on a substrate, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.153, 2020.

Ahmad, Rasool; Paul, Saptarshi; Basu, Sumit, Characterization of entanglements in glassy polymeric ensembles using the Gaussian linking number, PHYSICAL REVIEW E, Vol.101, 2020.

Kumar, Rudra; Bhuvana, Thiruvelu; Sharma, Ashutosh, Ammonolysis synthesis of nickel molybdenum nitride nanostructures for high-performance asymmetric supercapacitors, NEW JOURNAL OF CHEMISTRY, Vol.44, 2020.

Pandey, Animesh; Gupta, Anurag, Topological Defects and Metric Anomalies as Sources of Incompatibility for Piecewise Smooth Strain Fields, JOURNAL OF ELASTICITY, Vol.139, 2020.

Tanwar, Ruchika; Kumari, Ritu; Mandal, Uttam K.; Kar, Kamal K., Catalytic activity of surface-functionalized nanoscale nickel zinc multiferrites: potential vector for water purification, JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, Vol.95, 2020.

Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Suppressing internal convection of a droplet using confinement during protein crystallization, JOURNAL OF APPLIED PHYSICS, Vol.128, 2020.

Mukhopadhyay, Tanmoy; Ma, Jiayao; Feng, Huijuan; Hou, Degao; Gattas, Joseph M.; Chen, Yan; You, Zhong, Programmable stiffness and shape modulation in origami materials: Emergence of a distant actuation feature, APPLIED MATERIALS TODAY, Vol.19, 2020.

Bhardwaj, Tarun; Shukla, Mukul; Prasad, Nisheeth K.; Paul, C. P.; Bindra, K. S., Direct Laser Deposition-Additive Manufacturing of Ti-15Mo Alloy: Effect of Build Orientation Induced Surface Topography on Corrosion and Bioactivity, METALS AND MATERIALS INTERNATIONAL, Vol.26, 2020.

Sharma, Basant Lal, Transmission of waves across atomic step discontinuities in discrete nanoribbon structures, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.71, 2020.

Tyagi, Alekha; Banerjee, Soma; Singh, Shashank; Kar, Kamal K., Biowaste derived activated carbon electrocatalyst for oxygen reduction reaction: Effect of chemical activation, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.45, 2020.

Chakraverty, A. P.; Dash, Sambhabana; Maharana, H. S.; Beura, S.; Mohanty, U. K., A novel investigation on durability of GRE composite pipe for prolonged sea water transportation, COMPOSITES COMMUNICATIONS, Vol.17, 2020.

Singh, Akhilendra Pratap; Sharma, Nikhil; Satsangi, Dev Prakash; Agarwal, Avinash Kumar, Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Biodiesel Spray Characteristics and Their Effect on Engine Combustion and Particulate Emissions, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.142, 2020.

Muaz, Muhammed; Choudhury, Sounak Kumar, A realistic 3D finite element model for simulating multiple rotations of modified milling inserts using coupled temperature-displacement analysis, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.107, 2020.

Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Adsorption Preference of HF over Ethylene Carbonate Leads to Dominant Presence of Fluoride Products in LiFePO4 Cathode- Electrolyte Interface in Li-Ion Batteries, JOURNAL OF PHYSICAL CHEMISTRY C, Vol.124, 2020.

Sing, Mahesh K.; Dutta, Ashish; Venkatesh, K. S., Multi-sensor data fusion for accurate surface modeling, SOFT COMPUTING, Vol.24, 2020.

Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Gupta, Tarun; Agarwal, Rashmi Avinash; Sharma, Nikhil; Pandey, Swaroop Kumar; Ateeq, Bushra, Toxicity of exhaust particulates and gaseous emissions from gasohol (ethanol blended gasoline)-fuelled spark ignition engines, ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS, Vol.22, 2020.

Anas, Mohammad; Joshi, Pranav; Verma, Mahendra K., Freely decaying turbulence in a finite domain at finite Reynolds number, PHYSICS OF FLUIDS, Vol.32, 2020.

Jangid, Hitesh; Jain, Subham; Teka, Beteley; Raja, Rekha; Dutta, Ashish, Kinematics-based end-effector path control of a mobile manipulator system on an uneven terrain using a two-stage Support Vector Machine, ROBOTICA, Vol.38, 2020.

Chaudhary, Kajal; Singh, Gaganpreet; Ramkumar, J.; Ramakrishna, S. Anantha; Srivastava, Kumar Vaibhav; Ramamurthy, Praveen C., Optically Transparent Protective Coating for ITO-Coated PET-Based Microwave Metamaterial Absorbers, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, Vol.10, 2020.

Malik, Iram; Srivastava, Tulika; Surthi, Kiran Kumar; Gayner, Chhatrasal; Kar, Kamal K., Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur, MATERIALS CHEMISTRY AND PHYSICS, Vol.255, 2020.

Paul, Karsten; Zimmermann, Christopher; Duong, Thang X.; Sauer, Roger A., Isogeometric continuity constraints for multi-patch shells governed by fourth-order deformation and phase field models, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol.370, 2020.

Sahu, Govind N.; Singh, Suyash; Singh, Aditya; Law, Mohit, Static and Dynamic Characterization and Control of a High-Performance Electro-Hydraulic Actuator, ACTUATORS, Vol.9, 2020.

Prasad, Rajesh Kumar; Mustafi, Nirendra; Agarwal, Avinash Kumar, Effect of spark timing on laser ignition and spark ignition modes in a hydrogen enriched compressed natural gas fuelled engine, FUEL, Vol.276, 2020.

Sinha, Prerna; Yadav, Amit; Tyagi, Alekha; Paik, Pradip; Yokoi, Hiroyuki; Naskar, Amit K.; Kuila, Tapas; Kar, Kamal K., Keratin-derived functional carbon with superior charge storage and transport for high-performance supercapacitors, CARBON, Vol.168, 2020.

Samanta, Debabrata; Kumar, Manish; Singh, Sugandha; Verma, Parul; Kar, Kamal K.; Maji, Tapas Kumar; Ghorai, Manas K., Triphenylamine and terpyridine-zinc(ii) complex based donor-acceptor soft hybrid as a visible light-driven hydrogen evolution photocatalyst, JOURNAL OF MATERIALS CHEMISTRY A, Vol.8, 2020.

Dubey, Shruti; Awasthi, Shikha; Nisar, Ambreen; Balani, Kantesh, Role of Interfaces in Damage Initiation and Tolerance of Carbon Nanotube-Reinforced HfB2-ZrB2 Ceramics, JOM, Vol. 72, 2020.

Bhushan, Braj; Basu, Sabnam; Panigrahi, Pradipta Kumar; Dutta, Sourav, Exploring the Thermal Signature of Guilt, Shame, and Remorse, FRONTIERS IN PSYCHOLOGY, Vol. 11, 2020.

Balamurugan, G.; Rodda, A.; Philip, J.; Mandal, A. C., Characteristics of the turbulent non-turbulent interface in a spatially evolving turbulent mixing layer, JOURNAL OF FLUID MECHANICS, Vol. 894, 2020.

Maharana, H. S.; Murty, S. V. S. Narayana; Ramkumar, J.; Mondal, K., Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 817, 2020.

De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Communication-Delay-Dependent Rendezvous With Possible Negative Controller Gain in Cyclic Pursuit, IEEE TRANSACTIONS ON CONTROL OF NETWORK SYSTEMS, Vol. 7, 2020.

Sharma, Nikhil; Bachalo, William D.; Agarwal, Avinash Kumar, Spray droplet size distribution and droplet velocity measurements in a firing optical engine, PHYSICS OF FLUIDS, Vol. 32, 2020.

Punetha, Maneesh; Yadav, Mahesh Kumar; Khandekar, Sameer; Sharma, Pavan K.; Ganju, Sunil, Intrinsic transport and combustion issues of steam-air-hydrogen mixtures in nuclear containments, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 452020.

Dixit, K.; Gupta, P.; Kamle, S.; Sinha, N., Structural analysis of porous bioactive glass scaffolds using micro-computed tomographic images, JOURNAL OF MATERIALS SCIENCE, Vol. 55, 2020.

Sharma, Asha; Basu, Sumit; Gupta, Nandini, Investigation of the interface in nanodielectrics using electrostatic force microscopy, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, Vol. 27, 2020.

Mokhalingam, Aningi; Ghaffari, Reza; Sauer, Roger A.; Gupta, Shakti S., Comparing quantum, molecular and continuum models for graphene at large deformations, CARBON, Vol. 159, 2020.

Sonkusare, Reshma; Jain, Roopam; Biswas, Krishanu; Parameswaran, Venkitanarayanan; Gurao, N. P., High strain rate compression behaviour of single phase CoCuFeMnNi high entropy alloy, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 823, , 2020.

Nagarajan, Srinivasan; Gurao, N. P.; Parameswaran, Venkitanarayanan, On the kinetics of texture development in Al-Mg alloy under high strain rate tension, MATERIALS CHARACTERIZATION, Vol. 163, 2020.

Pandey, M.; Bhattacharya, B., A Parametric Study Analysing the Effect of Bolster Suspension Parameters on the Carbody Dynamic Response in a Freight Wagon Fitted with Three-Piece Bogie, JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, Vol. 8, 2020.

Yadav, S.; Jinoop, A. N.; Sinha, N.; Paul, C. P.; Bindra, K. S., Parametric investigation and characterization of laser directed energy deposited copper-nickel graded layers, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 108, 2020.

Kirar, Pavan Kumar; Alvarenga, Kathryn; Kolhe, Pankaj; Biswas, Gautam; Sahu, Kirti Chandra, Coalescence of drops on the free-surface of a liquid pool at elevated temperatures, PHYSICS OF FLUIDS, Vol. 32, 2020.

Adhikari, Sondipon; Rastogi, Akshat; Bhattacharya, Bishakh, Piezoelectric vortex induced vibration energy harvesting in a random flow field, SMART MATERIALS AND STRUCTURES, Vol. 29, 2020.

Nisar, Ambreen; Bajpai, Shipra; Khan, Mohammad Mohsin; Balani, Kantesh, Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2-SiC composites, CERAMICS INTERNATIONAL, Vol. 46, 2020.

Sundriyal, Poonam; Bhattacharya, Shantanu, Textile-based supercapacitors for flexible and wearable electronic applications, SCIENTIFIC REPORTS, Vol. 10, 2020.

Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Shape controlled and structurally stabilized Co-doped olivine lithium phosphate cathodes for high voltage conventional, thin and flexible Li-ion batteries, CHEMICAL ENGINEERING JOURNAL, Vol. 399, 2020.

Mandariya, Anil Kumar; Tripathi, S. N.; Gupta, Tarun; Mishra, Gaurav, Wintertime hygroscopic growth factors (HGFs) of accumulation mode particles and their linkage to chemical composition in a heavily polluted urban atmosphere of Kanpur at the Centre of IGP, India: Impact of ambient relative humidity, SCIENCE OF THE TOTAL ENVIRONMENT, Vol. 704, 2020.

Saxena, Prashant; Sharma, Basant Lal, On equilibrium equations and their perturbations using three different variational formulations of nonlinear electroelastostatics, MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 25, 2020.

Kiniger, Giovanni; Sglavo, Vincenzo; Jha, Shikhar K.; Raj, Rishi, Flash-induced spreading of metals on zirconia, SCRIPTA MATERIALIA, Vol. 176, 2020.

Alam, Fahad; Kumar, Anil; Shukla, Vishnu Raj; Nisar, Ambreen; Balani, Kantesh, Multi-length scale wear damage mechanisms of ultra-high molecular weight polyethylene nanocomposites, POLYMER TESTING, Vol. 81, 2020.

Tripathi, Pragya; Katiyar, Prvan Kumar; Ramkumar, Janakarajan; Balani, Kantesh, Synergistic role of carbon nanotube and yttria stabilised zirconia reinforcement on wear and corrosion resistance of Cr-based nano-composite coatings, SURFACE & COATINGS TECHNOLOGY, Vol. 385, 2020.

Dwivedi, A. K.; Kumar, Manish; Mishra, Gaurav; Joshi, Manish; Khan, Arshad; Tiwari, Naveen; Kumar, Sidyant; Saud, T.; Sapra, B. K.; Tripathi, S. N., Optimization of controlling parameters of plasma torch aerosol generator and characteristics of synthesized metal oxide aerosols in context of NAF program, PROGRESS IN NUCLEAR ENERGY, Vol. 123, 2020.

Singh, Preeti; Mudgal, Vijay; Khanna, Sourav; Mallick, Tapas K.; Reddy, K. S., Experimental investigation of solar photovoltaic panel integrated with phase change material and multiple conductivity-enhancing-containers, ENERGY, Vol. 205, 2020.

Basu, Aviru Kumar; Basu, Adreeja; Bhattacharya, Shantanu, Micro/Nano fabricated cantilever based biosensor platform: A review and recent progress, ENZYME AND MICROBIAL TECHNOLOGY, Vol. 139, 2020.

Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh K.; Maegawa, Keiichiro; Tan, Wai Kian; Kawamura, Go; Kar, Kamal K.; Matsuda, Atsunori, Heteroatom doped graphene engineering for energy storage and conversion, MATERIALS TODAY, Vol. 39, 2020.

Sharma, Naresh; Kumar, Govind; Garg, Vivek; Mote, Rakesh G.; Ramarao, Vijaya; Gupta, Shilpi, Translationally Invariant Generation of Annular Beams Using Thin Films, IEEE PHOTONICS TECHNOLOGY LETTERS, Vol. 32, 2020.

Pandiyan, Arunkumar; Uthayakumar, Aarthi; Lim, Chaesung; Ganesan, Vinothkumar; Yu, Wonjong; Das, Amit; Lee, Sanghoon; Tsampas, Mihalis N.; Omar, Shobit; Han, Jeong Woo; Moorthy, Suresh Babu Krishna; Cha, Suk-Won, Validation of defect association energy on modulating oxygen ionic conductivity in low temperature solid oxide fuel cell, JOURNAL OF POWER SOURCES, Vol. 480, 2020.

Chowdhury, Anirban; Dutta, Ashish; Prasad, Girijesh, Corticomuscular Co-Activation Based Hybrid Brain-Computer Interface for Motor Recovery Monitoring, IEEE ACCESS, Vol. 8, 2020.

Sharma, Basant Lal; Mishuris, Gennady, Scattering on a square lattice from a crack with a damage zone, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol. 476, 2020.

Wang, Hairui; Zhao, Danyang; Jin, Yifei; Wang, Minjie; Mukhopadhyay, Tanmoy; You, Zhong, Modulation of multi-directional auxeticity in hybrid origami metamaterials, APPLIED MATERIALS TODAY, Vol. 20, 2020.

Yadav, Amit; Kar, Kamal K., One-dimensional lithium ion capacitor in core-shell wire shape construction for wearable applications, CHEMICAL ENGINEERING JOURNAL, Vol. 401, 2020.

Basu, Aviru Kumar; Sah, Amar Nath; Dubey, Mayank Manjul; Dwivedi, Prabhat K.; Pradhan, Asima; Bhattacharya, Shantanu, MWCNT and alpha-Fe2O3 embedded rGO-nanosheets based hybrid structure for room temperature chloroform detection using fast response/recovery cantilever based sensors, SENSORS AND ACTUATORS B-CHEMICAL, Vol. 305, 2020.

Kar, Kamal K.; Ray, Sudip; De Sarkar, Mousumi, Preface to the special issue in honor of Professor Anil K. Bhowmick on the occasion of his 65th birthday, JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 137, 2020.

Vyasarayani, C. P.; Chatterjee, Anindya, Complete dimensional collapse in the continuum limit of a delayed SEIQR network model with separable distributed infectivity, NONLINEAR DYNAMICS, Vol. 101, 2020.

Zhao, Yani; Singh, Manjesh K.; Kremer, Kurt; Cortes-Huerto, Robinson; Mukherji, Debashish, Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?, MACROMOLECULES, Vol. 53, 2020.

Kar, Subhajit; Guha, Anirban, An inverse technique for reconstructing ocean's density stratification from surface data, OCEAN MODELLING, Vol. 147, 2020.

Mishra, Rahul; Soti, Atul; Bhardwaj, Rajneesh; Kulkarni, Salil S.; Thompson, Mark C., Transverse vortex-induced vibration of a circular cylinder on a viscoelastic support at low Reynolds number, JOURNAL OF FLUIDS AND STRUCTURES, Vol. 95, 2020.

Gupta, Kritesh Kumar; Mukhopadhyay, Tanmoy; Roy, Aditya; Dey, Sudip, Probing the compound effect of spatially varying intrinsic defects and doping on mechanical properties of hybrid graphene monolayers, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, Vol. 50, 2020.

Patti, Biswaranjan; Taneja, Taaresh; Arghode, Vaibhav Kumar, Body force model for simulating airflow through dynamically oscillating louvers, SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT, Vol. 26, 2020.

Raj, Arindam; Dhandia, Neeraj; Balani, Kantesh, Adhesin Protein Interaction of Staphylococcus Aureus Bacteria with Various Biomaterial Surfaces, ACS BIOMATERIALS SCIENCE & ENGINEERING, Vol. 6, 2020.

Tayde, Yakeen; Chaudhary, Kajal; Singh, Gaganpreet; Dhumal, Ayushi; Saikia, Mondeep; Srivastava, Kumar V.; Ramkumar, Janakrajan; Ramakrishna, Subramaniam A., An optically transparent and flexible microwave absorber for X and Ku bands application, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, Vol. 62, 2020.

Mistri, Moumita; Joshi, Shrikant; Kar, Kamal K.; Balani, Kantesh, Tribomechanical insight into carbide-laden hybrid suspension-powder plasma-sprayed Tribaloy T400 composite coatings, SURFACE & COATINGS TECHNOLOGY, Vol. 396, 2020.

Teotia, Arun Kumar; Dienel, Kasper; Qayoom, Irfan; van Bochove, Bas; Gupta, Sneha; Partanen, Jouni; Seppala, Jukka; Kumar, Ashok, Improved Bone Regeneration in Rabbit Bone Defects Using 3D Printed Composite Scaffolds Functionalized with Osteoinductive Factors, ACS APPLIED MATERIALS & INTERFACES, Vol. 12, 2020.

Ansari, Nooruddin; Tran, Brian; Poole, Warren J.; Singh, Sudhanshu S.; Krishnaswamy, Hariharan; Jain, Jayant, High temperature deformation behavior of Mg-5wt.%Y binary alloy: Constitutive analysis and processing maps, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 777, 2020.

