Journal

  1. N. P. Yadav and A. Kushari, “Flow Dynamics in Low Aspect Ratio Dump Combustor”, Propulsion and Power Research, 3(4), 2014, pp. 187-195.2)
  2. R. Yadav, A. Kushari and A. De, “Modeling of turbulent lifted flames in vitiated co-flow using multi environment Eulerian PDF transport approach”, International Journal of Heat and Mass Transfer, Volume 77, 2014, pp. 230-246.3)
  3. M. C. Keerthi and A. Kushari, “Effectiveness of Vortex Generator Jets and Wall Suction on Separated Flows in Serpentine-duct Diffuser”, Aerospace Science and Technology, Volume 34, Issue 1, 2014, pp. 12-19.
  4. Abhijit Kushari, Vinayak Eswaran, Rakesh Yadav and Atul Verma, “A Detailed Validation Study of Multi-Environment Eulerian PDF Method for Modeling Turbulent Non-Premixed Combustion”, Journal of Engineering for Gas Turbine and Power- Transactions ASME, Volume 136, Issue 8, 2014, Article number 081506.
  5. Tushar Sikroria, Abhijit Kushari, Saadat Syed and Jeffery A. Lovett, “Experimental Investigation of Liquid Jet Breakup in Cross Flow Of Swirling Air Stream”, Journal of Engineering for Gas Turbine and Power- Transactions ASME, Volume 136, Issue 6, 2014, Article number 061501.
  6. M. Ananth, A. Kushari and C. Venkatesan, “Quasi Steady Prediction of Coupled Bending – Torsion Flutter under Rotating Stall”, Journal of Fluids and Structures, 43, 2013, pp. 402-427.
  7. Pandey, A. De, A. Kushari, “ Reacting flow and emission characteristics in a liquid fuelled aircraft engine combustor “, International Journal of ChemTech Research , 5 (2) , 2013, pp. 912-917
  8. M. Ananth and A. Kushari, “A Hybrid Approach for the Modeling of Axial Compressor Surge”, International Journal of Turbo and Jet Engines, Vol. 30 (4), 2013, pp. 313-324.
  9. Rakesh Yadav, Kushari, V. Eswaran, Atul K. Verma, “Weighted Sum of Gray Gas Modeling for Non Gray Radiation in Combusting Environment using Hybrid Solution Methodology”, Numerical Heat Transfer, Part B: Fundamentals, 64(2), 2013, pp. 174-197.
  10. Suresh Lal, Meenakshi Gupta, A. Kushari, J. C. Kapoor and S. Maji, “Suppression of Pool Fire in a Large Enclosure with Water Mist”, International Journal of Spray and Combustion Dynamics, Vol. 5(3), 2013, pp. 181-199.
  11. S. M. Ananth and A. Kushari, “Effect of Throttle Conditions on Fluid Dynamic Instabilities in Axial Compression Systems”, Journal of the Institution of Engineers (India): Series C, Vol. 94(1), 2013, pp. 65-74.12) 
  12. S. M. Ananth and A. Kushari, “Quasi Steady Prediction of Coupled Bending – Torsion Flutter of Turbo-machinery blades under Classic Surge”, Journal of Applied Mechanics – Transaction ASME, Vol. 80, 2013, 051010-1 – 051010-15.13)
  13. N. P. yadav and A. Kushari, “Identification of the Cold Flow Perturbation Sources in a Dump Combustor with Tapered Exit”, Journal of Fluids Engineering – Transaction ASME, Vol. 135(1), 2013, 014502-1 – 014502-5. 14)
  14. Rakesh Yadav, A. Kushari, V. Eswaran, Atul K. Verma, “A  Numerical Investigation of the Eulerian PDF Transport approach for Modeling of Turbulent Non-Premixed Pilot Stabilized Flames”, Combustion and Flame, Vol. 160(3), 2013, pp. 618-63415)
  15. S. M. Ananth and A. Kushari, “A simple feedback control strategy for controlling the axial compressor surge”, International Journal of Flow Control, Vol. 4, no. 3-4, 2012, pp 109-123.16)
  16. S. M. Ananth and A. Kushari, “A Parametric Investigation of Geometric Variation on Fluid Dynamic Instabilities in Axial Compression Systems”, International Journal of Rotating Machinery, Volume 2012(2012), Article ID 687354, doi:10.1155/2012/687354.