Awasthi, Shikha; Pandey, Sarvesh Kumar; Balani, Kantesh, Tuning the magnetism and tribological behaviour of electrodeposited Ni/Cu bi-layer by selective reinforcement of carbon nanotubes, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 818, 2020.

Kalita, Kanak; Mukhopadhyay, Tanmoy; Dey, Partha; Haldar, Salil, Genetic programming-assisted multi-scale optimization for multi-objective dynamic performance of laminated composites: the advantage of more elementary-level analyses, NEURAL COMPUTING & APPLICATIONS, Vol. 32, 2020.

Guha, Anirban; Heifetz, Eyal; Gupta, Akanksha, Pairs of surface wave packets with zero-sum energy in the Hawking radiation analog, PHYSICAL REVIEW D, Vol. 102, 2020.

Singh, Nawab; Ali, Azahar; Rai, Prabhakar; Ghori, Inayathullah; Sharma, Ashutosh; Malhotra, B. D.; John, Renu, Dual-modality microfluidic biosensor based on nanoengineered mesoporous graphene hydrogels, LAB ON A CHIP, Vol. 20, 2020.

Singh, Preeti; Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. Srinivas; Mallick, Tapas K.; Becerra, Victor; Radulovic, Jovana; Hutchinson, David; Khusainov, Rinat, Solar Photovoltaic Panels with Finned Phase Change Material Heat Sinks, ENERGIES, Vol. 13, 2020.

Banerjee, Sreerup; Pal, Anupam; Fox, Mark, Volume and position change of the stomach during gastric accommodation and emptying: A detailed three-dimensional morphological analysis based on MRI, NEUROGASTROENTEROLOGY AND MOTILITY, Vol. 32, 2020.

Tyagi, Alekha; Kar, Kamal K.; Yokoi, Hiroyuki, Atomically dispersed Ni/NixSy anchored on doped mesoporous networked carbon framework: Boosting the ORR performance in alkaline and acidic media, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol. 571, 2020.

Mishra, Gaurav; Tripathi, S. N.; Saud, T.; Joshi, Manish; Khan, Arshad; Sapra, B. K., Study on CCN activity of fission product aerosols (CsI and CsOH) and their effect on size and other properties, ATMOSPHERIC RESEARCH, Vol. 236, 2020.

Verma, Ankit; Thakur, Sourbh; Mamba, Gcina; Prateek; Gupta, Raju Kumar; Thakur, Pankaj; Thakur, Vijay Kumar, Graphite modified sodium alginate hydrogel composite for efficient removal of malachite green dye, INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, Vol. 148, 2020.

Rathaur, Vidisha Singh; Kumar, Satyendra; Panigrahi, Pradipta Kumar; Panda, Siddhartha, Investigating the Effect of Antibody-Antigen Reactions on the Internal Convection in a Sessile Droplet via Microparticle Image Velocimetry and DLVO Analysis, LANGMUIR, Vol. 36, 2020.

Bhuvaneshwari, B.; Vivekananthan, S.; Sathiyan, G.; Palani, G. S.; Iyer, Nagesh R.; Rai, Prabhat K.; Mondal, K.; Gupta, Raju Kumar, Doping engineering of V-TiO2 for its use as corrosion inhibitor, JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 816, 2020.

Nizam, Sarwar; Sen, Indra S.; Vinoj, Velu; Galy, Valier; Selby, David; Azam, Mohammad F.; Pandey, Satyendra K.; Creaser, Robert A.; Agarwal, Avinash K.; Singh, Akhilendra P.; Bizimis, Michael, Biomass-Derived Provenance Dominates Glacial Surface Organic Carbon in the Western Himalaya, ENVIRONMENTAL SCIENCE & TECHNOLOGY, Vol. 54, 2020.

Kajal, Sahil; Jain, V. K.; Ramkumar, J.; Nagdeve, Leeladhar, Experimental and theoretical investigations into internal magnetic abrasive finishing of a revolver barrel, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Gupta, Abhinav; Saha, Arun K., Suppression of vortex shedding in flow around a square cylinder using control cylinder, EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, Vol.76, 2019.

Kumar, Vikram; Sinha, Sujeet Kumar; Agarwal, Avinash Kumar, Wear Evaluation of Engine Piston Rings Coated With Dual Layer Hard and Soft Coatings, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol.141, 2019.

Ranmode, Vaibhav; Singh, Manmeet; Bhattacharya, Jishnu, Analytical formulation of effective heat transfer coefficient and extension of lumped capacitance method to simplify the analysis of packed bed storage systems, SOLAR ENERGY, Vol.183, 2019.

Chanda, Samarjeet; Balaji, C.; Venkateshan, S. P., Non-intrusive measurement of thermal contact conductance at polymer-metal two dimensional annular interface, HEAT AND MASS TRANSFER, Vol.55, 2019.

Kumar, Manoj; Gautam, Sachin S.; Dixit, Prakash M., A non-linear ductile damage growth law at elevated temperature, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.44, 2019.

Singh, Sachin; Kumar, Deepu; Sankar, M. Ravi; Jain, V. K., Viscoelastic medium modeling and surface roughness simulation of microholes finished by abrasive flow finishing process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Shukla, Rajesh Kumar; Kumar, Alok; Kumar, Rajesh; Singh, Digvijay; Kumar, Arvind, Numerical study of pore formation in thermal spray coating process by investigating dynamics of air entrapment, SURFACE & COATINGS TECHNOLOGY, Vol.378, 2019.

Soni, Vikram; Kumar, Arvind; Jain, V. K., Fast waste heat recovery in 100-150 degrees C using close-contact charging of nano-enhanced PCM composite, JOURNAL OF MOLECULAR LIQUIDS, Vol.285, 2019.

Kanchwala, Husain; Chatterjee, Anindya, Rationally Derived Three-Parameter Models for Elastomeric Suspension Bushings: Theory and Experiment, JOURNAL OF TESTING AND EVALUATION, Vol.47, 2019.

Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Sharma, Basant Lal, On electronic conductance of partially unzipped armchair nanotubes: further analysis, EUROPEAN PHYSICAL JOURNAL B, Vol.92, 2019.

Sharma, Vyom; Srivastava, Ishan; Jain, V. K.; Ramkumar, J., Modelling of Wire Electrochemical Micromachining (Wire-ECMM) process for anode shape prediction using finite element method, ELECTROCHIMICA ACTA, Vol.312, 2019.

Ramgadia, Abhishek G.; Saha, Arun K., Study of fully-developed turbulent flow and heat transfer in a rotating wavy-walled duct, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.144, 2019.

Bhandari, Arihant; Jindal, Puneet; Bhattacharya, Jishnu, Discovery of new ground state structures for Li4Mn2O5 and V2O5 from first principles, COMPUTATIONAL MATERIALS SCIENCE, Vol.159, 2019.

Qayoum, Adnan; Panigrahi, Pradipta, Experimental Investigation of Heat Transfer Enhancement in a Two-Pass Square Duct by Permeable Ribs, HEAT TRANSFER ENGINEERING, Vol.40, 2019.

Shah, Ram Krishna; Khandekar, Sameer, Exploring ferrofluids for heat transfer augmentation, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol.475, 2019.

Sharma, Arun K.; Bhattacharya, Bishakh, Parameter estimation of butyl rubber aided with dynamic mechanical analysis for numerical modelling of an air-inflated torus and experimental validation using 3D-laser Doppler vibrometer, JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, Vol.38, 2019.

Sharma, Eshan; De, Santanu, Large Eddy Simulation-Based Turbulent Combustion Models for Reactive Sprays: Recent Advances and Future Challenges, JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, Vol.99, 2019.

Chanda, Samarjeet; Singh, Raghvendra Pratap, Prediction of gas production potential and hydrological properties of a methane hydrate reservoir using ANN-GA based framework, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.11, 2019.

Upadhyay, Ram Krishna; Kumar, Arvind, Effect of particle weight concentration on the lubrication properties of graphene based epoxy composites, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, Vol.33, 2019.

Patel, Divyansh Singh; Singh, Abhilasha; Jain, V. K.; Ramkumar, J.; Shrivastava, A., Investigations into insertion force of electrochemically micro-textured hypodermic needles, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Ghai, Sanjeev Kumar; De, Santanu, Numerical investigation of flow and scalar fields of piloted, partially-premixed dimethyl ether/air jet flames using stochastic multiple mapping conditioning approach, COMBUSTION AND FLAME, Vol.208, 2019.

Gohil, Trushar B.; Saha, Arun K., Numerical simulation of forced circular jets: Effect of flapping perturbation, PHYSICS OF FLUIDS, Vol.31, 2019.

Saroj, Sunil Kumar; Panigrahi, Pradipta Kumar, Drying pattern and evaporation dynamics of sessile ferrofluid droplet on a PDMS substrate, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, Vol.580, 2019.

Tiwari, Vipul Kumar; Kumar, Alok; Kumar, Arvind, Enhancing ice slurry generation by using inclined cavity for subzero cold thermal energy storage: Simulation, experiment and performance analysis, ENERGY, Vol.183, 2019.

Kene, Amarjit P.; Choudhury, Sounak K., Analytical modeling of tool health monitoring system using multiple sensor data fusion approach in hard machining, MEASUREMENT, Vol.145, 2019.

Dixit, Kartikeya; Sinha, Niraj, Compressive Strength Enhancement of Carbon Nanotube Reinforced 13-93B1 Bioactive Glass Scaffolds, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, Vol.19, 2019.

Bangari, Raghubeer S.; Sinha, Niraj, Adsorption of tetracycline, ofloxacin and cephalexin antibiotics on boron nitride nanosheets from aqueous solution, JOURNAL OF MOLECULAR LIQUIDS, Vol.293, 2019.

Upadhyay, R. K.; Kumar, A., Effect of humidity on the synergy of friction and wear properties in ternary epoxy-graphene-MoS2 composites, CARBON, Vol.146, 2019.

Ghai, Sanjeev Kumar; De, Santanu, Numerical modeling of turbulent premixed combustion using RANS based stochastic multiple mapping conditioning approach, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.37, 2019.

Srivastava, Arpit Kumar; Basu, Sumit, Modelling the performance of devices based on thin dielectric elastomer membranes, MECHANICS OF MATERIALS, Vol.137, 2019.

Mandal, Ashok Kumar; Wahi, Pankaj, Coupled plate-string vibrations in the presence of a finite bridge: Effect on natural frequencies and harmonicity, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.146, 2019.

Agarwal, Avinash Kumar; Sharma, Nikhil; Singh, Akhilendra Pratap; Kumar, Vikram; Satsangi, Dev Prakash; Patel, Chetankumar, Adaptation of Methanol-Dodecanol-Diesel Blend in Diesel Genset Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.141, 2019.

Upadhyay, Ram Krishna; Kumar, Arvind, Boundary lubrication properties and contact mechanism of carbon/MoS2 based nanolubricants under steel/steel contact, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, Vol.31, 2019.

Maurya, Gaurav; Sharma, Basant Lal, Scattering by two staggered semi-infinite cracks on square lattice: an application of asymptotic Wiener-Hopf factorization, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.70, 2019.

Behera, Sachidananda; Saha, Arun K., Characteristics of the Flow Past a Wall-Mounted Finite-Length Square Cylinder at Low Reynolds Number With Varying Boundary Layer Thickness, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol.141, 2019.

Mishra, Ashish Kumar; Kumar, Arvind, Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V, OPTICS AND LASER TECHNOLOGY, Vol.111, 2019.

Guruprasad, Thimmappa Shetty; Basu, Sumit, Some issues concerning the use of a single, material specific length scale parameter in theories of higher order strain gradient plasticity, MECHANICS OF MATERIALS, Vol.136, 2019.

Bari, Pritam; Law, Mohit; Wahi, Pankaj, Improved chip thickness model for serrated end milling, CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, Vol.25, 2019.

Aggarwal, Akash; Patel, Sushil; Kumar, Arvind, Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior, JOM, Vol.71, 2019.

Jindal, Puneet; Bhattacharya, Jishnu, Review-Understanding the Thermal Runaway Behavior of Li-Ion Batteries through Experimental Techniques, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.166, 2019.

Reddy, Soma Sekhar; Soni, Vikram; Kumar, Arvind, Diurnal thermal performance characterization of a solar air heater at local and global scales integrated with thermal battery, ENERGY, Vol.177, 2019.

Kumar, Abhay; Saha, Arun K.; Panigrahi, Pradipta Kumar; Karn, Ashish, On the flow physics and vortex behavior of rectangular orifice synthetic jets, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.103, 2019.

Kumar, Alok; Yadav, Sateesh Kumar; Mahato, Ankit; Kumar, Arvind, On-demand intermittent ice slurry generation for subzero cold thermal energy storage: Numerical simulation and performance analysis, APPLIED THERMAL ENGINEERING, Vol.161, 2019.

Sharma, Shashank; Mandal, Vijay; Ramakrishna, S. A.; Ramkumar, J., Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications, JOURNAL OF MANUFACTURING PROCESSES, Vol.39, 2019.

Chandraprakash, C.; Krishnamurthy, C., V; Balasubramaniam, Krishnan, Thermomechanical Phenomenon: A Non-destructive Evaluation Perspective, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.72, 2019.

Sharma, Nikhil; Patel, Chetankumar; Tiwari, Nachiketa; Agarwal, Avinash Kumar, Experimental investigations of noise and vibration characteristics of gasoline-methanol blend fuelled gasoline direct injection engine and their relationship with combustion characteristics, APPLIED THERMAL ENGINEERING, Vol.158, 2019.

Nath, Binita; Bidkar, Anil P.; Kumar, Vikash; Dalal, Amaresh; Jolly, Mohit Kumar; Ghosh, Siddhartha S.; Biswas, Gautam, Deciphering Hydrodynamic and Drug-Resistant Behaviors of Metastatic EMT Breast Cancer Cells Moving in a Constricted Microcapillary, JOURNAL OF CLINICAL MEDICINE, Vol.8, 2019.

Muaz, Muhammed; Choudhury, Sounak Kumar, Enhancing the tribological aspects of machining operation by hybrid lubrication-assisted side-flank-face laser-textured milling insert, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.41, 2019.

Sharma, Nikhil; Agarwal, Avinash Kumar, Particle Characterization of Soot Aggregates Emitted by Gasohol Fueled Direct Injection Engine, ENERGY & FUELS, Vol.33, 2019.

Crane, Jackson; Shi, Xian; Singh, Ajay, V; Tao, Yujie; Wang, Hai, Isolating the effect of induction length on detonation structure: Hydrogen-oxygen detonation promoted by ozone, COMBUSTION AND FLAME, Vol.200, 2019.

Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Ramesh, M. R., Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.

Agarwal, Avinash Kumar; Jiotode, Yeshudas; Sharma, Nikhil, Endoscopic visualization of engine combustion chamber using diesoline, diesosene and mineral diesel for comparative spatial soot and temperature distributions, FUEL, Vol.241, 2019.

Bhattacharya, Shashwat; Samtaney, Ravi; Verma, Mahendra K., Scaling and spatial intermittency of thermal dissipation in turbulent convection, PHYSICS OF FLUIDS, Vol.31, 2019.

Babu, R.; Das, Malay K., Experimental studies of natural convective mass transfer in a water-splitting system, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.44, 2019.

Sharma, Ishan, High-speed impacts of slender bodies into non-smooth, complex fluids, JOURNAL OF FLUID MECHANICS, Vol.861, 2019.

Bhattacharjee, Arindam; Mohanty, Atanu K.; Chatterjee, Anindya, Expansion of Preisach density in magnetic hysteresis using general basis functions, APPLIED MATHEMATICS AND COMPUTATION, Vol.341, 2019.

Ghai, Sanjeev Kumar; De, Santanu; Kronenburg, Andreas, Numerical simulations of turbulent lifted jet diffusion flames in a vitiated coflow using the stochastic multiple mapping conditioning approach, PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol.37, 2019.

Kumar, P. Arun; Aileni, Manideep; Rathakrishnan, E., Impact of tab location relative to the nozzle exit on the shock structure of a supersonic jet, PHYSICS OF FLUIDS, Vol.31, 2019.

Sharma, Sumit; Kumar, Pramod; Chandra, Rakesh; Setia, Prince, Prediction of properties of silica nanoparticle/hydroxyapatite fiber reinforced Bis-GMA/TEGDMA composites using molecular dynamics, COMPUTATIONAL MATERIALS SCIENCE, Vol.158, 2019.

Sharma, Ishan, Structural integrity of rubble asteroidal satellites, ICARUS, Vol.319, 2019.

Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, Performance and emission evaluation of a small-bore biodiesel compression-ignition engine, ENERGY, Vol.183, 2019.

Sankar, M. R.; Jain, V. K.; Ramkumar, J.; Sareen, S. K.; Singh, S., Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber, FUEL, Vol.235, 2019.

Swain, Digendranath; Gupta, Anurag, Mechanochemical aspects of skin wound healing in microgravity, MECHANICS RESEARCH COMMUNICATIONS, Vol.96, 2019.

Banerjee, Arnab; Das, Raj; Calius, Emilio P., Waves in Structured Mediums or Metamaterials: A Review, ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, Vol.26, 2019.

Chandran, Krishna; Saha, Arun K.; Mohapatra, Pranab K., Simulation of free surface flows with non-hydrostatic pressure distribution, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.44, 2019.

Afzal, Arshad; Kim, Kwang-Yong; Muralidhar, Krishnamurthy; Samad, Abdus; Benini, Ernesto, Optimization with Surrogate Models: Flow and Heat Transfer Applications, MATHEMATICAL PROBLEMS IN ENGINEERING, Vol.2019, 2019.

Sampath, Santhakumar; Bhattacharya, Bishakh; Aryan, Pouria; Sohn, Hoon, A Real-Time, Non-Contact Method for In-Line Inspection of Oil and Gas Pipelines Using Optical Sensor Array, SENSORS, Vol.19, 2019.

Chauhan, Pankaj Singh; Kant, Rishi; Rai, Ashutosh; Gupta, Ankur; Bhattacharya, Shantanu, Facile synthesis of ZnO/GO nanoflowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation, MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, Vol.89, 2019.

Nandukumar, Yada; Chakraborty, Suman; Verma, Mahendra K.; Lakkaraju, Rajaram, On heat transport and energy partition in thermal convection with mixed boundary conditions, PHYSICS OF FLUIDS, Vol.31, 2019.

Ramesh, S.; Nayaka, H. Shivananda; Sahu, Sandeep; Gopi, K. R.; Shivaram, M. J.; Arya, Shashibhushan, Influence of Multiaxial Cryoforging on Microstructural, Mechanical, and Corrosion Properties of Copper-Titanium Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.

Gupta, Chirag; Jha, Jyoti S.; Jayabalan, Bhagyaraj; Gujrati, Rajat; Alankar, Alankar; Mishra, Sushil, Correlating Hot Deformation Parameters with Microstructure Evolution During Thermomechanical Processing of Inconel 718 Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol.50A, 2019.

Kumar, Prem; Khandekar, Sameer; Maydanik, Yuri F.; Bhattacharya, Bishakh, Effect of Vibrations on Thermal Performance of Miniature Loop Heat Pipe for Avionics Cooling: An Experimental Analysis, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol.141, 2019.

Ranmode, Vaibhav; Bhattacharya, Jishnu, Macroscopic modelling of the discharge behaviour of sodium air flow battery, JOURNAL OF ENERGY STORAGE, Vol.25, 2019.

Gupta, Prince, Surface Plasmon-Assisted Modification of ((3)) Non-Linearity in a Three-Level Active Medium Near Gold Grating, PLASMONICS, Vol.14, 2019.

Saha, Arun K.; Chanda, Sourayon, Fully-developed natural convection in a periodic array of pin-fins, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.137, 2019.

Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Mechanism of material removal during nanofinishing of aluminium in aqueous KOH: A reactive molecular dynamics simulation study, COMPUTATIONAL MATERIALS SCIENCE, Vol.156, 2019.

Singh, Manmeet; Bhattacharya, Jishnu, Experimental demonstration of the thermodynamic advantage of modular heat storage system for a variable-temperature input, THERMAL SCIENCE AND ENGINEERING PROGRESS, Vol.13, 2019.

Bhatt, Geeta; Mishra, Keerti; Ramanathan, Gurunath; Bhattacharya, Shantanu, Dielectrophoresis assisted impedance spectroscopy for detection of gold-onjugated amplified DNA samples, SENSORS AND ACTUATORS B-CHEMICAL, Vol.288, 2019.

Muaz, Muhammed; Choudhury, Sounak Kumar, Experimental investigations and multi-objective optimization of MQL-assisted milling process for finishing of AISI 4340 steel, MEASUREMENT, Vol.138, 2019.

Singh, Mahavir; Singh, Amandeep; Ramkumar, J., Thin-wall micromachining of Ti-6Al-4V using micro-wire electrical discharge machining process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.41, 2019.

Sharma, Ankush P.; Khan, Sanan H.; Parameswaran, Venkitanarayanan, Response and failure of fiber metal laminates subjected to high strain rate tensile loading, JOURNAL OF COMPOSITE MATERIALS, Vol.53, 2019.

Kumar, Saurav; Rani, Pooja; Patnaik, Amar; Pradhan, Ajaya Kumar; Kumar, Vinod, Effect of cobalt content on wear behaviour of Al(0.4)FeCrNiCox (x=0, 0.25, 0.5, 1.0 mol) high entropy alloys tested under demineralised water with and without 3.5% NaCl solution, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.

Chowdhury, Anirban; Nishad, Shyam Sunder; Meena, Yogesh Kumar; Dutta, Ashish; Prasad, Girijesh, Hand-Exoskeleton Assisted Progressive Neurorehabilitation Using Impedance Adaptation Based Challenge Level Adjustment Method, IEEE TRANSACTIONS ON HAPTICS, Vol.12, 2019.

Karsh, P. K.; Mukhopadhyay, T.; Chakraborty, S.; Naskar, S.; Dey, S., A hybrid stochastic sensitivity analysis for low-frequency vibration and low-velocity impact of functionally graded plates, COMPOSITES PART B-ENGINEERING, Vol.176, 2019.

Ghai, Sanjeev Kumar; De, Santanu, Numerical investigation of auto-igniting turbulent lifted CH4/air jet diffusion flames in a vitiated co-flow using a RANS based stochastic multiple mapping conditioning approach, COMBUSTION AND FLAME, Vol.203, 2019.

Patel, Chetankumar; Tiwari, Nachiketa; Agarwal, Avinash Kumar, Experimental investigations of Soyabean and Rapeseed SVO and biodiesels on engine noise, vibrations, and engine characteristics, FUEL, Vol.238, 2019.

Punati, Venugopala Swami; Sharma, Ishan; Wahi, Pankaj, An exact dual-integral formulation of the indentation of finite, free-standing, end-supported adhesive elastic layers, MATHEMATICS AND MECHANICS OF SOLIDS, Vol.24, 2019.

Penke, Yaswanth K.; Anantharaman, Ganapathi; Ramkumar, Janakarajan; Kar, Kamal K., Redox synergistic Mn-Al-Fe and Cu-Al-Fe ternary metal oxide nano adsorbents for arsenic remediation with environmentally stable As(0) formation, JOURNAL OF HAZARDOUS MATERIALS, Vol.364, 2019.

Raja, R.; Dutta, A.; Dasgupta, B., Learning framework for inverse kinematics of a highly redundant mobile manipulator, ROBOTICS AND AUTONOMOUS SYSTEMS, Vol.120, 2019.

Basu, Aviru Kumar; Chauhan, Pankaj Singh; Awasthi, Mohit; Bhattacharya, Shantanu, alpha-Fe2O3 loaded rGO nanosheets based fast response/recovery CO gas sensor at room temperature, APPLIED SURFACE SCIENCE, Vol.465, 2019.

Moghadam, Soroush; Dalal, Indranil Saha; Larson, Ronald G., Unraveling Dynamics of Entangled Polymers in Strong Extensional Flows, MACROMOLECULES, Vol.52, 2019.

Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Ramesh, M. R., Investigation of dry sliding wear properties of multi-directional forged Mg-Zn alloys, JOURNAL OF MAGNESIUM AND ALLOYS, Vol.7, 2019.

Singh, Abhilasha; Patel, Divyansh Singh; Ramkumar, J.; Balani, Kantesh, Single step laser surface texturing for enhancing contact angle and tribological properties, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Molecular Dynamics Simulation of Mechanical Polishing on Stainless Steel Using Diamond Nanoparticles, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, Vol.141, 2019.

Anas, Mohammad; Verma, Mahendra K., Modeling Ekman and quasi-static magnetohydrodynamic turbulence using Pao's hypothesis, PHYSICAL REVIEW FLUIDS, Vol.4, 2019.

Singh, Sarthak S.; Kitey, Rajesh; Venkitanarayanan, Parameswaran, Effect of post cure temperature cycle on dynamic compression behavior of glass filled epoxy composites, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol.26, 2019.

Penke, Yaswanth K.; Tiwari, Nidhi; Jha, Shambunath; Bhattacharyya, Dibyendu; Ramkumar, Janakarajan; Kar, Kamal K., Arsenic surface complexation behavior in aqueous systems onto Al substituted Ni, Co, Mn, and Cu based ferrite nano adsorbents, JOURNAL OF HAZARDOUS MATERIALS, Vol.361, 2019.

Khan, Haroon; Kim, Chul Min; Kim, Sung Yeol; Goel, Sanket; Dwivedi, Prabhat K.; Sharma, Ashutosh; Kim, Young Ho; Kim, Gyu Man, Fabrication of Enzymatic Biofuel Cell with Electrodes on Both Sides of Microfluidic Channel, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol.6, 2019.

Kalra, Sahil; Munjal, B. S.; Singh, Vaibhav Raj; Mahajan, Milind; Bhattacharya, Bishakh, Investigations on the suitability of PEEK material under space environment conditions and its application in a parabolic space antenna, ADVANCES IN SPACE RESEARCH, Vol.63, 2019.

Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. S.; Mallick, Tapas K., Optimization of fins fitted phase change material equipped solar photovoltaic under various working circumstances, ENERGY CONVERSION AND MANAGEMENT, Vol.180, 2019.

Chouksey, Mayank; Keralavarma, Shyam M.; Basu, Sumit, Computational investigation into the role of localisation on yield of a porous ductile solid, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol.130, 2019.

Khan, Haroon; Kim, Chul Min; Kim, Sung Yeol; Goel, Sanket; Dwivedi, Prabhat K.; Sharma, Ashutosh; Kim, Young Ho; Kim, Gyu Man, Fabrication of Enzymatic Biofuel Cell with Electrodes on Both Sides of Microfluidic Channel (vol 6, pg 511, 2019), INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, Vol.6, 2019.

Shirsath, Ganesh B.; Muralidhar, K.; Pala, Raj Ganesh S.; Ramkumar, J., Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge, APPLIED SURFACE SCIENCE, Vol.484, 2019.

Singh, Gaganpreet; Sheokand, Harsh; Ghosh, Saptarshi; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Excimer laser micromachining of indium tin oxide for fabrication of optically transparent metamaterial absorbers, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol.125, 2019.

Kumar, Prabhat; Saxena, Anupam; Sauer, Roger A., Computational Synthesis of Large Deformation Compliant Mechanisms Undergoing Self and Mutual Contact, JOURNAL OF MECHANICAL DESIGN, Vol.141, 2019.

Gangwar, Swati; Patnaik, Amar; Yadav, Prabhat Chand; Sahu, Sandeep; Bhat, I. K., Development and properties evaluation of marble dust reinforced ZA-27 alloy composites for ball bearing application, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.

Kumar, P. Arun; Kumar, S. M. Aravindh; Mitra, A. Surya; Rathakrishnan, E., Empirical scaling analysis of supersonic jet control using steady fluidic injection, PHYSICS OF FLUIDS, Vol.31, 2019.

Silveira, M.; Wahi, P.; Fernandes, J. C. M., Exact and approximate analytical solutions of oscillator with piecewise linear asymmetrical damping, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.110, 2019.

Kumar, Ravindra; Varshney, Suyash; Kar, Kamal K.; Dasgupta, Kinshuk, Fabrication and Characterization of Eco-Friendly Human-Hair Derived Porous Carbon-Filled Carbon Fabric-Reinforced Polymer Composites, POLYMER COMPOSITES, Vol.40, 2019.

Bhattacharya, Shashwat; Sadhukhan, Shubhadeep; Guha, Anirban; Verma, Mahendra K., Similarities between the structure functions of thermal convection and hydrodynamic turbulence, PHYSICS OF FLUIDS, Vol.31, 2019.

Basu, Aviru Kumar; Sah, Amar Nath; Pradhan, Asima; Bhattacharya, Shantanu, Poly-L-Lysine functionalised MWCNT-rGO nanosheets based 3-d hybrid structure for femtomolar level cholesterol detection using cantilever based sensing platform, SCIENTIFIC REPORTS, Vol.9, 2019.

Vashishtha, Sumit; Samuel, Roshan; Chatterjee, Anando Gopal; Samtaney, Ravi; Verma, Mahendra K., Large eddy simulation of hydrodynamic turbulence using renormalized viscosity, PHYSICS OF FLUIDS, Vol.31, 2019.

Mishra, Alok; Jithin, M.; De, Ashoke; Das, Malay Kumar, Effect of Passive Flow Control of Bifurcation Phenomenon in Sudden Expansion Channel, PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES INDIA SECTION A-PHYSICAL SCIENCES, Vol.89, 2019.

Baghel, Vishakha; Sikarwar, Basant Singh; Muralidhar, K., Modeling of heat transfer through a liquid droplet, HEAT AND MASS TRANSFER, Vol.55, 2019.

Singh, Sarthak S.; Parameswaran, Venkitanarayanan; Kitey, R., Dynamic compression behavior of glass filled epoxy composites: Influence of filler shape and exposure to high temperature, COMPOSITES PART B-ENGINEERING, Vol.164, 2019.

Setu, Sagar; Abhishek, Abhishek; Venkatesan, C., Time-Domain System Identification of Helicopters Using Nonlinear Acceleration and Jerk Prediction Model, JOURNAL OF AIRCRAFT, Vol.56, 2019.

Chandraprakash, C.; Venugopal, Vijayakumar C.; Lakhtakia, Akhlesh; Awadelkarim, Osama O., Long-wavelength infrared characteristics of multifunctional microfibrous thin films of Parylene C, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, Vol.61, 2019.

Goel, M. D.; Parameswaran, Venkitanarayanan; Mondal, D. P., High Strain Rate Response of Cenosphere-Filled Aluminum Alloy Syntactic Foam, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28, 2019.

Selyutina, N. S.; Petrov, Yu, V; Parameswaran, V; Sharma, A. P., The Strain-Rate Sensitivity of Irreversible Deformation of the Metallic Multilayer Composite GLARE, DOKLADY PHYSICS, Vol.64, 2019.

Sarkar, Abhishek; Dutta, Ashish, Optimal Trajectory Generation and Design of an 8-DoF Compliant Biped Robot for Walk on Inclined Ground, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, Vol.94, 2019.

Parameswari, G.; Jain, V. K.; Ramkumar, J.; Nagdeve, Leeladhar, Experimental investigations into nanofinishing of Ti6Al4V flat disc using magnetorheological finishing process, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Raj, Raunak; Guha, Anirban, Explosive instability due to flow over a rippled bottom, NONLINEAR PROCESSES IN GEOPHYSICS, Vol.26, 2019.

Jain, Vijay Kumar; Saren, Kisun Kumar; Raghuram, V.; Sankar, M. Ravi, Force analysis of magnetic abrasive nano-finishing of magnetic and non-magnetic materials, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Patel, Divyansh Singh; Jain, V. K.; Shrivastava, Ankit; Ramkumar, J., Electrochemical micro texturing on flat and curved surfaces: simulation and experiments, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.100, 2019.

Yadav, Amit; De, Bibekananda; Singh, Sandeep K.; Sinha, Prerna; Kar, Kamal K., Facile Development Strategy of a Single Carbon-Fiber-Based All-Solid-State Flexible Lithium-Ion Battery for Wearable Electronics, ACS APPLIED MATERIALS & INTERFACES, Vol.11, 2019.

Khan, Sanan H.; Sharma, Ankush P., Failure assessment of fiber metal laminates based on metal layer dispersion under dynamic loading scenario, ENGINEERING FAILURE ANALYSIS, Vol.106, 2019.

Singh, M.; Ramkumar, J.; Rao, R., V; Balic, J., Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm, ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, Vol.14, 2019.

Soni, Vikram; Kumar, Arvind; Jain, V. K., A novel solidification model considering undercooling effect for metal based low temperature latent thermal energy management, JOURNAL OF ENERGY STORAGE, Vol.21, 2019.

Alam, Shadab; Guha, Anirban; Verma, Mahendra K., Revisiting Bolgiano-Obukhov scaling for moderately stably stratified turbulence, JOURNAL OF FLUID MECHANICS, Vol.875, 2019.

Dutta, Samik; Karmakar, Abhishek; Roy, Himadri; Barat, Kaustav, Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation, MEASUREMENT, Vol.134, 2019.

Yadav, Sateesh Kumar; Ziyad, Devshibhai; Kumar, Arvind, Numerical investigation of isothermal and non-isothermal ice slurry flow in horizontal elliptical pipes, INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol.97, 2019.

Upadhyay, R. K.; Kumar, A., Epoxy-graphene-MoS2 composites with improved tribological behavior under dry sliding contact, TRIBOLOGY INTERNATIONAL, Vol.130, 2019.

Surthi, Kiran Kumar; Kar, Kamal K.; Janakarajan, Ramkumar, Enhanced microwave sintering characteristics, electrical and thermal properties of nano Li2TiO3 ceramic and its nanocomposite using LiNi0.5Co0.5PO4 as high-capacity cathode for Li-ion batteries, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol.135, 2019.

Patel, Vinay Kumar; Kant, Rishi; Choudhary, Anu; Painuly, Madhusudan; Bhattacharya, Shantanu, Performance characterization of Bi2O3/Al nanoenergetics blasted micro-forming system, DEFENCE TECHNOLOGY, Vol.15, 2019.

Kumar, R. R.; Mukhopadhyay, T.; Naskar, S.; Pandey, K. M.; Dey, S., Stochastic low-velocity impact analysis of sandwich plates including the effects of obliqueness and twist, THIN-WALLED STRUCTURES, Vol.145, 2019.

Mishra, Gaurav; Mandariya, Anil Kumar; Tripathi, S. N.; Mariam; Joshi, Manish; Khan, Arshad; Sapra, B. K., Hygroscopic growth of CsI and CsOH particles in context of nuclear reactor accident research, JOURNAL OF AEROSOL SCIENCE, Vol.132, 2019.

Hwang, Joonsik; Hirner, Felix Sebastian; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine, APPLIED THERMAL ENGINEERING, Vol.159, 2019.

Sonar, Prasad; Modi, Sachin; Sharma, Ishan, Estimating forces during ploughing of a granular bed, JOURNAL OF FLUID MECHANICS, Vol.875, 2019.

Tharayil, Abhimanyu; Banerjee, Soma; Kar, Kamal K., Dynamic mechanical properties of zinc oxide reinforced linear low density polyethylene composites, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.

Raj, Raunak; Guha, Anirban, On Bragg resonances and wave triad interactions in two-layered shear flows, JOURNAL OF FLUID MECHANICS, Vol.867, 2019.

Medhi, Tanmoy; Yadava, Manasij Kumar; Roy, Barnik Saha; Saha, Subhash Chandra, An experimental investigation on implications of traverse speed in joining of dissimilar Al-Cu by friction stir welding, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.104, 2019.

Mukherjee, Dipayan; Sharma, Ishan; Gupta, Shakti S., Dynamics and Stability of Variable-Length, Vertically-Traveling, Heavy Cables: Application to Tethered Aerostats, JOURNAL OF AIRCRAFT, Vol.56, 2019.

Sundriyal, Poonam; Bhattacharya, Shantanu, Scalable Micro-fabrication of Flexible, Solid-State, Inexpensive, and High-Performance Planar Micro-supercapacitors through Inkjet Printing, ACS APPLIED ENERGY MATERIALS, Vol.2, 2019.

Ramesh, S.; Nayaka, H. Shivananda; Gopi, K. R.; Sahu, Sandeep, Effect of multiaxial cryoforging on microstructure and mechanical properties of a Cu-Ti Alloy, MATERIALS RESEARCH EXPRESS, Vol.6, 2019.

Bangari, Raghubeer S.; Singh, Arun K.; Namsani, Sadanandam; Singh, Jayant K.; Sinha, Niraj, Magnetite-Coated Boron Nitride Nanosheets for the Removal of Arsenic(V) from Water, ACS APPLIED MATERIALS & INTERFACES, Vol.11, 2019.