  17. Sushant Chandra, M.C. Keerthi, A. Kushari, and R. K. Sullerey, “Flow control in serpentine inlet duct using vortex generator jets”, Journal of Aerospace Sciences and Technologies, Vol. 64, No. 3, 2012, pp. 169-175.
  18. P. Yadav and A. Kushari, “Passive Control of lifted flame in a dump combustor”, Fuel, Vol. 93, 2012, pp. 67-74.
  19. Dirbude, V. Eswaran and A. Kushari, “Droplet Vaporization Modeling of Rapeseed and Sunflower Methyl Esters”, Fuel, Vol. 92, 2012, pp. 171-179.
  20. N. P. Yadav and A. Kushari, “Spray formation in a Twin-Fluid Internally Mixed Atomizer with Tangential Air Intake”, Particle & Particle Systems Characterization, Vol. 28, Issue 1-2, 2011, pp. 25-32.
  21. S. Dirbude, V. Eswaran and A. Kushari, “Numerical modelling of droplet evaporation with convection for n-alkanes and kerosene fuel”, Atomization and Sprays, Vol. 21, Issue 9, 2011, pp. 787-798.
  22. Madanmohan, A. Kushari and K. Ramamurthi, “Thermo-Fluidic Instabilities in Cone Stabilized Non-premixed Combustor”, Applied Thermal Engineering, Vol. 31, 2011, pp. 3206-3213.
  23. Ansuman Pradhan and Abhijit Kushari, “Gold Catalysts, Along with Catalyzed HC Traps: Low Temperature Exhaust Emission Control”, Recent Patents on Mechanical Engineering, Vol. 4(3), 2011, pp. 262-269.
  24. Kushari, “A Heuristic Model of Twin Fluid Internally Mixed Atomization using Distributed Weber Number Criterion”, Particle & Particle Systems Characterization, Vol. 27, 2010, pp. 32-41.
  25. Sailaja, N P. Yadav, A. Kushari, “Computational Investigation of Cold Flow in a Dump Combustor with Tapered Exit”, Journal of Thermal Science and Engineering Applications- Transactions ASME, Vol. 2, 2010, pp. 011009-1-011009-7.
  26. Kelvin Loh and Abhijit Kushari, “Effect of Pressure Level on the Performance of an Auto-Initiated Pulsed Plasma Thruster”, Plasma Science and Technology, Vol. 12, No. 4, 2010, pp. 466-472.
  27. Kushari, “Effect of Injector Geometry on the Performance of an Internally Mixed Liquid Atomizer”, Fuel Processing Technology, Vol. 91, Issue 11, 2010, pp. 1650 – 1954.
  28. Suresh Lal, A. Kushari, M. Gupta, J. C. Kapoor and S. Maji, “Experimental Study of an Air Assisted Mist Generator”, Experimental Thermal and Fluid Science, Vol. 34, 2010, pp. 1029-1035.
  29. P. Yadav and A. Kushari, “Effect of Swirl on the Turbulent Behavior of a Dump Combustor Flow”, Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, Vol. 224, No. 6, 2010, pp. 705 -717.
  30. Abhijit Kushari and Kelvin Loh, “Operation of an Auto-Initiated Pulsed Plasma Thruster”, Aircraft Engineering and Aerospace Technology, Vol. 82, Issue 2, 2010, pp. 83-90.
  31. Ramraj H. Sundararaj and Abhijit Kushari, “Slotted Orifice Plate Flow Meter”, Recent Patents on Mechanical Engineering, Vol. 3, 2010, pp. 149-153.
  32. Suresh Lal, A. Kushari, J. C. Kapoor, S. Maji, “Modeling of Externally Mixed Air-blast Atomizer”, International Journal of Dynamics of Fluids, Vol. 6, No. 1, 2010, pp. 25-40.
  33. Suresh Lal, J.C Kapoor, A Kushari, S. Maji, “Suppression of Diffusion Flame in Cup Burner Apparatus”, International Journal of Applied Engineering Research, Vol. 4, No. 12, 2009, pp. 2573-2586.
  34. Bagchi, S. K Gupta, A. Kushari, N. G. R. Iyengar, “Experimental Study of Pressure Fluctuations and Flow Perturbations in Air flow through Vibrating Pipes”, Journal of Sound and Vibration, Vol. 328, 2009, pp. 441-455.