Carpenter, J. R.; Guha, A., Instability of a smooth shear layer through wave interactions, PHYSICS OF FLUIDS, Vol.31, 2019.

Wu, J.; Zhang, C.; Wang, Y.; Su, B.; Gond, B., Investigation on Wet Skid Resistance of Tread Rubber, EXPERIMENTAL TECHNIQUES, Vol.43, 2019.

Chauhan, Pankaj Singh; Bhattacharya, Shantanu, Hydrogen gas sensing methods, materials, and approach to achieve parts per billion level detection: A review, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.44, 2019.

Bhattacharjee, Arindam; Shah, Kushal; Chatterjee, Anindya, Unifying averaged dynamics of the Fokker-Planck equation for Paul traps, PHYSICS OF PLASMAS, Vol.26, 2019.

Bhandari, Ajay; Bansal, Ankit; Sing, Anup; Gupta, Rakesh Kumar; Sinha, Niraj, Comparison of transport of chemotherapeutic drugs in voxelized heterogeneous model of human brain tumor, MICROVASCULAR RESEARCH, Vol.124, 2019.

Dwivedi, A. K.; Khan, Arshad; Tripathi, S. N.; Joshi, Manish; Mishra, Gaurav; Nath, Dinesh; Tiwari, Naveen; Sapra, B. K., Aerosol depositional characteristics in piping assembly under varying flow conditions, PROGRESS IN NUCLEAR ENERGY, Vol. 116, 2019.

Singh, Sandeep Kumar; Akhtar, M. J.; Kar, Kamal K., Impact of Al2O3, TiO2, ZnO and BaTiO3 on the microwave absorption properties of exfoliated graphite/epoxy composites at X-band frequencies, COMPOSITES PART B-ENGINEERING, Vol. 167, 2019.

Yadav, Surekha; Aggrawal, Akash; Kumar, Arvind; Biswas, Krishanu, Effect of TiB2 addition on wear behavior of (AlCrFeMnV)(90)Bi-10 high entropy alloy composite, TRIBOLOGY INTERNATIONAL, Vol. 132, 2019.

Naik, Gajanan M.; Narendranath, S.; Kumar, S. S. Satheesh; Sahu, Sandeep, Effect of Annealing and Aging Treatment on Pitting Corrosion Resistance of Fine-Grained Mg-8%Al-0.5%Zn Alloy, JOM, Vol. 71, 2019.

Bhola, Sahil; Sengupta, Tapan K., Roles of bulk viscosity on transonic shock-wave/boundary layer interaction, PHYSICS OF FLUIDS, Vol. 31, 2019.

Sadhukhan, Shubhadeep; Samue, Roshan; Plunian, Franck; Stepanov, Rodion; Samtaney, Ravi; Varma, Mahendra Kumar, Enstrophy transfers in helical turbulence, PHYSICAL REVIEW FLUIDS, Vol. 4, 2019.

Ariharan, S.; Wangaskar, Bhimashankar; Xavier, Vincent; Venkateswaran, T.; Balani, Kantesh, Process induced alignment of carbon nanotube decreases longitudinal thermal conductivity of Al2O3 based porous composites, CERAMICS INTERNATIONAL, Vol. 45, 2019.

Ramesh, S.; Anne, Gajanan; Nayaka, H. Shivananda; Sahu, Sandeep; Arya, Shashibhushan, Effects of combined multiaxial forging and rolling process on microstructure, mechanical properties and corrosion behavior of a Cu-Ti alloys, MATERIALS RESEARCH EXPRESS, Vol. 6, 2019.

Sharma, Nikhil; Agarwal, Rashmi A.; Agarwal, Avinash Kumar, Particulate Bound Trace Metals and Soot Morphology of Gasohol Fueled Gasoline Direct Injection Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019.

Titov, V; Stepanov, R.; Yokoi, N.; Verma, M.; Samtaney, R., CROSS HELICITY SIGN REVERSALS IN THE DISSIPATIVE SCALES OF MAGNETOHYDRODYNAMIC TURBULENCE, MAGNETOHYDRODYNAMICS, Vol. 55, 2019.

Nair, Ranjith Ravindranathan; Karki, Hamad; Shukla, Amit; Behera, Laxmidhar; Jamshidi, Mo, Fault-Tolerant Formation Control of Nonholonomic Robots Using Fast Adaptive Gain Nonsingular Terminal Sliding Mode Control, IEEE SYSTEMS JOURNAL, Vol. 13, 2019.

Suman, V. K.; Viknesh, Siva S.; Tekriwal, Mohit K.; Bhaumik, Swagata; Sengupta, Tapan K., Grid sensitivity and role of error in computing a lid-driven cavity problem, PHYSICAL REVIEW E, Vol. 99, 2019.

Patrikar, Jay; Makkapati, Venkata Ramana; Pattanaik, Anay; Parwana, Hardik; Kothari, Mangal, Nested Saturation Based Guidance Law for Unmanned Aerial Vehicles, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, Vol. 141, 2019.

Liu, Changran; Singh, Ajay V.; Saggese, Chiara; Tang, Quanxi; Chen, Dongping; Wan, Kevin; Vinciguerra, Marianna; Commodo, Mario; De Falco, Gianluigi; Minutolo, Patrizia; D'Anna, Andrea; Wang, Hai, Flame-formed carbon nanoparticles exhibit quantum dot behaviors, PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, Vol. 116, 2019.

Moghadam, Soroush; Saha Dalal, Indranil; Larson, Ronald G., Slip-Spring and Kink Dynamics Models for Fast Extensional Flow of Entangled Polymeric Fluids, POLYMERS, Vol. 11, 2019.

Tripathi, Pragya; Ramkumar, J.; Balani, Kantesh, Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes, SURFACE & COATINGS TECHNOLOGY, Vol. 378, 2019.

Kant, Rishi; Bhatt, Geeta; Patel, Vinay Kumar; Ganguli, Anurup; Singh, Deepak; Nayak, Monalisha; Mishra, Keerti; Gupta, Ankur; Gangopadhyay, Keshab; Gangopadhyay, Shubhra; Ramanathan, Gurunath; Bhattacharya, Shantanu, Synchronized Electromechanical Shock Wave-Induced Bacterial Transformation, ACS OMEGA, Vol. 4, 2019.

Patel, Chetankumar; Hwang, Joonsik; Chandra, Krishn; Agarwal, Rashmi A.; Bae, Choongsik; Gupta, Tarun; Agarwal, Avinash Kumar, In-Cylinder Spray and Combustion Investigations in a Heavy-Duty Optical Engine Fueled With Waste Cooking Oil, Jatropha, and Karanja Biodiesels, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 141, 2019.

Gupta, Akanksha; Jayaram, Rohith; Chaterjee, Anando G.; Sadhukhan, Shubhadeep; Samtaney, Ravi; Verma, Mahendra K., Energy and enstrophy spectra and fluxes for the inertial-dissipation range of two-dimensional turbulence, PHYSICAL REVIEW E, Vol. 100, 2019.

Sharma, Basant Lal; Eremeyev, Victor A., Wave transmission across surface interfaces in lattice structures, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 145, 2019.

Bhandari, Arihant; Gupta, Prashant Kumar; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Higher Energy Barrier for Interfacial Li-Ion Transfer from EC/LiPF6 Electrolyte into (010) LiFePO4 Cathode Surface than Bulk Li-Ion Diffusion within Both Cathode and Electrolyte, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol. 166, 2019.

Naorem, Rameshwari; Gupta, Anshul; Mantri, Sukriti; Sethi, Gurjyot; ManiKrishna, K. V.; Pala, Raj; Balani, Kantesh; Subramaniam, Anandh, A critical analysis of the X-ray diffraction intensities in concentrated multicomponent alloys, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 110, 2019.

Gupta, Prashant Kumar; Bhandari, Arihant; Saha, Sulay; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Modulating Oxygen Evolution Reactivity in MnO2 through Polymorphic Engineering, JOURNAL OF PHYSICAL CHEMISTRY C, Vol. 123, 2019.

Patel, Chetankumar; Chandra, Krishn; Hwang, Joonsik; Agarwal, Rashmi A.; Gupta, Neeraj; Bae, Choongsik; Gupta, Tarun; Agarwal, Avinash Kumar, Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels, FUEL, Vol. 236, 2019.

Khobragade, Rohini; Singh, Sunit Kumar; Shukla, Pravesh Chandra; Gupta, Tarun; Al-Fatesh, Ahmed S.; Agarwal, Avinash Kumar; Labhasetwar, Nitin K., Chemical composition of diesel particulate matter and its control, CATALYSIS REVIEWS-SCIENCE AND ENGINEERING, Vol. 61, 2019.

Singh, Gaganpreet; Sheokand, Harsh; Chaudhary, Kajal; Srivastava, Kumar Vaibhav; Ramkumar, J.; Ramakrishna, S. Anantha, Fabrication of a non-wettable wearable textile-based metamaterial microwave absorber, JOURNAL OF PHYSICS D-APPLIED PHYSICS, Vol. 52, 2019.

Tyagi, Alekha; Yadav, Amit; Sinha, Prerna; Singh, Shashank; Paik, Pradip; Kar, Kamal K., Chicken feather rachis: An improvement over feather fiber derived electrocatalyst for oxygen electroreduction, APPLIED SURFACE SCIENCE, Vol. 495, 2019.

Panigrahi, Ramanuja; Mishra, Santanu K.; Srivastava, Arpit Kumar; Basu, Sumit, Analysis, Design, and Implementation of an Elastomer Generator Based Energy Harvesting Scheme, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, Vol. 66, 2019.

Eremeyev, Victor A.; Sharma, Basant Lal, Anti-plane surface waves in media with surface structure: Discrete vs. continuum model, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 143, 2019.

Gao, Weilun; Shao, Dongdong; Wang, Zheng Bing; Nardin, William; Rajput, Prateek; Yang, Wei; Sun, Tao; Cui, Baoshan, Long-Term Cumulative Effects of Intra-Annual Variability of Unsteady River Discharge on the Progradation of Delta Lobes: A Modeling Perspective, JOURNAL OF GEOPHYSICAL RESEARCH-EARTH SURFACE, Vol. 124, 2019.

Kanchwala, Husain; Chatterjee, Anindya, ADAMS model validation for an all-terrain vehicle using test track data, ADVANCES IN MECHANICAL ENGINEERING, Vol. 11, 2019.

Gupta, Shashikant; Bhunia, Ritamay; Fatma, Bushara; Maurya, Deepam; Singh, Deepa; Prateek; Gupta, Rajeev; Priya, Shashank; Gupta, Raju Kumar; Garg, Ashish, Multifunctional and Flexible Polymeric Nanocomposite Films with Improved Ferroelectric and Piezoelectric Properties for Energy Generation Devices, ACS APPLIED ENERGY MATERIALS, Vol. 2, 2019.

Bharathan, Bhargav; McGuinness, Maureen; Kuhar, Sharun; Kermani, Mehrdad; Hassani, Ferri P.; Sasmito, Agus P., Pressure loss and friction factor in non-Newtonian mine paste backfill: Modelling, loop test and mine field data, POWDER TECHNOLOGY, Vol. 344, 2019.

Sheokand, Harsh; Singh, Gaganpreet; Ghosh, Saptarshi; Ramkumar, Janakarajan; Ramakrishna, Subramanian Anantha; Srivastava, Kumar Vaibhav, An Optically Transparent Broadband Microwave Absorber Using Interdigital Capacitance, IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, Vol. 18, 2019.

Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Reddy, K. S.; Mallick, Tapas K.; Radulovic, Jovana; Khusainov, Rinat; Hutchinson, David; Becerra, Victor, Electrical enhancement period of solar photovoltaic using phase change material, JOURNAL OF CLEANER PRODUCTION, Vol. 221, 2019.

Sauer, Roger A.; Ghaffari, Reza; Gupta, Anurag, The multiplicative deformation split for shells with application to growth, chemical swelling, thermoelasticity, viscoelasticity and elastoplasticity, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 174, 2019.

Swetha, T.; Karim, Mohammad Rezaul; Alharbi, Hamad F.; Alharthi, Nabeel H.; Bais, B.; Amin, Nowshad; Akhtaruzzaman, Md., Synthesis of new simple hole-transport materials bearing benzodithiazole based core for perovskite solar cells, SOLAR ENERGY, Vol. 194, 2019.

Sarvesha, R.; Alam, W.; Gokhale, A.; Guruprasad, T. S.; Bhagavath, S.; Karagadde, S.; Jain, J.; Singh, S. S., Quantitative assessment of second phase particles characteristics and its role I on the deformation response of a Mg-8Al-0.5Zn alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 759, 2019.

Jangir, Himanshi; Bhardwaj, Amarjeet; Ramkumar, Janakarajan; Sarkar, Sabyasachi; Das, Mainak, Induced Electron Transfer in Silk Cocoon Derived N-Doped Reduced Graphene Oxide-Mo-Li-S Electrode, FRONTIERS IN MATERIALS, Vol. 6, 2019.

Singh, Sandeep Kumar; Tiwari, Nilesh Kumar; Yadav, Amit Kumar; Akhtar, M. Jaleel; Kar, Kamal K., Design of ZnO/N-Doped Graphene Nanohybrid Incorporated RF Complementary Split Ring Resonator Sensor for Ammonia Gas Detection, IEEE SENSORS JOURNAL, Vol. 19, 2019.

Pal, Subhashis; Porwal, Konica; Khanna, Kunal; Gautam, Manoj Kumar; Malik, Mohd Yaseen; Rashid, Mamunur; Macleod, R. John; Wahajuddin, Muhammad; Parameswaran, Venkitanarayanan; Bellare, Jayesh R.; Chattopadhyay, Naibedya, Oral dosing of pentoxifylline, a pan-phosphodiesterase inhibitor restores bone mass and quality in osteopenic rabbits by an osteogenic mechanism: A comparative study with human parathyroid hormone, BONE, Vol. 123, 2019.

Bhattacharya, Pallab; Lee, Joong Hee; Kar, Kamal K.; Park, Ho Seok, Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery, CHEMICAL ENGINEERING JOURNAL, Vol. 369, 2019.

Ramesh, Srinivasagam; Bhuvaneshwari, B.; Palani, G. S.; Lal, D. Mohan; Mondal, K.; Gupta, Raju Kumar, Enhancing the corrosion resistance performance of structural steel via a novel deep cryogenic treatment process, VACUUM, Vol. 1592019.

Kumar, Rajesh; Sahoo, Sumanta; Joanni, Ednan; Singh, Rajesh Kumar; Tan, Wai Kian; Kar, Kamal Krishna; Matsuda, Atsunori, Recent progress in the synthesis of graphene and derived materials for next generation electrodes of high performance lithium ion batteries, PROGRESS IN ENERGY AND COMBUSTION SCIENCE, Vol. 752019.

Nagdeve, Leeladhar; Sidpara, Ajay; Jain, V. K.; Ramkumar, J., On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 

Tyagi, Aakash; Sharma, Vyom; Jain, V. K.; Ramkumar, J., Investigations into side gap in wire electrochemical micromachining (wire-ECMM), INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.94, 2018. 

Soni, Vikram; Kumar, Arvind; Jain, V. K., Modeling of PCM melting: Analysis of discrepancy between numerical and experimental results and energy storage performance, ENERGY, Vol.150, 2018. 

Soni, Vikram; Kumar, Arvind; Jain, V. K., Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery, RENEWABLE ENERGY, Vol.127, 2018. 

Voruganti, Hari K.; Dasgupta, Bhaskar, A novel volumetric criterion for optimal shape matching of surfaces for protein-protein docking, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, Vol.5, 2018. 

Kumar, Vikram; Sinha, Sujeet K.; Agarwal, Avinash K., Tribological studies of dual-coating (intermediate hard with top epoxy-graphene-base oil composite layers) on tool steel in dry and lubricated conditions, TRIBOLOGY INTERNATIONAL, Vol.127, 2018. 

Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.27, 2018. 

Chauhan, Pankaj Singh; Bhattacharya, Shantanu, Highly sensitive V2O5 center dot 1.6H2)O nanostructures for sensing of helium gas at room temperature, MATERIALS LETTERS, Vol.217, 2018. 

Desai, Chaitanya K.; Parameswaran, Venkitanarayanan; Basu, Sumit, Formulating a cohesive zone model for thin polycarbonate sheets using the concept of the essential work of fracture, ENGINEERING FRACTURE MECHANICS, Vol.201, 2018. 

Chanda, Samarjeet; Muralidhar, K.; Nimdeo, Yogesh M., Joint estimation of thermal and mass diffusivities of a solute-solvent system using ANN-GA based inverse framework, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.123, 2018. 

Sharma, Basant Lal, On prototypical wave transmission across a junction of waveguides with honeycomb structure, ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, Vol.69, 2018. 

Mistry, Aashutosh; Muralidhar, K., Spreading of a pendant liquid drop underneath a textured substrate, PHYSICS OF FLUIDS, Vol.30, 2018. 

Punetha, Maneesh; Choudhary, Ajay; Khandekar, Sameer, Stratification and mixing dynamics of helium in an air filled confined enclosure, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.43, 2018. 

Agrawal, Ashish; Ghoshdastidar, P. S., Computer Simulation of Heat Transfer in a Rotary Lime Kiln, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.10, 2018. 

Sharma, Basant Lal, Electronic transport across a junction between armchair graphene nanotube and zigzag nanoribbon, EUROPEAN PHYSICAL JOURNAL B, Vol.91, 2018. 

Das, Santanu; Wahi, Pankaj, Energy extraction from vortex-induced vibrations using period-1 rotation of an autoparametric pendulum, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 

Jose, Kevin; Chatterjee, Anindya; Gupta, Anurag, Acoustics of Idakka: An Indian snare drum with definite pitch, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol.143, 2018. 

Swain, Digendranath; Gupta, Anurag, Biological growth in bodies with incoherent interfaces, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 

Biswas, Saurabh; Chatterjee, Anindya, A two-state hysteresis model for bolted joints, with minor loops from partial unloading, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.140, 2018. 

Agarwal, Avinash Kumar; Gadekar, Suresh; Singh, Akhilendra Pratap, In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 

Singh, Sachin K.; Srinivasan, Vyas; Wangaskar, Bhimashankar; Khandekar, Sameer, Dynamic Evolution of an Evaporating Liquid Meniscus from Structured Screen Meshes, TRANSPORT IN POROUS MEDIA, Vol.121, 2018. 

Jain, V. K.; Chouksey, Ankit Kumar, A comprehensive analysis of three-phase electrolyte conductivity during electrochemical macromachining/micromachining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.232, 2018. 

Pisharody, Rahul; Gupta, Anurag, Experimental Investigations of Tanpura Acoustics, ACTA ACUSTICA UNITED WITH ACUSTICA, Vol.104, 2018. 

Upadhyay, R. K.; Kumar, A., A novel approach to minimize dry sliding friction and wear behavior of epoxy by infusing fullerene C-70 and multiwalled carbon nanotubes, TRIBOLOGY INTERNATIONAL, Vol.120, 2018. 

Gupta, Sunit K.; Wahi, Pankaj, Criticality of bifurcation in the tuned axial-torsional rotary drilling model, NONLINEAR DYNAMICS, Vol.91, 2018. 

Orra, Kashfull; Choudhury, Sounak K., Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process, JOURNAL OF MANUFACTURING PROCESSES, Vol.31, 2018. 

Usmani, Abdullah Y.; Muralidhar, K., Flow in an intracranial aneurysm model: effect of parent artery orientation, JOURNAL OF VISUALIZATION, Vol.21, 2018. 

Mishra, Ashish Kumar; Aggarwal, Akash; Kumar, Arvind; Sinha, Niraj, Identification of a suitable volumetric heat source for modelling of selective laser melting of Ti6Al4V powder using numerical and experimental validation approach, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.99, 2018. 

Roychowdhury, Ayan; Gupta, Anurag, On Structured Surfaces with Defects: Geometry, Strain Incompatibility, Stress Field, and Natural Shapes, JOURNAL OF ELASTICITY, Vol.131, 2018. 

Khan, Sanan H.; Sharma, Ankush P., Progressive damage modeling and interface delamination of cross-ply laminates subjected to low-velocity impact, JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol.53, 2018. 

Mannan, Sayyad; Parameswaran, Venkitanarayanan; Basu, Sumit, Stiffness and toughness gradation of bamboo from a damage tolerance perspective, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.143, 2018. 

Aggarwal, Akash; Kumar, Arvind, Particle Scale Modelling of Selective Laser Melting-Based Additive Manufacturing Process Using Open-Source CFD Code OpenFOAM, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 

Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Coalescence dynamics of sessile and pendant liquid drops placed on a hydrophobic surface, PHYSICS OF FLUIDS, Vol.30, 2018. 

Sharma, Ankush P.; Khan, Sanan H., Influence of metal layer distribution on the projectiles impact response of glass fiber reinforced aluminum laminates, POLYMER TESTING, Vol.70, 2018. 

Gautam, Ankit Kumar; Kumar, Sunil; Panigrahi, Pradipta Kumar, Porous shroud tube design evaluation of a control plug in a liquid metal cooled reactor, APPLIED THERMAL ENGINEERING, Vol.139, 2018. 

Bharti, Omprakash S.; Saha, Arun K.; Das, Malay K.; Bansal, Sohil, Simultaneous measurement of velocity and temperature fields during natural convection in a water-filled cubical cavity, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.99, 2018. 

Yadav, Mahesh Kumar; Singh, Sachin K.; Parwez, Ahsen; Khandekar, Sameer, Inverse models for transient wall heat flux estimation based on single and multi-point temperature measurements, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.124, 2018. 

Srivastava, Dhananjay Kumar; Agarwal, Avinash Kumar, Combustion characteristics of a variable compression ratio laser-plasma ignited compressed natural gas engine, FUEL, Vol.214, 2018. 

Murugan, Thangadurai; Dora, Chandrala Lakshmana; De, Sudipta; Das, Debopam, A comparative three-dimensional study of impulsive flow emanating from a shock tube for shock Mach number 1.6, JOURNAL OF VISUALIZATION, Vol.21, 2018. 

Satsangi, Dev Prakash; Tiwari, Nachiketa, Experimental investigation on combustion, noise, vibrations, performance and emissions characteristics of diesel/n-butanol blends driven genset engine, FUEL, Vol.221, 2018. 

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Experimental evaluation of sensitivity of low-temperature combustion to intake charge temperature and fuel properties, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, Vol.19, 2018. 

Patel, Divyansh; Jain, V. K.; Ramkumar, J., Micro texturing on metallic surfaces: State of the art, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol.232, 2018. 

Singh, Akhilendra Pratap; Bajpai, Nikhil; Agarwal, Avinash Kumar, Combustion Mode Switching Characteristics of a Medium-Duty Engine Operated in Compression Ignition/PCCI Combustion Modes, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 

Balija, Santhosh Kumar; Biswas, Saurabh; Chatterjee, Anindya, Stability aspects of the Hayes delay differential equation with scalable hysteresis, NONLINEAR DYNAMICS, Vol.93, 2018. 

Agarwal, Avinash Kumar; Singh, Akhilendra Pratap; Maurya, Rakesh Kumar; Shukla, Pravesh Chandra; Dhar, Atul; Srivastava, Dhananjay Kumar, Combustion characteristics of a common rail direct injection engine using different fuel injection strategies, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol.134, 2018. 

Reddy, Sarveshwar M.; Sharma, Nikhil; Gupta, Neeraj; Agarwal, Avinash Kumar, Effect of non-edible oil and its biodiesel on wear of fuel injection equipment components of a genset engine, FUEL, Vol.222, 2018. 

Guha, Anirban; Raj, Raunak, On the inertial effects of density variation in stratified shear flows, PHYSICS OF FLUIDS, Vol.30, 2018. 

Kar, Subhajit; Guha, Anirban, Letter: Ocean bathymetry reconstruction from surface data using hydraulics theory, PHYSICS OF FLUIDS, Vol.30, 2018. 

Raj, Arindam; Mokhalingam, Aningi; Gupta, Shakti S., Instabilities in carbon nanocone stacks, CARBON, Vol.127, 2018. 

Sharma, Ankush P.; Khan, Sanan H.; Kitey, Rajesh; Parameswaran, Venkitanarayanan, Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates, POLYMER TESTING, Vol.65, 2018. 

Gopi, K. R.; Nayaka, H. Shivananda; Sahu, Sandeep, Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol.43, 2018. 

Veettil, Sachin Krishnan Thekke; Das, Sovan Lal; Balagopal, Sunil Kumar Palakurissi, Interplay of Curvature Sensing and Generation Mediated by Peripheral Membrane Proteins, BIOPHYSICAL JOURNAL, Vol.114, 2018. 

Khan, Sanan H.; Sharma, Ankush P.; Kitey, Rajesh; Parameswaran, Venkitanarayanan, Effect of metal layer placement on the damage and energy absorption mechanisms in aluminium/glass fibre laminates, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol.119, 2018. 

Siddique, M. Hamid; Afzal, Arshad; Samad, Abdus, Design Optimization of the Centrifugal Pumps via Low Fidelity Models, MATHEMATICAL PROBLEMS IN ENGINEERING, Vol.2018, 2018. 

Kumar, P. Arun; Kumar, S. M. Aravindh; Mitra, A. Surya; Rathakrishnan, E., Fluidic injectors for supersonic jet control, PHYSICS OF FLUIDS, Vol.30, 2018. 

Agarwal, Avinash Kumar; Park, Sungwook; Dhar, Atul; Lee, Chang Sik; Park, Suhan; Gupta, Tarun; Gupta, Neeraj K., Review of Experimental and Computational Studies on Spray, Combustion, Performance, and Emission Characteristics of Biodiesel Fueled Engines, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 

Jithin, M.; Kumar, Nimish; De, Ashoke; Das, Malay K., Pore-Scale Simulation of Shear Thinning Fluid Flow Using Lattice Boltzmann Method, TRANSPORT IN POROUS MEDIA, Vol.121, 2018. 

Bhattacharjee, Arindam; Chatterjee, Anindya, Transverse impact of a Hertzian body with an infinitely long Euler-Bernoulli beam, JOURNAL OF SOUND AND VIBRATION, Vol.429, 2018. 

Afzal, Arshad; Ansari, Mubashshir A.; Kim, Kwang-Yong, Editorial for the Special Issue on Passive Micromixers, MICROMACHINES, Vol.9, 2018. 

Banerjee, A.; Calius, E. P.; Das, R., Impact based wideband nonlinear resonating metamaterial chain, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.103, 2018. 

Sharma, Vyom; Srivastava, Ishan; Tyagi, Aakash; Jain, V. K.; Ramkumar, J., Theoretical and Experimental Investigations into Wire Electrochemical Turning (Wire-ECTrg) Process Using Finite Element Method, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 

Kumar, Arun; Sudarkodi, V.; Parandekar, Priya V.; Sinha, Nishant K.; Prakash, Om; Nair, Nisanth N.; Basu, Sumit, Adhesion between a rutile surface and a polyimide: a coarse grained molecular dynamics study, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.26, 2018. 

Shinde, Sachin Y.; Arakeri, Jaywant H., Physics of unsteady thrust and flow generation by a flexible surface flapping in the absence of a free stream, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, Vol.474, 2018. 

Singh, Sachin; Sankar, Mamilla Ravi; Jain, V. K., Simulation and experimental investigations into abrasive flow nanofinishing of surgical stainless steel tubes, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 

Banerjee, Arnab; Calius, Emilio P.; Das, Raj, An impact based mass-in-mass unit as a building block of wideband nonlinear resonating metamaterial, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.101, 2018. 

Shete, Mihir H.; Guha, Anirban, Effect of free surface on submerged stratified shear instabilities, JOURNAL OF FLUID MECHANICS, Vol.843, 2018. 

Kumar, Rudra; Agrawal, Aman; Bhuvana, Thiruvelu; Sharma, Ashutosh, Porous indium oxide hollow spheres (PIOHS) for asymmetric electrochemical supercapacitor with excellent cycling stability, ELECTROCHIMICA ACTA, Vol.270, 2018. 

Kumar, Rudra; Bhuvana, Thiruvelu; Rai, Prabhakar; Sharma, Ashutosh, Highly Sensitive Non-Enzymatic Glucose Detection Using 3-D Ni-3(VO4)2) Nanosheet Arrays Directly Grown on Ni Foam, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 

Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Experimental investigations to enhance the machining performance of tungsten carbide tool insert using microwave treatment process, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.40, 2018. 

Kumar, Mahesh; Srivastava, S. C.; Singh, S. N.; Ramamoorty, M., Development of a new control strategy based on two revolving field theory for single-phase VCVSI integrated to DC microgrid, INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, Vol.98, 2018. 

Vardhaman, B. S. Ajay; Amarnath, M.; Ramkumar, J.; Rai, Prabhat K., Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.27, 2018. 

Panigrahi, Devi Prasad; Das, Sayan; Chakraborty, Suman, Deformation of a surfactant-laden viscoelastic droplet in a uniaxial extensional flow, PHYSICS OF FLUIDS, Vol.30, 2018. 

Gupta, Sunit K.; Wahi, Pankaj, Tuned dynamics stabilizes an idealized regenerative axial-torsional model of rotary drilling, JOURNAL OF SOUND AND VIBRATION, Vol.412, 2018. 

Nair, Dileep V.; Ghoshdastidar, P. S., A comparative study of 2-D and 3-D conjugate natural convection from a vertical rectangular fin array with multilayered base subjected to distributed high heat flux, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.121, 2018. 

Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Hydrodynamics of Two Interacting Liquid Droplets of Aqueous Solution inside a Microchannel, LANGMUIR, Vol.34, 2018. 

Pradhan, Tapan Kumar; Panigrahi, Pradipta Kumar, Convection inside condensing and evaporating droplets of aqueous solution, SOFT MATTER, Vol.14, 2018. 

Gautam, Ankit K.; Agarwal, Nishant K.; Panigrahi, Pradipta K., Jet breaker plate for suppressing gas entrainment and flow induced vibration of a CSRDM shroud tube assembly inside the control plug shell, NUCLEAR ENGINEERING AND DESIGN, Vol.340, 2018. 

Shukla, Rajesh Kumar; Patel, Virendra; Kumar, Arvind, Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation, JOURNAL OF THERMAL SPRAY TECHNOLOGY, Vol.27, 2018. 

Babu, Abhishek; Arora, H. S.; Behera, Sailesh N.; Sharma, Mukesh; Grewal, H. S., Towards highly durable bimodal composite claddings using microwave processing, SURFACE & COATINGS TECHNOLOGY, Vol.349, 2018. 

Khanna, Sourav; Newar, Sanjeev; Sharma, Vashi; Panigrahi, Pradipta Kumar; Mallick, Tapas K., Deformation of receiver in solar parabolic trough collector due to non uniform temperature and solar flux distribution and use of bimetallic absorber tube with multiple supports, ENERGY, Vol.165, 2018. 

Sankar, H. Ravi; Parameswaran, Venkitanarayanan, Effect of circular perforations on the progressive collapse of circular cylinders under axial impact, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol.122, 2018. 

Awasthi, Shikha; Pal, Vijay Kumar; Choudhury, S. K., Effect of surface modifications by abrasive water jet machining and electrophoretic deposition on tribological characterisation of Ti6Al4V alloy, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol.96, 2018. 

Sharma, Basant Lal, On linear waveguides of zigzag honeycomb lattice, WAVES IN RANDOM AND COMPLEX MEDIA, Vol.28, 2018. 

Khanna, Sourav; Sharma, Vashi; Newar, Sanjeev; Mallick, Tapas K.; Panigrahi, Pradipta Kumar, Thermal stress in bimetallic receiver of solar parabolic trough concentrator induced due to non uniform temperature and solar flux distribution, SOLAR ENERGY, Vol.176, 2018. 

Somwanshi, Praveen M.; Muralidhar, K.; Khandekar, Sameer, Dropwise condensation patterns of bismuth formed on horizontal and vertical surfaces, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol.122, 2018. 

Sudarkodi, V.; Sooraj, K.; Nair, Nisanth N.; Basu, Sumit; Parandekar, Priya V.; Sinha, Nishant K.; Prakash, Om; Tsotsis, Tom, Mechanical response of two polyimides through coarse-grained molecular dynamics simulations, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol.26, 2018. 

Shah, Ambuj; Kumar, Arvind; Ramkumar, J., Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.256, 2018. 

Anoop, K. V.; Singh, Om Pal, The build-up and characterization of nuclear burn-up wave in a fast neutron multiplying medium, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.43, 2018. 

Bhandari, Ajay; Bansal, Ankit; Singh, Anup; Sinha, Niraj, Numerical Study of Transport of Anticancer Drugs in Heterogeneous Vasculature of Human Brain Tumors Using Dynamic Contrast Enhanced-Magnetic Resonance Imaging, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol.140, 2018. 

Bhattacharya, Shashwat; Pandey, Ambrish; Kumar, Abhishek; Verma, Mahendra K., Complexity of viscous dissipation in turbulent thermal convection, PHYSICS OF FLUIDS, Vol.30, 2018. 

Kumar, Alok; Tiwari, Vipul; Kumar, Arvind, A Study of Solidification During Ice Slurry Generation in an Inclined Rectangular Cavity, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 

Sagar, S. M. V.; Agarwal, Avinash Kumar, Knocking behavior and emission characteristics of a port fuel injected hydrogen enriched compressed natural gas fueled spark ignition engine, APPLIED THERMAL ENGINEERING, Vol.141, 2018. 

Vasukiran, Mandava; Kishore, Nanda; Yadav, Shakti, Critical Reynolds numbers of shear-thinning fluids flow past unbounded spheres, POWDER TECHNOLOGY, Vol.339, 2018. 

Sengupta, Aditi; Ghoshdastidar, P. S., Heat Transfer Enhancement in Ferrofluids Flow in Micro and Macro Parallel Plate Channels: A Comparative Numerical Study, JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol.10, 2018. 

De, Souradip; Sahoo, Soumya Ranjan; Wahi, Pankaj, Trajectory Tracking Control with Heterogeneous Input Delay in Multi-Agent System, JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, Vol.92, 2018. 

Sampath, Ramesh; Nayaka, Hanumanthappa Shivananda; Gopi, Karekere Rangaraju; Sahu, Sandeep; Kuruveri, Udaya Bhat, Investigation of microstructure and mechanical properties of the Cu-3% Ti alloy processed by multiaxial cryo-forging, JOURNAL OF MATERIALS RESEARCH, Vol.33, 2018. 

Gupta, Prashant Kumar; Bhandari, Arihant; Bhattacharya, Jishnu; Pala, Raj Ganesh S., Correlating Voltage Profile to Molecular Transformations in Ramsdellite MnO2 and Its Implication for Polymorph Engineering of Lithium Ion Battery Cathodes, JOURNAL OF PHYSICAL CHEMISTRY C, Vol.122, 2018. 

Kumar, Sanjay; Bhushan, Pulak; Prakash, Om; Bhattacharya, Shantanu, Double negative acoustic metastructure for attenuation of acoustic emissions, APPLIED PHYSICS LETTERS, Vol.112, 2018. 

Singh, Sandeep Kumar; Akhtar, Mohammad Jaleel; Kar, Kamal K., Hierarchical Carbon Nanotube-Coated Carbon Fiber: Ultra Lightweight, Thin, and Highly Efficient Microwave Absorber, ACS APPLIED MATERIALS & INTERFACES, Vol.10, 2018. 

Patel, Divyansh Singh; Singh, Abhilasha; Balani, K.; Ramkumar, J., Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V, SURFACE & COATINGS TECHNOLOGY, Vol.349, 2018. 

Gautam, Ankit Kumar; Panigrahi, Pradipta Kumar; Velusamy, Karuppanna, Flow structures associated with CSRDM shroud tube and control rod assembly: A combined experimental and simulation study, PROGRESS IN NUCLEAR ENERGY, Vol.109, 2018. 

Nair, Vineet; Sharma, Ishan; Shankar, V, Planar equilibria of sessile and pendant liquid drops on geometrically non-linear elastic membranes, PHYSICS OF FLUIDS, Vol.30, 2018. 

Kumar, Rudra; Bhuvana, Thiruvelu; Sharma, Ashutosh, Tire Waste Derived Turbostratic Carbon as an Electrode for a Vanadium Redox Flow Battery, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol.6, 2018. 

Vardhaman, B. S. Ajay; Amarnath, M.; Jhodkar, Durwesh; Ramkumar, J.; Chelladurai, H.; Roy, M. K., Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation, JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol.40, 2018. 