  35. P. Yadav and Abhihit Kushari, “Vortex Combustion in a low aspect ratio dump combustor with tapered exit,” Energy Conversion and Management, Vol. 50, 2009, pp. 2983-2991.
  36. Karmakar and A. Kushari, “Pressure Fluctuations in the Flow through a Low Aspect Ratio Dump Combustor with Tapered Exit,” International Journal of Fluid Mechanics Research, Vol. 36, 2009, pp. 513-523.
  37. Krishna, R. Surit, A. Kushari and A. K. Ghosh, “Anomalies of the flow over projectiles with wrap around fins,” Defence Science Journal, Vol. 59(5), 2009, pp. 471-484.
  38. P. Yadav and A. Kushari, “Visualization of recirculation in low aspect ratio dump combustor,” Journal of Flow Visualization and Image Processing, Vol. 16(2), 2009, pp. 127-136.
  39. Srikanth, J. Karnawat and A. Kushari, “The Effect of Charge Density on Electro-Sprayed Droplets,” The Open Applied Physics Journal, Vol. 2, 2009, pp. 53-57.
  40. Nigam, D. Ahmed and A. Kushari, “Macroscopic Flow Behavior in a Low Aspect Ratio Dump Combustor with Tapered Exit,” International Journal of Turbo and Jet Engines, Vol. 26(1), 2009, pp 19-31.
  41. Madanmohan, S. Pandey, A. Kushari and K. Ramamurthi”, Combustion Oscillations in Bluff body stabilized Diffusion Flames with Variable Length Inlet”, Journal of Engineering for Gas Turbine and Power- Transactions ASME, Vol. 131, 2009, 054501-1 – 054501-4.
  42. Pathak, A. Kushari and C. Venkatesan, “Effects of Geometric and Structural Parameters on Coupled Bending Torsion Flutter in Turbo Machinery Blades,” International Journal of Turbo and Jet Engines, Vol. 25, No. 3, 2008, pp 163-178.
  43. Kushari and P. Barman, “Primary Liquid Breakup in a Pressure-Swirl Atomizer”, International Journal of Fluid Mechanics Research, Vol. 35, No. 4, 2008, pp 354-364.
  44. G. Dutta, Ankur Singhal, A. Kushari and A. K. Ghosh, “Estimation of Drag Coefficient from Radar-tracked Flight Data of a Cargo Shell”, Defence Science Journal, vol 58, no. 3, 2008, pp 377-389.
  45. K. Gupta, A. Kushari, C. S. Upadhyay and C. Venkatesan, “Device for 3 D Surface Profile Measurements” Recent Patents on Mechanical Engineering, vol. 1, no. 2, 2008, pp 116-122.
  46. Karnawat and A. Kushari” Spray Evolution in a Twin-Fluid Swirl Atomizer”, Atomization and Sprays, vol. 18, no. 5, 2008, pp 449-470.
  47. Sanjeev Pandey and A. Kushari, “A Controllable twin-fluid internally mixed swirl atomizer”, Recent Patents on Mechanical Engineering, 2008, 1, 45-50.
  48. Kushari, “A phenomenological two-phase flow model of atomization in an Internally Mixed Liquid Atomizer”, International Journal of Turbo and Jet Engines, vol. 24, no. 3, 2007, pp 183-194.
  49. Karnawat and A. Kushari, “Controlled Atomization using a twin-fluid swirl atomizer” Experiments in Fluids (2006) 41: 649-663.
  50. Gupta, V. Garg and A. Kushari, “Spectroscopic Analysis of a Premixed LPG-Air Flame”, Institution of Engineers (India), Mechanical Journal, 2006, vol. 87, pp: 8-12.
  51. Dubey, V. Ravi and Abhijit Kushari,” Discharge Frequency Modulation of Pulsed Plasma Thruster”, AIAA Journal of Spacecraft and Rockets 2005, vol. 42, no. 4, pp 761-765.
  52. Kushari, Y. Neumeier, O. Israeli, E. Lubarsky and B. T. Zinn, “Internally Mixed Liquid Injector for Active Control of Atomization Process”, Journal of Propulsion and Power, Vol. 17, No. 4, 2001, pp. 878-882.
  53. Kushari, L. J. Rosen, J. I. Jagoda and B. T. Zinn, “The effect of heat content and composition of fuel on pulse combustor performance”, Symposium (International) on Combustion, Vol. 26, Issue 2, 1996, pp. 3363-336.