Yadav, Surekha; Kumar, Arvind; Biswas, Krishanu, Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi), MATERIALS CHEMISTRY AND PHYSICS, Vol.210, 2018. 

Gupta, Prince, Controlling Level Splitting by Strong Coupling of Surface Plasmon Resonances with Rhodamine-6G on a Gold Grating (vol 13, pg 2067, 2018), PLASMONICS, Vol.13, 2018. 

Punati, V. S.; Sharma, I.; Wahi, P., Indentation of adhesive beams, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol.141, 2018. 

Gayner, Chhatrasal; Kar, Kamal K.; Kim, Woochul, Recent progress and futuristic development of PbSe thermoelectric materials and devices, MATERIALS TODAY ENERGY, Vol.9, 2018. 

Sen, Novonil; Gupta, Vinay K., On estimation of seismic damage from ductility and hysteretic energy demands in equivalent oscillators using linear response, ENGINEERING STRUCTURES, Vol.172, 2018. 

Dharmadhikari, Susheel; Chatterjee, Anindya, An engineering-design oriented exploration of human excellence in throwing, SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol.43, 2018. 

Sharma, Rahul Swarup; Singhal, Ishant; Gupta, Shivam, Innovative Training Framework for Additive Manufacturing Ecosystem to Accelerate Adoption of Three-Dimensional Printing Technologies, 3D PRINTING AND ADDITIVE MANUFACTURING, Vol.5, 2018. 

Neetu; Singh, Subhash; Rao, P. Nageshwar; Jayaganathan, R.; Midathada, A.; Verma, Kartikey; Ravella, Uday K., Elevated corrosion in strain hardened Al-Mg alloy, VACUUM, Vol.157, 2018. 

Bangari, Raghubeer Singh; Sahu, Sandeep; YadaV, Prabhat Chand, Comparative evaluation of hot corrosion resistance of nanostructured AlCrN and TiAlN coatings on cobalt-based superalloys, JOURNAL OF MATERIALS RESEARCH, Vol.33, 2018. 

Pandey, Aditi; Patel, Anup Kumar; Ariharan, S.; Kumar, Vikram; Sharma, Rajeev Kumar; Kanhed, Satish; Nigam, Vinod Kumar; Keshri, Anup; Agarwal, Arvind; Balani, Kantesh, Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating, NANOMATERIALS, Vol.8, 2018. 

Agarwal, Avinash Kumar; Singh, Akhilendra P.; Gupta, Tarun; Agarwal, Rashmi A.; Sharma, Nikhil; Rajput, Prashant; Pandey, Swaroop K.; Ateeq, Bushra, Mutagenicity and Cytotoxicity of Particulate Matter Emitted from Biodiesel-Fueled Engines, ENVIRONMENTAL SCIENCE & TECHNOLOGY, Vol.52, 2018. 

Nagdeve, Leeladhar; Jain, V. K.; Ramkumar, J., Differential finishing of freeform surfaces (knee joint) using R-MRAFF process and negative replica of workpiece as a fixture, MACHINING SCIENCE AND TECHNOLOGY, Vol.22, 2018. 

Jhodkar, Durwesh; Amarnath, M.; Chelladurai, H.; Ramkumar, J., Performance assessment of microwave treated WC insert while turning AISI 1040 steel, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol.32, 2018. 

Singh, Sandeep Kumar; Prakash, Hari; Akhtar, M. J.; Kar, Kamal K., Lightweight and High-Performance Microwave Absorbing Heteroatom-Doped Carbon Derived from Chicken Feather Fibers, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol.6, 2018. 

Yadav, Deepak Kumar; Gupta, Amitava; Munshi, Prabhat, Non linear Dynamic Inversion based controller design for load following operations in Pressurized Water Reactors with bounded Xenon oscillations, NUCLEAR ENGINEERING AND DESIGN, Vol.328, 2018. 

Sharma, Vyom; Patel, Divyansh Singh; Jain, V. K.; Ramkumar, J.; Tyagi, Akash, Wire Electrochemical Threading: A Technique for Fabricating Macro/Micro Thread Profiles, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, Vol.165, 2018. 

Orra, Kashfull; Choudhury, Sounak K., Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol.142, 2018. 

Gupta, Sunit K.; Wahi, Pankaj, Bifurcations in the axial-torsional state-dependent delay model of rotary drilling, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol.99, 2018. 

Khechai, A.; Tati, A.; Guerira, B.; Guettala, A.; Mohite, P. M., Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation, COMPOSITE STRUCTURES, Vol.185, 2018. 

Kishore, Rahul; Choudhury, Sounak K.; Orra, Kashfull, On-line control of machine tool vibration in turning operation using electro-magneto rheological damper, JOURNAL OF MANUFACTURING PROCESSES, Vol.31, 2018. 

Chouhan, Arvind; Aggarwal, Akash; Kumar, Arvind, Model Development in OpenFOAM for Laser Metal Deposition-based Additive Manufacturing Process, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol.71, 2018. 

Gupta, Gaurav; Dutta, Ashish, Trajectory generation and step planning of a 12 DoF biped robot on uneven surface, ROBOTICA, Vol.36, 2018. 

Khatik, Vitthal M.; Nandi, Arup Kr., A generic method for rock mass classification, JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, Vol.10, 2018. 

Prakash, Chander; Singh, Sunpreet; Verma, Kartikey; Sidhu, Sarabjeet S.; Singh, Subhash, Synthesis and characterization of Mg-Zn-Mn-HA composite by spark plasma sintering process for orthopedic applications, VACUUM, Vol.155, 2018. 

Agarwal, Avinash K.; Ateeq, Bushra; Gupta, Tarun; Singh, Akhilendra P.; Pandey, Swaroop K.; Sharma, Nikhil; Agarwal, Rashmi A.; Gupta, Neeraj K.; Sharma, Hemant; Jain, Ayush; Shukla, Pravesh C., Toxicity and mutagenicity of exhaust from compressed natural gas: Could this be a clean solution for megacities with mixed-traffic conditions?, ENVIRONMENTAL POLLUTION, Vol.239, 2018. 

Verma, Dinkar; Paul, Subhanker; Wahi, Pankaj, Stability and Bifurcation Characteristics of a Forced Circulation BWR Using a Nuclear-Coupled Homogeneous Thermal-Hydraulic Model, NUCLEAR SCIENCE AND ENGINEERING, Vol.190, 2018. 

Jhodkar, Durwesh; Chelladurai, H.; Choudhary, Akhilesh Kumar; Ramkumar, J., Comparison of machining performance of microwave post-heated WC insert with dry, wet and MQL cutting in turning operation, JOURNAL OF MICROWAVE POWER AND ELECTROMAGNETIC ENERGY, Vol.52, 2018. 

Shukla, Pragya; Awasthi, Shikha; Ramkumar, Janakarajan; Balani, Kantesh, Protective trivalent Cr-based electrochemical coatings for gun barrels, JOURNAL OF ALLOYS AND COMPOUNDS, Vol.768, 2018. 

Kumar, Hitendra; Ramkumar, J.; Venkatesh, K. S., Surface texture evaluation using 3D reconstruction from images by parametric anisotropic BRDF, MEASUREMENT, Vol.125, 2018. 

Singh, Akhilendra Pratap; Agarwal, Avinash Kumar, Evaluation of Fuel Injection Strategies for Biodiesel-Fueled CRDI Engine Development and Particulate Studies, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol.140, 2018. 

Bhardwaj, Divyanshu; Guha, Anirban, Nonlinear modeling of stratified shear instabilities, wave breaking, and wave-topography interactions using vortex method, PHYSICS OF FLUIDS, Vol.30, 2018. 

Malik, Iram; Banerjee, Soma; Gayner, Chhatrasal; Chowdhuri, Abhijnan; Kar, Kamal K., Synthesis and thermoelectric performance of titanium diboride and its composites with lead selenide and carbon, CERAMICS INTERNATIONAL, Vol.44, 2018. 

Babu, R.; Das, Malay K., Effects of surface-active agents on bubble growth and detachment from submerged orifice, CHEMICAL ENGINEERING SCIENCE, Vol.179, 2018. 

Verma, M. K.; Kumar, A.; Kumar, P.; Barman, S.; Chatterjee, A. G.; Samtaney, R.; Stepanov, R. A., Energy Spectra and Fluxes in Dissipation Range of Turbulent and Laminar Flows, FLUID DYNAMICS, Vol.53, 2018. 

Kumar, Sanjay; Bhushan, Pulak; Krishna, Vinay; Bhattacharya, Shantanu, Tapered lateral flow immunoassay based point-of-care diagnostic device for ultrasensitive colorimetric detection of dengue NS1, BIOMICROFLUIDICS, Vol.12, 2018. 

Dehadrai, Abhinav Ravindra; Sharma, Ishan; Gupta, Shakti S., Stability of Vertically Traveling, Pre-tensioned, Heavy Cables, JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, Vol.13, 2018. 

Sharma, Shashank; Mandal, Vijay; Ramakrishna, S. A.; Ramkumar, J., Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.262, 2018. 

Kumar, Prem; Wangaskar, Bhimashankar; Khandekar, Sameer; Balani, Kantesh, Thermal-fluidic transport characteristics of bi-porous wicks for potential loop heat pipe systems, EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol.94, 2018. 

Vashishtha, Sumit; Verma, Mahendra K.; Samuel, Roshan, Large-eddy simulations of turbulent thermal convection using renormalized viscosity and thermal diffusivity, PHYSICAL REVIEW E, Vol.98, 2018. 

Gupta, Akash; Nadkarni-Ghosh, Sharvari; Sharma, Ishan, Rings of non-spherical, axisymmetric bodies, ICARUS, Vol. 299, 2018. 

Singh, M. K.; Venkatesh, K. S.; Dutta, A., View planning method for complete 3D digitisation of the scene, ELECTRONICS LETTERS, Vol. 54, 2018. 

Sengupta, Aditi; Suman, V. K.; Sengupta, Tapan K.; Bhaumik, Swagata, An enstrophy-based linear and nonlinear receptivity theory, PHYSICS OF FLUIDS, Vol. 30, 2018. 

Singh, Sandeep Kumar; Azad, Prakrati; Akhtar, M. J.; Kar, Kamal K., Improved Methanol Detection Using Carbon Nanotube-Coated Carbon Fibers Integrated with a Split-Ring Resonator-Based Microwave Sensor, ACS APPLIED NANO MATERIALS, Vol. 1, 2018. 

Gupta, Ankur; Bhattacharya, Shantanu, On the growth mechanism of ZnO nano structure via aqueous chemical synthesis, APPLIED NANOSCIENCE, Vol. 8, 2018. 

Heifetz, Eyal; Guha, Anirban, A generalized action-angle representation of wave interaction in stratified shear flows, JOURNAL OF FLUID MECHANICS, Vol. 834, 2018. 

Ramasamy, Navin Subbaiah; Kumar, Prem; Wangaskar, Bhimashankar; Khandekar, Sameer; Maydanik, Yuri F., Miniature ammonia loop heat pipe for terrestrial applications: Experiments and modeling, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 124, 2018. 

Shirsath, Ganesh Bapu; Pala, Raj Ganesh S.; Muralidhar, K.; Khandekar, Sameer, Effect of salinity and water depth on the performance of doubly inclined solar still, DESALINATION AND WATER TREATMENT, Vol. 124, 2018. 

Mittal, Sanjay; Tezduyar, Tayfun E., Comment on Experimental investigation of Taylor vortex photocatalytic reactor for water purification, CHEMICAL ENGINEERING SCIENCE, Vol. 192, 2018. 

Ranjan, Prabhat; Balasubramaniam, R.; Jain, V. K., Investigations into the mechanism of material removal and surface modification at atomic scale on stainless steel using molecular dynamics simulation, PHILOSOPHICAL MAGAZINE, Vol. 98, 2018. 

Venkatesan, Sudarkodi; Vivek-Ananth, R. P.; Sreejith, R. P.; Mangalapandi, Pattulingam; Hassanali, Ali A.; Samal, Areejit, Network approach towards understanding the crazing in glassy amorphous polymers, JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT, Vol., 2018. 

Ashari, S. Esna; Das, A.; Buscarnera, G., Model-Based Assessment of the Effect of Surface Area Growth on the Permeability of Granular Rocks, JOURNAL OF ENGINEERING MECHANICS, Vol.144, 2018. 

Murkute, Pratik; Kumar, Ravi; Choudhary, S.; Maharana, H. S.; Ramkumar, J.; Mondal, K., Comparative Atmospheric Corrosion Behavior of a Mild Steel and an Interstitial Free Steel, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, 2018. 

Benjwal, Poonam; De, Bibekananda; Kar, Kamal K., 1-D and 2-D morphology of metal cation co-doped (Zn, Mn) TiO2 and investigation of their photocatalytic activity, APPLIED SURFACE SCIENCE, Vol. 427, 2018. 

Maiti, Soumyabrata; Bandyopadhyay, Ritwik; Chatterjee, Anindya, Vibrations of an Euler-Bernoulli beam with hysteretic damping arising from dispersed frictional microcracks, JOURNAL OF SOUND AND VIBRATION, Vol. 412, 2018. 

Banerjee, Soma; Benjwal, Poonam; Singh, Milan; Kar, Kamal K., Graphene oxide (rGO)-metal oxide (TiO2/Fe3O4) based nanocomposites for the removal of methylene blue, APPLIED SURFACE SCIENCE, Vol. 439, 2018. 

Chatterjee, Anando G.; Verma, Mahendra K.; Kumar, Abhishek; Samtaney, Ravi; Hadri, Bilel; Khurram, Rooh, Scaling of a Fast Fourier Transform and a pseudo-spectral fluid solver up to 196608 cores, JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING, Vol. 113, 2018. 

Maharana, H. S.; Bishoyi, B.; Panda, S.; Basu, A., Electron Backscattered Diffraction Study of Pulse Electrodeposited Cu-Y2O3 Composite Coating, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, 2018. 

Yadav, Surekha; Sarkar, S.; Aggarwal, Akash; Kumar, Arvind; Biswas, Krishanu, Wear and mechanical properties of novel (CuCrFeTiZn)(100-x)Pb-x high entropy alloy composite via mechanical alloying and spark plasma sintering, WEAR, Vol. 410, 2018. 

Chamoli, Pankaj; Das, Malay K.; Kar, Kamal K., Urea-assisted low temperature green synthesis of graphene nanosheets for transparent conducting film, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol. 113, 2018. 

Pal, Ranu; Akhtar, M. J.; Kar, Kamal K., Study on dielectric properties of synthesized exfoliated graphite reinforced epoxy composites for microwave processing, POLYMER TESTING, Vol. 70, 2018. 

Nellippallil, Anand Balu; Rangaraj, Vignesh; Gautham, B. P.; Singh, Amarendra Kumar; Allen, Janet K.; Mistree, Farrokh, An Inverse, Decision-Based Design Method for Integrated Design Exploration of Materials, Products, and Manufacturing Processes, JOURNAL OF MECHANICAL DESIGN, Vol. 140, 2018. 

Kumar, Ravindra; Kar, Kamal K.; Kumar, Vijai, Studies on the effect of compatibilizers on mechanical, thermal and flow properties of polycarbonate/poly (butylene terephthalate) blends, MATERIALS RESEARCH EXPRESS, Vol. 5, 2018. 

Pal, Ranu; Akhtar, M. J.; Kar, Kamal K., Microwave-Assisted Curing of Silicon Carbide-Reinforced Epoxy Composites: Role of Dielectric Properties, JOM, Vol. 70, 2018. 

Mishra, Raghvendra Kumar; Ha, Sung Kyu; Verma, Kartikey; Tiwari, Santosh K., Recent progress in selected bio-nanomaterials and their engineering applications: An overview, JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES, Vol. 3, 2018. 

Sharma, Pushpender; Sengupta, Tapan K.; Bhaumik, Swagata, Three-dimensional transition of zero-pressure-gradient boundary layer by impulsively and nonimpulsively started harmonic wall excitation, PHYSICAL REVIEW E, Vol. 98, 2018. 

Jha, Kanishka; Kumar, Ravinder; Verma, Kartikey; Chaudhary, Babulal; Tyagi, Y. K.; Singh, Subhash, Application of modified TOPSIS technique in deciding optimal combination for bio-degradable composite, VACUUM, Vol. 157, 2018. 

Yadav, Amit K.; Banerjee, Soma; Kumar, Ravindra; Kar, Kamal K.; Ramkumar, J.; Dasgupta, Kinshuk, Mechanical Analysis of Nickel Particle-Coated Carbon Fiber-Reinforced Epoxy Composites for Advanced Structural Applications, ACS APPLIED NANO MATERIALS, Vol. 1, 2018. 

Kumar, Ravindra; Kar, Kamal K.; Dasgupta, Kinshuk, Static and dynamic mechanical analysis of graphite flake filled phenolic-carbon fabric composites and their correlation with interfacial interaction parameters, POLYMER ENGINEERING AND SCIENCE, Vol. 58, 2018. 

Karthik, P. B.; Sardhara, Jayesh; Tiwari, Nachiketa; Behari, Sanjay, A device for three-dimensional quantitative assessment and alignment of C1-2 vertebrae during posterior distraction and fusion technique for atlantoaxial dislocation and/or basilar invagination, NEUROLOGY INDIA, Vol. 66, 2018. 

Ansari, Mohammed Istafaul Haque; Qurashi, Ahsanulhaq; Nazeeruddin, Mohammad Khaja, Frontiers, opportunities, and challenges in perovskite solar cells: A critical review, JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS, Vol. 35, 2018. 

Sundaram, Prasannabalaji; Sengupta, Tapan K.; Bhaumik, Swagata, The three-dimensional impulse response of a boundary layer to different types of wall excitation, PHYSICS OF FLUIDS, Vol. 30, 2018. 

Prasad, Jitendra; Goswami, Avijit; Kumbhani, Brijesh; Mishra, Chittaranjan; Tyagi, Himanshu; Jun, Jung Hyun; Choudhary, Kamal Kumar; Kumar, Mukesh; James, Naveen; Reddy, V. Ravi Shankar; Singh, Satwinder Jit; Kashyap, Deepak; Sohoni, Milind; DasGupta, Nandita; Raina, Prabhu Krishna; Saha, Samir Kumar; Mittal, Sanjay; Chakraborty, Suman; Das, Sarit Kumar, Engineering curriculum development based on education theories, CURRENT SCIENCE, Vol. 114, 2018. 

Wu, Jian; Zhang, Chuanbing; Su, Benlong; Dong, Jiyi; Wang, Youshan; Gond, Bipin Kumar, New method for studying the macro-micro contact properties between smooth metal and silicone rubber, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 96, 2018. 

Chamoli, Pankaj; Singh, Sandeep Kumar; Akhtar, M. J.; Das, Malay K.; Kar, Kamal K., Nitrogen doped graphene nanosheet-epoxy nanocomposite for excellent microwave absorption, PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, Vol. 103, 2018. 

Shukla, Pravesh Chandra; Gupta, Tarun; Agarwal, Avinash Kumar, Performance evaluation of a biodiesel fuelled transportation engine retrofitted with a non-noble metal catalysed diesel oxidation catalyst for controlling unregulated emissions, JOURNAL OF HAZARDOUS MATERIALS, Vol. 344, 2018. 

Surthi, Kiran Kumar; De, Bibekananda; Ramkumar, J.; Kar, Kamal K., Enhancement of the surface reactivity of zigzag boron nitride nanoribbons by chlorine gas decoration: A computational study, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, Vol. 120, 2018. 

Kumar, Ravindra; Varshney, Suyash; Kar, Kamal K.; Dasgupta, Kinshuk, Enhanced thermo-mechanical and electrical properties of carbon-carbon composites using human hair derived carbon powder as reinforcing filler, ADVANCED POWDER TECHNOLOGY, Vol. 29, 2018. 

Prakash, Chander; Singh, Sunpreet; Singh, Manjeet; Verma, Kartikey; Chaudhary, Babulal; Singh, Subhash, Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy, VACUUM, Vol. 158, 2018. 

Bandyopadhyay, Ritwik; Maiti, Soumyabrata; Ghosh, Aparna (Dey); Chatterjee, Anindya, Overhead water tank shapes with depth-independent sloshing frequencies for use as TLDs in buildings, STRUCTURAL CONTROL & HEALTH MONITORING, Vol. 25, 2018. 

Singh, Amandeep; Philip, Deepu; Ramkumar, J.; Das, Mainak, A simulation based approach to realize green factory from unit green manufacturing processes, JOURNAL OF CLEANER PRODUCTION, Vol. 182, 2018. 

Sapkale, Swapnil L.; Sucheendran, Mahesh M.; Gupta, Shakti S.; Kanade, Shantanu V., Vibroacoustic study of a point-constrained plate mounted in a duct, JOURNAL OF SOUND AND VIBRATION, Vol. 420, 2018. 

Singh, Anamika; Asikainen, Sanja; Teotia, Arun K.; Shiekh, Parvaiz A.; Huotilainen, Eero; Qayoom, Irfan; Partanen, Jouni; Seppala, Jukka; Kumar, Ashok, Biomimetic Photocurable Three-Dimensional Printed Nerve Guidance Channels with Aligned Cryomatrix Lumen for Peripheral Nerve Regeneration, ACS APPLIED MATERIALS & INTERFACES, Vol. 10, 2018. 

Kumar, Rajesh; da Silva, Everson T. S. G.; Singh, Rajesh K.; Savu, Raluca; Alaferdov, Andrei V.; Fonseca, Leandro C.; Carossi, Lory C.; Singh, Arvind; Khandka, Sarita; Kar, Kamal K.; Alves, Oswaldo L.; Kubota, Lauro T.; Moshkalev, Stanislav A., Microwave-assisted synthesis of palladium nanoparticles intercalated nitrogen doped reduced graphene oxide and their electrocatalytic activity for direct-ethanol fuel cells, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Vol. 515, 2018. 

Bessonov, Nikolai; Reinberg, Natalia; Banerjee, Malay; Volpert, Vitaly, The Origin of Species by Means of Mathematical Modelling, ACTA BIOTHEORETICA, Vol. 66, 2018. 

Nowakowski, Tomasz J.; Rani, Neha; Golkaram, Mahdi; Zhou, Hongjun R.; Alvarado, Beatriz; Huch, Kylie; West, Jay A.; Leyrat, Anne; Pollen, Alex A.; Kriegstein, Arnold R.; Petzold, Linda R.; Kosik, Kenneth S., Regulation of cell-type-specific transcriptomes by microRNA networks during human brain development, NATURE NEUROSCIENCE, Vol. 21, 2018. 

Carpenter, J. R., Guha, A. and Heifetz, E., A physical interpretation of the wind-wave instability as interacting waves. Journal of Physical Oceanography , 47, pp. 1441–1455, (2017).

Guha, A.  and Udwadia, F. E., Non-linear dynamics induced by linear wave interactions in multi-layered flows. Journal of Fluid Mechanics, 816, pp. 412-427, (2017).

Mandal, A. K.,  and  Wahi, P., Mode-locking and improved harmonicity for real strings vibrating in the presence of a curved obstacle. Nonlinear Dynamics, pp. 2203-2224, (2017).

Das, S., and Wahi, P., Approximations for period-1 rotation of vertically and horizontally excited parametric pendulum. Nonlinear Dynamics, 88(3), pp. 2171-2201, (2017).

Kumar, A., Das, S. L., and Wahi, P., Effect of radial loads on the natural frequencies of thin-walled circular cylindrical shells. International Journal of Mechanical Sciences, 122, pp. 37-52, (2017).

Silveira, M., Wahi, P., and Fernandes, J. C. M., Effects of asymmetrical damping on a 2 DOF quarter-car model under harmonic excitation. Communications in Nonlinear Science and Numerical Simulation, 43, pp. 14-24, (2017).

Singh, H., and Wahi, P., Non-planar vibrations of a string in the presence of a boundary obstacle. Journal of Sound and Vibration, 389, pp. 326-349, (2017).

Verma, D., Kalra, M. S., and Wahi, P., Effect of nonlinear void reactivity on bifurcation characteristics of a lumped-parameter model of a BWR: A study relevant to RBMK. Nuclear Engineering and Design, 315, pp. 179-193, (2017).

Singh, H., and Wahi, P., Role of curvatures in determining the characteristics of a string vibrating against a doubly curved obstacle. Journal of Sound and Vibration, 402, pp. 1-13, (2017).

Kumar, R., and Wahi, P., Dynamo transition in a five-mode helical model. Physics of Plasma, 24, 092305, (2017).

Verma, D., Kalra, M. S., and Wahi, P., A comparative study of bifurcation characteristics in single and two-zone fuel models of a BWR: A case study of the advanced heavy water reactor (AHWR). Nuclear Engineering and Design, 324(1), pp. 158-170, (2017).

Sarkar, S., Wahi, P., and Munshi, P., Dual scan CT image recovery from truncated projections. Review of Scientific Instruments, 88(12), 123704, (2017).

Nagdeve, L., Jain, V. K. and Ramkumar, J., Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture. The International Journal of Advanced Manufacturing Technology, pp. 1-12, (2017).

Kajal, S., Jain, V. K. and Ramkumar, J. and Nagdeve, L., Experimental and theoretical investigations into internal magnetic abrasive finishing of a revolver barrel. The International Journal of Advanced Manufacturing Technology, pp. 1-18, (2017).

Nagdeve, L., Sidpara, A., Jain, V. K. and Ramkumar, J., On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process. Machining Science and Technology, pp. 1-14, (2017).

Patel, D. S., Singh, A., Jain, V. K., Ramkumar, J. and Shrivastava, A., Investigations into insertion force of electrochemically micro-textured hypodermic needles. The International Journal of Advanced Manufacturing Technology, pp. 1-16, (2017).

Murkute, P., Choudhary, S., Ramkumar, J. and Mondal, K., Effect of Exposure Face Orientation and Tilt Angle on Immersion Corrosion Behavior of Dual-Phase and Mild Steels. Journal of Materials Engineering and Performance, 26, pp. 151- 160, (2017).

Parameswari, G., Jain, V. K., Ramkumar, J. and Nagdeve, L., Experimental investigations into nanofinishing of Ti6Al4V flat disc using magnetorheological finishing process. The International Journal of Advanced Manufacturing Technology, pp. 1-11, (2017).

Tyagi, A., Sharma, V., Jain, V. K. and Ramkumar, J., Investigations into side gap in wire electrochemical micromachining (wire-ECMM). The International Journal of Advanced Manufacturing Technology, pp. 1-10, (2017).

Sheokand, H.,  Ghosh, S., Singh, G., Saikia, M., Srivastava, K. V.,  Ramkumar, J., and Ramakrishna, A. S., Transparent broadband metamaterial absorber based on resistive films. Journal of Applied Physics, 122, pp. 1-8, (2017).

Penke, Y. K., Anantharaman, G.,  Ramkumar, J. and Kar, K. K., Aluminum Substituted Cobalt Ferrite (Co−Al−Fe) Nano Adsorbent for Arsenic Adsorption in Aqueous Systems and Detailed Redox Behavior Study with XPS. ACS Applied Materials & Interfaces, 9 (13), pp 11587–11598, (2017).

Ankit Kumar Gautam, Sunil Niranjan and Pradipta Kumar Panigrahi, Hydrodynamics Around a Shroud Tube Assembly of a Fast Breeder Reactor, Nuclear Engineering and Design, Vol. 324, pp. 297-314, (2017).

Tapan Kumar Pradhan and Pradipta Kumar Panigrahi, Evaporation induced natural convection inside a droplet of aqueous solution placed on a superhydrophobic surface, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 530, pp. 1-12, (2017).

Mohammed Asfer, S. K. Saroj and Pradipta Kumar Panigrahi, Retention of ferrofluid aggregate at the target site during Magnetic Drug Targeting, Journal of Magnetism and Magnetic Materials, Vol. 436, pp. 47-56, (2017).

Bal Krishna Mishra, Pradipta Kumar Panigrahi, Formation and characterization of the vortices generated by a DBD plasma actuator in burst mode, Physics of Fluids, Vol. 29, pp. 24104(1-17), (2017).

Sharma B. L., On scattering of waves on square lattice half-plane with mixed boundary condition, Zeitschrift für angewandte Mathematik und Physik, Volume 68(5):120, Pages 1-24, (2017).

Sharma B. L., On linear waveguides of square and triangular lattice strips: an application of Chebyshev polynomials”, Sadhana, Volume 42(6), Pages 901-927, (2017).

Sharma B. L., Continuum limit of the discrete Sommerfeld problems on square lattice”, Sadhana, Volume 42(5), Pages 713-728, (2017).

Sharma B. L., On linear waveguides of zigzag honeycomb lattice strips”, Waves in Random and Complex Media, Volume 28(1), Pages 1-43, (2017).

Mahapatra, A. and Ghoshdastidar, P. S., “A Computational Study of Mixed Convection Heat Transfer from a Continuously Moving Isothermal Vertical Plate to Alumina-Water Nanofluid as in Hot Extrusion”, ASME Journal of Manufacturing Science and Engineering, Vol. 139, p.114501, (2017).

Agrawal, A. and Ghoshdastidar, P. S., “Numerical Simulation of Heat Transfer during Production of Rutile Titanium Dioxide in a Rotary Kiln”, International Journal of Heat and Mass Transfer, Vol. 106, pp. 263-279, (2017).

K. Rathore, S. Bhattacharjee, P. Munshi, Characterization of microwave plasma in a multicusp using 2D emission based tomography: Bessel modes and wave absorption, Physics of Plasmas, 24, Article 063503, (2017).

S. P. Saraswat, P. Munshi, A. Khanna, C. Allison, Ex-Vessel Loss of Coolant Accident Analysis of ITER Divertor Cooling System Using Modified RELAP/ SCADAPSIM / Mod4.0, ASME Journal of Nuclear Engineering and Radiation Science, 3, pp. 041009/1-041009/13, (2017).

Sarkar, S. and Ranakoti, G., Effect of vortex generators on film cooling effectiveness, Journal of Turbomachinery, Transactions of ASME, 139 (6), 061009, (2017).

Anand, K. and Sarkar, S., Features of a Laminar Separated Boundary Layer near the Leading-edge of a model aerofoil for different Angles of Attack: An Experimental Study, Journal of Fluids Engineering, Transactions of ASME, 139 (2), 021201, (2017).

Nair, K. M. and Sarkar, S., LES of Self-Sustained Cavity Oscillation for Subsonic and Supersonic Flows, Journal of Fluids Engineering, Transactions of ASME, 139 (1), 011102, (2017).

Saha, P., Biswas, G., Mandal, A.C. and Sarkar, S., Investigation of coherent structures in a turbulent channel with built-in longitudinal vortex generators, International Journal of Heat and Mass Transfer, 104, pp. 178-198, (2017).

Nair, K. M., Sarkar, S. and Labana, Z., Self-sustained oscillation for a three dimensional transonic cavity using LES, Lecture Notes in Mechanical Engineering, Part F8, pp. 659-668, (2017).

Roychowdhury, A. and Gupta, A., Material homogeneity and strain compatibility in thin elastic shells. Mathematics and Mechanics of Solids, 22, pp. 1619-1635, (2017).

Roychowdhury, A. and Gupta, A., Non-metric connection and metric anomalies in materially uniform elastic solids. Journal of Elasticity, 126, pp. 1-26, (2017).

Tiwari, S. and Gupta, A., Effects of Air Loading on the Acoustics of an Indian Musical Drum. Journal of the Acoustical Society of America, 141, pp. 2611-2621, (2017).

Basak, A. and Gupta, A., Influence of a mobile incoherent interface on the strain-gradient plasticity of a thin slab. International Journal of Solids and Structures, 108, pp. 126-138, (2017).

Mukherjee, M., Gupta, A. and Prashant, A., Instability analysis of sand under undrained biaxial loading with rigid and flexible boundary. ASCE Journal of Geomechanics, 17, 04016042, (2017).

Kalra, S., Bhattacharya, B., and Munjal, B. S., Design of shape memory alloy actuated intelligent parabolic antenna for space applications, Smart Materials and Structures, 26(9), pp. 095015(1-14), (2017).

Jaipurkara, T., Kanta, P., Khandekar, S., Bhattacharya, B. and Paralikarb S., Thermo-mechanical design and characterization of flexible heat pipes, Applied Thermal Engineering, 126, pp.1199-1208, (2017).

Kuponu, O.S., Kadirkamanathan, V., Bhattacharya, B., and Pope, S.A., Integrated sensing, monitoring and healing of composite systems, Advances in Science and Technology, 101, pp. 62-68, (2017).

Pandey, A., Datta, R., Bhattacharya, B., Topology optimization of compliant structures and mechanisms using constructive solid geometry for 2-d and 3-d applications, Soft Computing, 21(5), pp. 1157–1179, (2017).

Hwang, J., Bae, C., Patel, C., Agarwal, R.A., Gupta, T. and Agarwal, A.K., Investigations on Air-Fuel Mixing and Flame Characteristics of Biodiesel Fuels for Diesel Engine Application. Applied Energy, 206, pp. 1203-1213, (2017).

Agarwal, A.K., Gadekar, S., Singh, A.P., In-Cylinder Air Flow Characteristics of different Intake Port Geometries using Tomographic PIV. Physics of Fluids, 29(9), pp. 095104(1-16), (2017).

Agarwal, A.K., Gadekar, S., Singh, A.P., In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine. ASME Journal of Energy Resources Technology, 140(1), pp. 012207-012207-10, (2017).

Singh, A.P., Jain, A., Agarwal, A.K., Fuel-Injection Strategy for PCCI Engine Fueled by Mineral Diesel and Biodiesel Blends. Energy and Fuels, 31 (8), pp. 8594–8607, (2017).

Shukla, P.C., Gupta, T., Gupta, N., Agarwal, A.K., A Qualitative Correlation between Engine Exhaust Particulate Number and Mass Emissions. FUEL, 202, pp. 241-245, (2017).

Singh, A.P., Pal, A., Gupta, N.K., Agarwal, A.K., Particulate Emissions from Laser Ignited and Spark Ignited Hydrogen Fueled Engines. International Journal of Hydrogen Energy, 42(24), pp. 15956-15965, (2017).

Agarwal, A.K., Singh, A.P., Pal, A., Effect of Laser Parameters and Compression Ratio on Particulate Emissions from a Laser Ignited Hydrogen Engine. International Journal of Hydrogen Energy, 42(15), pp. 10622-10635, (2017).

Sagar, SMV., Agarwal, A.K., Experimental Investigation of Varying Composition of HCNG on Performance and Combustion Characteristics of a SI Engine. International Journal of Hydrogen Energy, 42(18), pp. 13234-13244, (2017).

Sharma, N., Agarwal, A.K., Effect of Fuel Injection Pressure on Particulate Emissions from a Gasohol (E15 & M15) Fuelled Gasoline Direct Injection Engine. Energy and Fuels, 31 (4), pp. 4155–4164, (2017).

Singh, A.P., Agarwal, A.K., Partially Homogeneous Charge Compression Ignition (PHCCI) Engine Development for Low Volatility Fuels. Energy and Fuels, 31 (3), pp. 3164–3181, (2017).

Agarwal, A.K., Maurya, R.K., Singh, A.P., Evolution, Challenges and Path Forward for Low Temperature Combustion Engines. Progress in Energy and Combustion Science, 61, pp. 1-56(2017).

Agarwal, A.K., Gupta, J., Dhar, A., Potential and Challenges for Large Scale Application of Biodiesel in Automotive Sector. Progress in Energy and Combustion Science, 61, pp. 113-149(2017).

Jain, A., Singh, A.P., Agarwal, A.K., Effect of Split Fuel Injection and EGR on NOx and PM Emission Reduction in a Low Temperature Combustion (LTC) Mode Diesel Engine. Energy, 122, pp. 249-264, (2017).

Jain, A., Singh, A.P., Agarwal, A.K., Effect of Fuel Injection Parameters on Combustion Stability and Emissions of a Mineral Diesel Fueled Partially Premixed Charge Compression Ignition (PCCI) Engine. Applied Energy, 190, pp. 658-669, (2017).

Prasad, R.K., Jain, S., Verma, G., Agarwal*, A.K., Laser Ignition and Flame kernel Characterization of HCNG in a constant volume combustion chamber. Fuel, 190, pp. 318-327, (2017).

Lee, S., Lee, C.S., Park, S., Gupta, J.G., Maurya, R.K., Agarwal, A.K., Spray Characteristics, Engine Performance and Emission Analysis of Karanja Biodiesel and Its Diesel Fuel Blends. Energy, 119, pp. 138-151, (2017).

Jiotode, Y., Agarwal, A.K., Endoscopic Combustion Characterization of Jatropha Biodiesel in a Compression Ignition Engine. Energy, 119, pp. 845-851, (2017).

Shukla, P.C., Gupta, T., Khobragade, R., Labhsetwar, N.K., Gupta, N., and Agarwal, A.K., Effectiveness of non-noble metal based diesel oxidation catalysts on particle number emissions for diesel and biodiesel (B20) exhaust. Science of Total Environment, 574, pp. 1512-1520, (2017).

Shukla, P.C., Gupta, T., Labhsetwar, N.K., and Agarwal, A.K., Trace Metals and Ions in Particulates Emitted by Biodiesel Fuelled Engine. Fuel, 188, pp. 603-609, (2017).

Kumar, V., Sinha, S.K., Agarwal, A.K., Tribological Studies of Epoxy Composites with Solid and Liquid Fillers. Tribology International, 105, pp. 27-36, (2017).

Gautam, S.S. and Dixit, P.M., Simulation of Large Deformation Elasto-plastic Impact Problems using Two Different Objective Stress Measures. Procedia Engineering, 173, pp. 432-439, (2017).

Bhandari A. and Bhattacharya J., Manganese Dissolution from Spinel Cathode: Few Unanswered Questions. Journal of The Electrochemical Society , 164(2), pp. A106-A127, (2017).

Bhattacharjee A and Chatterjee A., Interplay between dissipation and modal truncation in ball-beam impact, ASME Journal of Computational and Nonlinear Dynamics 12 (6), 061018, (2017).

Kanchwala H and Chatterjee A., A generalized quarter car modelling approach with frame flexibility and other nonlocal effects. Sādhanā 42 (7), 1175-1192, (2017).

Sundriyal P. and Bhattacharya S., Inkjet printed graphene/ MnO2 super-capacitors on flexible substrates, ACS applied materials and interfaces, 9 (44), 38507–38521, (2017).

Patel V.K. and Bhattacharya S., Solid state green synthesis and catalytic activity of CuO nanorods in thermal decomposition of potassium periodate, Material Research Express, 4(9), (2017).

Kumar S., Bhushan P., Bhattacharya S., Facile Synthesis of Au@Ag-Hemin Decorated Reduced Graphene Oxide Sheets: A Novel Peroxidase Mimetic for Ultrasensitive Colorimetric Detection of Hydrogen Peroxide and Glucose, RSC Advances, 7, 37568, (2017).

Bhatt G., Kant R., Yadav K., Mishra K., Singh D., Gurunath R., Bhattacharya S., Impact of surface roughness on Dielectrophoretically assisted concentration of microorganisms over PCB based platforms, Biomedical Microdevices, 28, doi: 10.1007/s10544-017-0172-5, (2017).

Singh P., Rai A., Gupta A., Bhattacharya S. , Enhanced Photocatalytic performance of vertically grown ZnO nanorods with doping of noble metal (Al, Ag, Au, and Au-Pd) nanoparticles for degradation of industrial dye, Material Research Express, 4(5), 055004, (2017).

Singh P. and Bhattacharya S., Vanadium Pentoxide Nanostructures for Sensitive Detection of Hydrogen Gas at Room Temperature, Journal of Energy, Environment and Sustainability, 2, 69-74, (2017).

Singh P. and Bhattacharya S., Highly sensitive V2O5.1.6H2O nanostructures for sensing of Helium gas at room temperature, Material Letters, (2017).

Sundriyal P. and Bhattacharya S., Polyaniline- Silver nanoparticle- coffee waste extracted porous graphene nanocomposite structures as novel supercapacitor materials, Material Research Express, 43(03), 035501, (2017).

Singh S.K., Yadav M.K., Khandekar S., Measurement issues associated with surface mounting of thermopile heat flux sensors,   Applied Thermal Engineering, Vol. 114, 1105-1113, (2017).

Saraswat A., Bhattacharjee R., Verma A., Das M.K., Khandekar S., Investigation of diffusional transport of heat and its enhancement in phase-change thermal energy storage systems,   Applied Thermal Engineering, Vol. 111, 1611-1621, (2017).

Y. Nimdeo, Y.M. Joshi, and K. Muralidhar, Diffusion of charged nano-disks in aqueous media: Influence of competing inter-particle interactions and thermal effects, Chemical Engineering Science, Volume 164, pp. 71-80 (2017).

Mohanty D.P., Rao V L., Das S.L., Ghatak A., Polygonal deformation of a metallic foil subjected to impact by an axisymmetric indenter,   Journal of Adhesion Science and Technology, Vol. 31, 1647-1657, (2017).

Rao V.L., Roy S., Das S.L., Diffusion mediated coagulation and fragmentation based study of domain formation in lipid bilayer membrane,   Physica B: Condensed Matter, Vol. 505, 74-83, (2017).

Bhateja, A., I. Sharma and J.K. Singh., Segregation physics of a macroscale granular ratchet, Phys. Rev. Fluid Rapid Communication 2, 052301:1-9, (2017)

Choudhary V.P., Singh V.K., Dutta A., Design of an Optimal 4-bar Mechanism Based Gravity Balanced Leg Orthosis,   Journal of Intelligent and Robotic Systems: Theory and Applications, Vol. 86, 485-494, (2017).

Singh M.K., Dutta A., Subramanian V.K., Accurate three-dimensional documentation of distinct sites, Journal of Electronic Imaging, Vol. 26, (2017).

Purty R., Akanchha, Prasad S., “Isotopic characterization and thermal neutron flux determination of a PuBe neutron source,” Applied Radiation and Isotopes, 125, pp 144, (2017).

Santanu De, Ashoke De, Abhishek Jaiswal, Arpita Dash, Stabilization of lifted hydrogen jet diffusion flame in a vitiated co-flow: effects of jet and coflow velocities, coflow temperature and mixing, Int. J. Hydrogen Energy, 2016.

Balaji Suresh, De Ashoke, De Santanu. Numerical Investigation of Swirling Hydrogen Flames: Effect of Swirl and Fuel Jet in Coherent Structures, J. Energy Environmental Sustainability, 2016, 1, 19-33. .

C. Straub, Santanu De, K. Vogiatzaki, A. Kronenburg, The effect of time scale variation in multiple mapping conditioning mixing of PDF calculations for Sandia Flame series (D-F), Combustion Theory and Modelling, 2016, DOI: 10.1080/13647830.2016.1191677. .

Arya M., Khandekar S., Pratap D., Ramakrishna S. A., Pool Boiling of Water on Nano-structured Micro-wires at Sub-atmospheric Conditions, Heat and Mass Transfer, Vol. 52(9), pp. 1725-1737, (2016).

Sharma Nikhil, Agarwal Kumar Avinash, “Microscopic and Macroscopic Spray Characteristics of GDI Injector Using Gasohol Fuels at Various Injection Pressures”, SAE 2016-01-0868, SAE Special Publication-2016

Gupta Gopal Jai, Agarwal Kumar Avinash, “Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends”, SAE 2016-01-0869, SAE Special Publication-2016.

Patel Chetankumar, Sharma Nikhil, Tiwari Nachiketa, Agarwal Kumar Avinash, “Effects of Spray Droplet Size and Velocity Distributions on Gaseous Emissions from a Single Cylinder Biofuel Engine”, SAE 2016-01-0994, SAE Special Publication-2016. .

Agnihotri S.K., Parameswaran V., Mixed-mode fracture of layered plates subjected to in-plane bending, International Journal of Fracture, Vol. 197, 63-79, (2016). .

Ahmed F., Deb K., Bhattacharya B., Structural topology optimization using multi-objective genetic algorithm with constructive solid geometry representation, Applied Soft Computing Journal, Vol. 39, 240-250, (2016). .

Asfer M., Mehta B., Kumar A., Khandekar S., Panigrahi P.K., Effect of magnetic field on laminar convective heat transfer characteristics of ferrofluid flowing through a circular stainless steel tube, International Journal of Heat and Fluid Flow, Vol. 59, 74-86, (2016). .

Banerjee S., Kar K.K., Synergistic effect of aluminium phosphate and tungstophosphoric acid on the physicochemical properties of sulfonated poly ether ether ketone nanocomposite membrane, Journal of Applied Polymer Science, Vol. 133, (2016). .

Banerjee S., Kar K.K., Superior water retention, ionic conductivity and thermal stability of sulfonated poly ether ether ketone/polypyrrole/aluminum phosphate nanocomposite based polymer electrolyte membrane, Journal of Environmental Chemical Engineering, Vol. 4, 299-310, (2016). .

Basak A., Gupta A., Plasticity in multi-phase solids with incoherent interfaces and junctions, Continuum Mechanics and Thermodynamics, Vol. 28, 423-442, (2016). .

Bhateja A., Sharma I., Singh J.K., Scaling of granular temperature in vibro-fluidized grains, Physics of Fluids, Vol. 28, -, (2016). .

Biswal S.K., Mohapatra P.K., Muralidhar K., Transitional Flow In A Right-Angled Compound Open Canal Junction, Irrigation and Drainage, Vol. 65, 73-84, (2016). .

Biswas S., Jana P. and Chatterjee A. Hysteretic damping in an elastic body with frictional microcracks. International Journal of Mechanical Sciences, vol. 108-109, 2016, 61-71. [DOI:10.1016/j.ijmecsci.2016.01.029] .

Orra Kashfullv, Choudhury K. Sounak, “Development of Flank Wear model of cutting tool by using Adaptive Feedback Linear Control System on machining AISI D2 steel and AISI 4340 steel” Mechanical Systems and Signal Processing, 2016, Vol. 81, pp. 475-492. .

Datta R., Deb K., Uniform adaptive scaling of equality and inequality constraints within hybrid evolutionary-cum-classical optimization, Soft Computing, Vol. 20, 2367-2382, (2016). .

Datta R., Pradhan S., Bhattacharya B., Analysis and Design Optimization of a Robotic Gripper Using Multiobjective Genetic Algorithm, IEEE Transactions on Systems, Man, and Cybernetics: Systems, Vol. 46, 16-26, (2016). .

Datta R., Regis R.G., A surrogate-assisted evolution strategy for constrained multi-objective optimization, Expert Systems with Applications, Vol. 57, 270-284, (2016). .

Datta R., Jain A., Bhattacharya B., A piezoelectric model based multi-objective optimization of robot gripper design, Structural and Multidisciplinary Optimization, Vol. 53, 453-470, (2016). .

Visakh M.G., Saha A.K., Muralidhar K., Effect of spanwise shear on flow past a square cylinder at intermediate Reynolds numbers, Physics of Fluids, Vol. 28, -, (2016). .

Faye A., Parameswaran V., Basu S., Dynamic fracture initiation toughness of PMMA: A critical evaluation, Mechanics of Materials, Vol. 94, 156-169, (2016). .

Ghosh A., Guha S.K., Linear stability analysis of finite hydrodynamic journal bearing under turbulent lubrication with coupled-stress fluid, Industrial Lubrication and Tribology, Vol. 68, 386-391, (2016). .

Ramgadia, A. G., Saha, A. K., "Three-dimensional Numerical Study of Turbulent Numerical Study of Fully Developed Unsteady Flow and Heat Transfer in Asymmetric Wavy Channels", Int J. Heat Mass Transfer, Vol. 102, pp. 98-112, 2016. .

Guha A., Mechoso C.R., Konor C.S., Heikes R.P., Modeling rossby wave breaking in the southern spring stratosphere, Journal of the Atmospheric Sciences, Vol. 73, 393-406, (2016). .

Gupta S.K., Wahi P., Global axial-torsional dynamics during rotary drilling, Journal of Sound and Vibration, Vol. 375, 332-352, (2016). .

Hora T.S., Agarwal A.K., Effect of varying compression ratio on combustion, performance, and emissions of a hydrogen enriched compressed natural gas fuelled engine, Journal of Natural Gas Science and Engineering, Vol. 31, 819-828, (2016). .

Hora T.S., Shukla P.C., Agarwal A.K., Particulate emissions from hydrogen enriched compressed natural gas engine, Fuel, Vol. 166, 574-580, (2016). .

Khan M.P., Singh A.K., Singh A.K., Shrivastava P., Tiwari M.C., Nagar G.K., Bora H.K., Parameswaran V., Sanyal S., Bellare J.R., Chattopadhyay N., Odanacatib Restores Trabecular Bone of Skeletally Mature Female Rabbits with Osteopenia but Induces Brittleness of Cortical Bone: A Comparative Study of the Investigational Drug with PTH, Estrogen, and Alendronate, Journal of Bone and Mineral Research, Vol. 31, 615-629, (2016). .

Kumar A., Logapperumal S., Sharma R., Das M.K., Kar K.K., Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly (vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte, Solid State Ionics, Vol. 289, 150-158, (2016). .

Kumar P., Sauer R.A., Saxena A., Synthesis of C0 Path-Generating Contact-Aided Compliant Mechanisms Using the Material Mask Overlay Method, Journal of Mechanical Design, Transactions of the ASME, Vol. 138, -, (2016). .

Kuponu O.S., Kadirkamanathan V., Bhattacharya B., Pope S.A., Using feedback control to actively regulate the healing rate of a self-healing process subjected to low cycle dynamic stress, Smart Materials and Structures, Vol. 25, -, (2016). .

Mistri G.K., Aggarwal S.K., Longman D., Agarwal A.K., Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging, Journal of Energy Resources Technology, Transactions of the ASME, Vol. 138, -, (2016). .

Sharma V., Sinha N., Dutt S., Chawla M., Siril P.F., Tuning the surface enhanced Raman scattering and catalytic activities of gold nanorods by controlled coating of platinum, Journal of Colloid and Interface Science, Vol. 463, 180-187, (2016). .

Sharma I., Stability of binaries. Part II: Rubble-pile binaries, Icarus, Vol. 277, 125-140, (2016). .

Sharma BL, "On energy balance and the structure of radiated waves in kinetics of crystalline defects”, Journal of the Mechanics and Physics of Solids, May 2016 (accepted) .

Sharma BL, "Wave propagation in bifurcated waveguides of square lattice strips”, SIAM Journal on Applied Mathematics, Apr 2016 (accepted). .

Sharma B.L., Edge diffraction on triangular and hexagonal lattices: Existence, uniqueness, and finite section, Wave Motion, Vol. 65, 55-78, (2016). .

Sharma B.L., Diffraction of waves on triangular lattice by a semi-infinite rigid constraint and crack, International Journal of Solids and Structures, Vol. 80, 465-485, (2016). .

Sarkar S., Babu H., Sadique J., Interactions of separation bubble with oncoming wakes by large-eddy simulation, Journal of Heat Transfer, Vol. 138, -, (2016). .

Saroj S.K., Asfer M., Sunderka A., Panigrahi P.K., Two-fluid mixing inside a sessile micro droplet using magnetic beads actuation, Sensors and Actuators, A: Physical, Vol. 244, 112-120, (2016). .

Pradhan Kumar Tapan, Panigrahi Kumar Pradipta “Influence of an adjacent droplet on fluid convection inside an evaporating droplet of binary mixture” Colloids and Surfaces A: Physicochemical and Engineering Aspects,Vol. 500, pp. 154-165 (2016). .

Samson A., Sarkar S., Effects of free-stream turbulence on transition of a separated boundary layer over the leading-edge of a constant thickness airfoil, Journal of Fluids Engineering, Transactions of the ASME, Vol. 138, -, (2016). .

Saha A., Wahi P., Bhattacharya B., Characterization of friction force and nature of bifurcation from experiments on a single-degree-of-freedom system with friction-induced vibrations, Tribology International, Vol. 98, 220-228, (2016). .

Rahaman A., Kar K.K., E-glass fibers coated with nickel phosphorous by electroless deposition technique, Composite Interfaces, Vol. 23, 689-699, (2016). .

Pal A., Agarwal A.K., Effect of laser pulse energy on laser ignition of port fuel injected hydrogen engine, International Journal of Hydrogen Energy, Vol. 41, 675-682, (2016). .

Nath D., Kalra M.S., Munshi P., Numerical simulation of time-dependent Navier-Stokes and MHD equations using a meshless method based on fundamental and particular solutions, Engineering Analysis with Boundary Elements, Vol. 67, 81-95, (2016). .

Nath D., Kalra M.S., Munshi P., Application of MFS-MPS to the current-hole simulation in a Tokamak, Computers and Mathematics with Applications, Vol. 71, 1706-1721, (2016). .

Nimdeo Y., Joshi M. Y., and Muralidhar K., Refractive Index Measurement of Sol Forming Laponite JS Dispersion Using Interferometry, accepted for publication in Applied Clay Science (2016). .

Pradhan B., Kundu D., Bayes estimation for the Block and Basu bivariate and multivariate Weibull distributions, Journal of Statistical Computation and Simulation, Vol. 86, 170-182, (2016). .

Biswal K.S., Mohapatra K. P., and Muralidhar K., Hydraulics of combining flow in a right-angled open channel junction, to appear in Sadhana (2016). .

Usmani A. and Muralidhar K., Oscillatory flow in an enlarged compliant vasculature, accepted for publication in Biomedical Physics & Engineering Express (2016) .

Katiyar J.K., Sinha S.K., Kumar A., Effects of carbon fillers on the tribological and mechanical properties of SU-8, Tribology - Materials, Surfaces & Interfaces, Vol. 10, 33-44, (2016). .

Mahato A., Kumar A., Modeling transport phenomena of ice slurry in an ice forming unit, International Journal of Refrigeration, Vol. 69, 205-222 (2016). .

Katiyar J.K., Sinha S.K., Kumar A., Friction and wear durability study of SU-8 composites with talc and graphite as fillers, Wear, http://dx.doi.org/10.1016/j.wear.2016.06.011 (2016). .

Katiyar J.K., Sinha S.K., Kumar A., Effect of graphite concentration on the tribological and mechanical properties of filled SU-8”, Tribology Online, Vol. 11(2), 152-158 (2016). .

Yadav M. K., Khandekar S. and Sharma P., An Integrated Approach to Steam Condensation Studies inside Reactor Containments: A Review, Nuclear Engineering and Design, Vol. 300, pp. 181-209, 2016, DOI: 10.1016/j.nucengdes.2016.01.004.

Raghunandan Sharma and Kamal K. Kar, "Sustainably-derived nitrogen, oxygen and sulphur containing nanostructured carbon from poultry featherfiber as electrocatalyst for oxygen reduction reaction. ", Electrochimica Acta, International Society of Electrochemistry, Vol:191, pp:876-886, Year: 2016, doi:10.1016/j.electacta.2016.01.166, ISSN: 0013-4686, Elsevier B.V., UK.